One of the reasons I keep picking Gerber over Leatherman ...
-
@Zed said:
Its funny as the only leathermans that hurt my hands are the ST/ST300 and the pst/pst2 and pulse,ive never felt that my old wave is that uncomfortable in plier position,oddly prefer it to the charge,i did find the mp800 comfortable if not a tad too chunky,It's been ages since I've had a go with an old style Wave. Do the handles sit differently to the new style?
-
@SteveC said:
Great job ! I'm sure this will be very helpful for people
Maybe you could have the title of the thread Include "Comparisons of handle spread of various pliers in multi tools" so someone searching for this info could find it easier.
I'm not sure how big a title can be :D Maybe the mods will suggest something if they feel it needs to be easy to search for .....
-
@50ft-trad said:
Adjustable arc joint and slip joint pliers overcome the problem of having the handles too close or too far apart when gripping an item. That's why I often carry a Knipex Cobra pliers.
Incorporating that into a reasonably sized multitool which also has a wire cutter would be interesting.
... and I'll dig out the Wichard tool too ... This has slipjoint, chrome plated, forged pliers ... and I'm pretty sure it has a small wire cutting area too. Unfortunately it's a bit limited with other tools. A flat driver/pry thing on the end of the plier handle, a semi serrated blade, and a can opener/caplifter
Schrade also used to make an MT with slipjoint pliers: the Schrade ST5 (and the Craftsman Professional 45471 re-labelled version). The pliers are reputed to be quite robust due to the laminated and overlapping construction of the jaws.
-
@50ft-trad said:
Adjustable arc joint and slip joint pliers overcome the problem of having the handles too close or too far apart when gripping an item. That's why I often carry a Knipex Cobra pliers.
Incorporating that into a reasonably sized multitool which also has a wire cutter would be interesting.
... and I'll dig out the Wichard tool too ... This has slipjoint, chrome plated, forged pliers ... and I'm pretty sure it has a small wire cutting area too. Unfortunately it's a bit limited with other tools. A flat driver/pry thing on the end of the plier handle, a semi serrated blade, and a can opener/caplifter
Schrade also used to make an MT with slipjoint pliers: the Schrade ST5 (and the Craftsman Professional 45471 re-labelled version). The pliers are reputed to be quite robust due to the laminated and overlapping construction of the jaws.
I never realised that tool had slipjoint pliers

Wasn't that one a hellish tool to try and use?
-
@50ft-trad said:
I had considered the Diesel way back when I was debating what Gerber MT to get for my second one. Now you're making me want to get one just to check it out >:D
I think I was trying to sway you when you were looking at the Flik (?)
but you wouldn't listen :PYeah you were ;) Maybe someday when I feel the need to buy another MT to try, I will get the Diesel. I think it will be at least one of the ones I consider anyway. I really don't think I have much need at this point to get anything else, unless there's something new someday that really appeals to me.
-
@50ft-trad said:
@50ft-trad said:
Adjustable arc joint and slip joint pliers overcome the problem of having the handles too close or too far apart when gripping an item. That's why I often carry a Knipex Cobra pliers.
Incorporating that into a reasonably sized multitool which also has a wire cutter would be interesting.
... and I'll dig out the Wichard tool too ... This has slipjoint, chrome plated, forged pliers ... and I'm pretty sure it has a small wire cutting area too. Unfortunately it's a bit limited with other tools. A flat driver/pry thing on the end of the plier handle, a semi serrated blade, and a can opener/caplifter
Schrade also used to make an MT with slipjoint pliers: **the Schrade ST5 (and the Craftsman Professional 45471 **re-labelled version). The pliers are reputed to be quite robust due to the laminated and overlapping construction of the jaws.
**I never realised that tool had slipjoint pliers

Wasn't that one a hellish tool to try and use?**
I haven't put mine to heavy usage as they are a bit rare these days, but I haven't noticed any particular issues. They are fairly large and heavy. If you can remember what specific problem there was I'll check it out on my examples.
-
@50ft-trad said:
I never realised that tool had slipjoint pliers
Wasn't that one a hellish tool to try and use?
The individual blades on my Sears Craftsman version were very difficult to open. They were riveted so no adjustment was possible. That's why the Schrade version is known as the Schrade Tough to Open tool. :)
The pliers worked OK. Though the photo doesn't show it, the pliers was a slip joint affair with 2 positions.
Link to user manual: http://wiki.multitool.org/tiki-browse_image.php?imageId=393

-
@50ft-trad said:
Its funny as the only leathermans that hurt my hands are the ST/ST300 and the pst/pst2 and pulse,ive never felt that my old wave is that uncomfortable in plier position,oddly prefer it to the charge,i did find the mp800 comfortable if not a tad too chunky,
It's been ages since I've had a go with an old style Wave. Do the handles sit differently to the new style?
there rounded and smooth as no inches/mm ruler and they dont have the cover that goes upto the pliers,very comfy though,i personally still cant find a mt that compares to the old wave ,its the mt i judge others by,

