One of the reasons I keep picking Gerber over Leatherman ...
-
@50ft-trad said:
Excellent series of posts, 50ft-trad. I concur with several points concerning the ease of using Gerber vs. non-Gerber pliers, but I think the majority of your analysis addresses gripping larger objects.
I've been thinking about this again recently, and wondering if I ought to take a series of wire cuting pics. This may be a task that people need to do more frequently, and might be a better comparison for people. It might also show slightly different results, based on the shapes of the various plier heads.
Worth doing?
Yes.
I've done a lot of testing but never bothered with pics. -
@Cupboard said:
I've done some myself, I didn't put up pictures of every combination because it was getting silly.</topic/47745
Having a look back at that, I see that I didn't think the Wingman was too bad. Well I've currently god a Sidekick on my desk at work as an emergency spare, and the sire cutters on that are terrible. They just don't meet.
We might be at cross purposes here Tom. I wasn't thinking in terms of cutting performance, as you and 3rdpig have got that well sorted, but more in respect of ergonomics again. I was just a little mindful that whilst this comparison is within the capacities of the pliers (on most of them at least), it might be outside what users are liable to do regularly with their tools
-
.... and before I start thinking through how best to do this, there's a strong possibility that Gerber will have a distinct ***ergonomic ***advantage again on some tools, not just due to the handle differences as already highlighted, but because they sometimes choose anvil cutters rather than bypass. Bypass cutters have to open a way to become level, before opening further to accommodate the wire. I don't know how much a difference that's likely to make, but I'd imagine it will have at least some effect on the final handle position
-
@zoidberg said:
If I didn't use pliers on nuts I wouldn't bother carrying them. ::)Reading this i assume you are no trained mechanic/engineer? :D
Most of us hate nuts that are damaged by grabbing them with pliers, there are dedicated tools out there - and pliers are only an emergency tool for use on nuts.
-
If I didn't use pliers on nuts I wouldn't bother carrying them. ::)
Reading this i assume you are no trained mechanic/engineer? :D
Most of us hate nuts that are damaged by grabbing them with pliers, there are dedicated tools out there - and pliers are only an emergency tool for use on nuts.
I also hate nuts that are damaged because the last numpty to turn them used oversized, worn, or sprained spanners. In 25 years of engineering, I have come across plenty of hex nuts that can <u>**only **</u>be turned with pliers, waterpump pliers, and stilsons .... or hammer and chisel/screwdriver ::)
-
Lots of people here talk about using their pliers on nuts. I wouldn't dream of doing this unless it was an emergency.
If I didn't use pliers on nuts I wouldn't bother carrying them. ::)
+1
One of the reasons I carry a multiplier. To turn nuts and bolts when I am no where near a tool box, which tends to be a lot.Nate
-
@50ft-trad said:
I also hate nuts that are damaged because the last numpty to turn them used oversized, worn, or sprained spanners. In 25 years of engineering, I have come across plenty of hex nuts that can <u>**only **</u>be turned with pliers, waterpump pliers, and stilsons .... or hammer and chisel/screwdriver ::)I agree that sometimes pliers or more aggressive methods are needed - but only due to idiots who damaged the nuts before by using non-matching tools.
-
@50ft-trad said:
I also hate nuts that are damaged because the last numpty to turn them used oversized, worn, or sprained spanners. In 25 years of engineering, I have come across plenty of hex nuts that can <u>**only **</u>be turned with pliers, waterpump pliers, and stilsons .... or hammer and chisel/screwdriver ::)
I agree that sometimes pliers or more aggressive methods are needed - but only due to idiots who damaged the nuts before by using non-matching tools.
And when regular tools strip them out.
Nate
-
Even adjustable spanners are known as Nut F***ers.
-
LOL! I haven't heard that in a while.
Nate
-
@Syncop8r said:
Even adjustable spanners are known as Nut F***ers.That´s why i don´t use them.
The only one i own is a little (sized 4", up to 13mm) Facom adj. wrench, which i only use for very light tasks. I carry it at work in my pocket for the few moments my cart is not at my side. Mostly for holding the bolt head while using the correct sized wrench or socket on the nut.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
