Weapons centric multi-tools.
-
That concludes my collection of weapon centric multi-tools. I hope that you guys enjoyed it as much as I did in creating it.

.
-
Unknown bow tool with bow square.
I found this one online, and what drew me to this tool was the folding bow square that came with it. It certainly wasn't the multi-tool itself, as this is decidedly on the cheaper end of generic tools of its ilk.
The multi-tool does have spring loaded jaws, a set of small hex wrench, and a somewhat small PE and serrated knives, a small Phillips driver, and combo bottle opener/flat screwdriver.
The pliers do have the capability of setting nocks, which of course is where the bow square comes in.
Summary:
Pro:
- The folding bow square is included.
Cons:
- Cheap as dirt build and construction of the multi-tool.
-
SOG Powerlock EOD 2.0.
I had forgotten I had this tool. A regular Powerlock with the addition of a C4 spike. Not as good as other EOD efforts by other companies, especially when viewed from the standpoint that no fuse cap crimper is included as a function of the pliers.
A closer look at the C4 spike.
Compound leverage pliers are a SOG specialty.
Yes, being an older version, it has piano hinge locking levers.
Summary:
Pro:
- SOG compound leverage pliers.
- Good quality throughout.
Cons:
- Piano hinge locking levers are a pain to use. They replaced these on the newer versions with a single larger lever.
- No Cap crimper functionality as seen on the Gerber and Leathermans.
- No 8/32 threading to mesh with cleaning kits.
-
Outdoor Edge Sportsman's Multi-tool.
This is a multi-tool from a company called Outddor Edge. They also produce a Trekker tool for hikers. This is their Sportsman model.
The sheath is of average quality. Nothing fantastic, but very serviceable and should last for a while.
Once you open the sheath, you will come across two sections, the first holds the extensive driver bit kit in its plastic carrier, and the tool itself in the posterior larger compartment.
One of my photography assistants was at hand to help in the photo shoot.
And the finished product shot.
The Sportsman model is another archery focused multi-tool as it features a nock set plier function as well as a broadhead wrench.
The pliers are of interest as they are not needle nosed.
Summary:
Pro:
- Heavy and well built.
- Offers the archer a few nice specific features.
- The best designed awl in my opinion.
- Nice V notch cutter.
Cons:
- Fit and finish not the best in class.
-
Ok, now I think that might be it...unless I come across any others in my searches.
:D -
Really wish that Gerber adjustable hammer oriented mt wasn't a bow tool. That would be pretty handy
Sent from my LG-E980 using Tapatalk
-
Are you talking about the Gerber Myth Archery Tool? There is no hammer function on that one.

-
Got it. Yeah, The back spined located broadhead wrench could easily be ignored, if all the other tools are useful.
-
I hear you. It would make a neat little EDC.
-
Another great post Chako!! I also have the OTIS with the BO Gerber. Great stuff!
-
Smith and Wesson Universal Armorer Tool.
Here is something a little different, and a tool I just received today. Before we begin, Smith and Wesson tools are made by Taylor Brand LLC. I tend to not have high expectations when it comes to Taylor Brand products, but I guess in this instance, I was pleasantly surprised at the quality. Mind you, it is a rather simple tool to begin with.
The S&W Universal Armorer Tool is basically a very large pen like tool in which both ends unscrew, revealing a set of pin and punches required to work on a variety of weapons. The design eerily looks like a beefed up Multitasker Tube, which I can easily speculate might be the inspiration for this tool.
Apparently, there are two models out there. One is geared towards military and police folks, and features duplicate tools. That one is called model SWMPGT1. That tool has the following tools in duplicates:
1/16" Allen Wrench
1/8" Roll Tip Punch Pin
1/16" Flat Tip Punch Pin
M&P Slave Pin
1/16" Brass Flat Tip Punch PinThe Universal Armorer Tool carries the model designation SWUAT1, and has the following tools:
1/16" Allen Wrench
1/16" Roll Tip Punch Pin
1/8" Roll Tip Punch Pin
1/16" Flat Tip Punch Pin
1/8" Flat Tip Punch Pin
MS&W Slave Pin
1/8" Solid Punch Pin
1/8" Brass Flat Tip Punch Pin
1/8" Brass Roll Tip Punch Pin
1/32" Cut Tip Punch Pin
1/16" Cut Tip Punch Pin
1/8" Cut Tip Punch PinI went with the Universal one because I like variety.
The box looks like standard S&W gear.
One end of which carries the model number.
Once opened, there is no doubt that this is a Taylor Brands LLC product.
The MOLLE compliant sheath isn't all that bad. It features the S&W logo on the front flap.
Opening up the sheath, you are greeted with one fat pen looking tool, in a single compartment. The Velcro closure is on a big elastic. Not sure why, but I guess you could probably hand something there, like say, a small hammer, and still be able to close the flap.

And this is the tool.
Both ends unscrew around a center piece. On each end of that center piece is a round rubber piece with holes for the various tools.
Taylor Brands LLC sure loves the S&W logo.
On the tapered end of the tool, is a hole with a magnet at its base. The various punches and pins slide into the hole and are held in place via that magnet.
A close up of some of the tools.
And a look at both ends.
Summary:
Pro:
- A good assortment of pins and punches.
- Everything is self contained.
- Not bad construction in the aluminum body and threaded areas.
- Inclusion of a pocket clip or belt sheath.
Cons:
- Magnet could be stronger. Some of the pins and punches appear to be not very magnetic to begin with (the gold toned ones).
- Multi-tool dedicated at dis-assembly and assembly of firearms.
- Needs other tools to properly use this tool, such as a small mallet.
-
Comes in, looks around, wipes the dust off, exits. :D
-
-
Also, and this is just an idea...
Could you post a gargantuamly sized pictures of those tools ordered by Size, maybe with a Wave inbetween. You know, something like this:

-
Now that would be some time consuming work.
-
-
@Chako said:
SOG Powerlock EOD 2.0.I had forgotten I had this tool. A regular Powerlock with the addition of a C4 spike. Not as good as other EOD efforts by other companies, especially when viewed from the standpoint that no fuse cap crimper is included as a function of the pliers.
A closer look at the C4 spike.
Compound leverage pliers are a SOG specialty.
Yes, being an older version, it has piano hinge locking levers.
Summary:
Pro:
- SOG compound leverage pliers.
- Good quality throughout.
Cons:
- Piano hinge locking levers are a pain to use. They replaced these on the newer versions with a single larger lever.
- No Cap crimper functionality as seen on the Gerber and Leathermans.
- No 8/32 threading to mesh with cleaning kits.
[Aleph78 USES THREAD NECRO]
[IT'S SUPER EFFECTIVE!]
Just had a look at my BO Powerlock EOD and was thinking, isn't that a cap crimper right under the plier head?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


