-
Greg ... I can't remember what the specific problem was. I remember something about being difficult to grip because of the angle on the handles, but I thought these was something else too ...

parnass ... Thanks mate

Paul ... Cheers mate
Can you remember if the handle spread/angle is about the same on the new and the old? -
I was thinking earlier about the Leatherman Leap, and wondering what kind of a job they did on that with the tool being designed for hands much smaller and weaker than mine. Did they make the same "errors", or have they had the foresight to make amendments to how they do stuff. I don't have a Leap, but there's some great photos on here from Chako, which compare the tool to a Juice.
I hope he doesn't mind if I borrow a couple ...

This photo of Dan's shows that despite having far less tools than a XE6, they have somehow bulked the handles up to the same size. The fact there are plenty of "soft" edges for a comfortable grip is great, but surely they could have made it a bit more size efficient for a smaller hand. However, from another one of Dan's pics, it looks like they did do a couple of things which may make the Leap rate better than the Juice in this thread if I had photographed it the same way.
Let's have a quick reminder of the Juice first though ...


... and now a look at Dan's side-by-side shot ...

The first thing I noticed is that the handles on the pliers in the closed position seem to be more parallel than they do on the Juice. This means that whilst gripping something, the hands will be less inclined to try sliding forwards to the pliers head. Possibly even more so based on the materials used. The second thing is that the main gripping section is further forwards away from the pivot. This also means that the pliers have to open to a lesser angle on the Leap to hold something the same size. I don't know how much thought they put into this aspect, based on the fact the handles seem fatter than they need to be, but at least they did improve the grip slightly for smaller hands in other ways.
Two out of three isn't bad I suppose :P
-
You're using your pliers wrong. You'll get much better leverage and a more controllable grip if you slip your pinky off the handles entirely and use just your index, middle, and ring fingers, but as close to the ends of the handles as possible. Use the plier handles as a lever to gain maximum mechanical advantage and remember that a little extra lever length is much more useful than your pinky being in the most advantageous position.
-
@Yalius said:
You're using your pliers wrong. You'll get much better leverage and a more controllable grip if you slip your pinky off the handles entirely and use just your index, middle, and ring fingers, but as close to the ends of the handles as possible. Use the plier handles as a lever to gain maximum mechanical advantage and remember that a little extra lever length is much more useful than your pinky being in the most advantageous position.If I understand you correctly, then you are suggesting to grip further back. However, the whole point of this thread is that the handles need to open very wide, gripping further back only intensifies the issue.
-
You're using your pliers wrong. You'll get much better leverage and a more controllable grip if you slip your pinky off the handles entirely and use just your index, middle, and ring fingers, but as close to the ends of the handles as possible. Use the plier handles as a lever to gain maximum mechanical advantage and remember that a little extra lever length is much more useful than your pinky being in the most advantageous position.
If I understand you correctly, then you are suggesting to grip further back. However, the whole point of this thread is that the handles need to open very wide, gripping further back only intensifies the issue.
^^^ This!
I took all this photos the same way (with the wrong hand) for illustrative purposes just to show the amount of grip I have/haven't got available on the various tools. I will obviously adjust my grip according to what I'm doing, but if the grip is too splayed, or gripping further back on the handles takes the grip out of efficiency, then that's not going to offer any advantage whatsoever. Probably the reverse. In fact if you look at the photos, I would be unable to achieve that grip at all on many of the items shown ... and that's with size 9 hands. People with smaller hands would find them even worse.
-
No issues with the photo borrowing. All MT.O members can borrow them.
As for the finger extensions...classic.

-
We need a cobra pliers based multitool for small hand people. And I also look for a small knipex, but damn they are so expensive here...
Another way is to have handle with a very small angle when pliers are closed, reducing the angle when they are at full opening. -
:D :D
@Yalius said:
You're using your pliers wrong. You'll get much better leverage and a more controllable grip if you slip your pinky off the handles entirely and use just your index, middle, and ring fingers, but as close to the ends of the handles as possible. Use the plier handles as a lever to gain maximum mechanical advantage and remember that a little extra lever length is much more useful than your pinky being in the most advantageous position.This has actually given me an idea for an additional comparison which factors in both our standpoints ... I'll think through how best to approach it ...
-
@hellsing said:
We need a cobra pliers based multitool for small hand people. And I also look for a small knipex, but damn they are so expensive here...
Another way is to have handle with a very small angle when pliers are closed, reducing the angle when they are at full opening.They're expensive here too ...
One thing you have to be careful of when the pliers are closed is avoiding a pinch hazard like on the original Gerber multipliers. They hurt!!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


