Awls and Chisels for LM Charge, Wave, Surge
-
Nice job Tim! Looks like they turned out nicely! (Sorry about the slow reply, I'm about 500 miles away from home this week!)
I don't remember exactly how my 5/16 markings turned out. I'll have to check when I get back.
-
I see you added the little nicks in the side for the bit adapter detent to engage. Does it seem to click into place correctly for you?
-
@J-sews said:
I live in northern Michigan. I was born in northern Michigan, raised in northern Michigan, and spent my whole life in northern Michigan.I once took a trip all the way to Ohio, to see what the rest of the world was like, but then I came back to northern Michigan :)
Sounds like you finally made it a little farther than Ohio :D. Hope you're having a good trip.
The nicks in the side for the detent work pretty good. One side is closer to being the exact correct location than the other, so it engages better, but they seem to lock in pretty well on the awl. The ones on the chisel are a little looser since I ground a little too far and it's a little loose overall. The next one will be better ;)
I also noticed something else interesting. I have a LM E306X which has a bit driver as well. The awl bit still has a very slight taper (the shape of the original drill bit), which makes it slightly narrower at the base than at the top where the point starts (i.e., the sides aren't perfectly parallel like the LM bits are). It's much snugger in the E306X than it is in the Wave. In fact, I have to give it a pretty good push to get it to bottom out in the knife. I was surprised to see that the slots in the two bit drivers were different sizes.
-
An older post but such a wonderful tool idea.
I read this when I first joined was a great idea to me then and that made me think about it when I got my new wave. I think that I might just give that a try myself, it may be a while but I think i'll try it :D -
I went to buy a spade bit to make it, $6 each! $*@%, everything is still expensive as hell here.
-
-
(I forgot; where are you at?)
I'm 500 miles west of Def. :D
Even thou the canadian dollar almost doubled in value against usd the price basically stayed the same, and when people start to shopping south they now doing bunch of ads ask people to "shop local", riiiight... ::)
-
Bummer dude. :(
(I forgot; where are you at?)
I'm 500 miles west of Def. :D
Even thou the canadian dollar almost doubled in value against usd the price basically stayed the same, and when people start to shopping south they now doing bunch of ads ask people to "shop local", riiiight... ::)
With the Canadian dollar so high against the US dollar, and yet your prices haven't changed, somebody in between is pocketing some big money. :(
-
@J-sews said:
With the Canadian dollar so high against the US dollar, and yet your prices haven't changed, somebody in between is pocketing some big money. :(You got that right. Even with regular news coverage for months, retailers didn't budge on prices. There's not enough competition in many areas, so the quasi-monopolies can do what they want. We have no real alternatives in many cases...
-
With the Canadian dollar so high against the US dollar, and yet your prices haven't changed, somebody in between is pocketing some big money. :(
You got that right. Even with regular news coverage for months, retailers didn't budge on prices. There's not enough competition in many areas, so the quasi-monopolies can do what they want. We have no real alternatives in many cases...
Sorry to hear you ppl having it hard about exchange rate Canadian vs. US dollar if the rate is better then prices should drop but when ppl know they can get a certain price 4 something they usually don't want to drop the price >:(
-
Bob, finally got a 5/16 wood bit bought and intend to make an awl. Will let you know how it turns out whenever I get it done. I meant to do this some time ago. But forgot about it till the other day. :)
-
This old thread shows me I need to read more here

-
That didn`t take very long. Here are some in process pics. :)
-
Filing the lock notch and awl in bit card.
-
Awl in the TTi.
-
LM Surge chisel & LM Charge awl from Vic 8)


-
Hi Dave, good on you for finally getting it done!
Pretty easy wasn't it? :) Have you tested it out on anything yet?Nice looking work there Rahmed
Seems like a lot of different tools could be made to work in the Leatherman bit receptacle :) -
@J-sews said:
Hi Dave, good on you for finally getting it done!
Pretty easy wasn't it? :) Have you tested it out on anything yet?Bob it was much easier than I thought it would be. It seems the only tempering in that bit was only on the very end. So it was easy to file the bit into shape. No havent tried it out on any thing yet. This bit was pretty thin so it fit loose in the bit card. I used a little duct tape to take up the slack. Fits nice and tight now. :D
-
Hi Dave, good on you for finally getting it done!
Pretty easy wasn't it? :) Have you tested it out on anything yet?Bob it was much easier than I thought it would be. It seems the only tempering in that bit was only on the very end. So it was easy to file the bit into shape. No havent tried it out on any thing yet. This bit was pretty thin so it fit loose in the bit card. I used a little duct tape to take up the slack. Fits nice and tight now. :D
Cool! :) And it will definitely save the tip of your knife blade someday

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login