Leatherman QC Fails
-
assuming that this was an one-off and they have not just changed the way they make the blades it may be of interest to collectors.
-
@bounding star said:
Just got a new Style CS, the nice little holes in the blade were missing. Not a real problem, but i liked those holes...

Could you please post a pic that shows the nail nick side of the blade.
Yup, interested to see it too. You tried to link to your dropbox, but as the picture isn't in your public folder we can't see it without your password. ;) Try moving it to the public folder or using Photobucket or attaching the picture to your post in the reply window +Attachments and other options
-
Totally did not notice that when I quoted it.

-
Sorry bout that, does this work?

-
Yes, it does.

Looks like they installed a Squirt blade into yours. The Style blade also has a bit of a bump on the back of the blade and the nail nick is lower.
-
and this one too apparently?
-
Hm, didn't notice the change. Both my Style and Style CS have the one with two small holes. Maybe they decided to only make one blade after they scrapped the Style.
It would be more economical to use the same blade on Squirts, Micras and Style CS than making a separate one for the Style CS only.So it seems you have a new batch blade on your tool, not QC fail.
-
Actually, the Micra's blade is different than the Style/squirts. The Micra's blade is smaller in chord, but very similar. The Style and Squirt blades begin as the same blank, but as noted the nail nicks end up in different places and they punch the two holes.
-
Hm, didn't notice the change. Both my Style and Style CS have the one with two small holes. Maybe they decided to only make one blade after they scrapped the Style.
It would be more economical to use the same blade on Squirts, Micras and Style CS than making a separate one for the Style CS only.So it seems you have a new batch blade on your tool, not QC fail.
Ahh, interesting
-
I think it's a good change, better leverage etc.
-
I just bought the Wave/Croc/Bit Extender pack online from MEC, I haven't looked too closely yet at the Wave itself (it'll be a present for my son) but I'm keeping the Croc for myself to spare my Surge from prying/chiseling type jobs.
It looks like this Croc might have slipped out of place before being stamped.
-
I was watching a doco about Victorinox the other day, and by the looks of it, Vic has just as many slip-ups in manufacturing as other companies such as leatherman, but they employ enough people, with enough skill, that Nothing with any sort of fault ever gets into the market.
Leatherman needs to do the same.
-
@bounding star said:
I was watching a doco about Victorinox the other day, and by the looks of it, Vic has just as many slip-ups in manufacturing as other companies such as leatherman, but they employ enough people, with enough skill, that Nothing with any sort of fault ever gets into the market.Leatherman needs to do the same.
It's near impossible to run a manufacturing process without almost regular amounts of scrap/waste. It's entirely an issue of whether or not a rigid quality control process meets the business objectives. If a certain amount of warranty expenditure proves justifiable in regard to higher margins then the QC is not going to be as stringent, thus lowering the amount of production scrap/waste.
Sent from my iPad using Tapatalk
-
Massive play on the scissors of my blue Micra. I have an SS one, that is fine of QC.
It doesn´t bother me much, but it needs to be named as a problem.
-
@hennypenny said:
I'm going to start with my Charge AL, which has the diamond file that rubs on the inside of the black scale handle.My new surge does the same thing with the file, though I think its just because the file is slightly bent and not a holder misalignment.

-
Ive only had one issue with my LMs
I bought a Surge and when I first went to close it (in the package it was opened up, a clamshell package) it was really hard to close and it marred the plier jaw (it hit one of the other tools as it closed).Then, after that, the handles were loose when closed.
Took it to the LM store and had a new one a minute later
Everyone is going to have QC issues here and there, things just slip through.
But I will say it was nice seeing the parts checked/tested at the LM factory when I did the tour.
But, again, everyone makes mistakes, not a big deal -
@Its Hard To Know said:
Ive only had one issue with my LMs
I bought a Surge and when I first went to close it (in the package it was opened up, a clamshell package) it was really hard to close and it marred the plier jaw (it hit one of the other tools as it closed).Then, after that, the handles were loose when closed.
Took it to the LM store and had a new one a minute later
Everyone is going to have QC issues here and there, things just slip through.
But I will say it was nice seeing the parts checked/tested at the LM factory when I did the tour.
But, again, everyone makes mistakes, not a big dealI've had more than my share of LM QC issues but to be fair, I've had a lot of perfect tools from them also. When they do get it right - it's pretty sweet!
-
I hope Leatherman improves their Quality Control, if they dont have any plans of doing so, might as well lower the price point. Blade play here and there, File Rub, Deep scratches and manufacturing irregularites out of the sealed clamshell package for that matter, etc etc.
They shouldnt wait till Victorinox Swisstool RS will have One Hand Opening Plain and Serrated Blades... Incorporate the design of their Rangergrip One Hand Opening blades with the Swisstool Series, Leatherman will have a problem.Sent from my SM-N920W8 using Tapatalk
-
@Paolo Enrico Pasco said:
I hope Leatherman improves their Quality Control, if they dont have any plans of doing so, might as well lower the price point. Blade play here and there, File Rub, Deep scratches and manufacturing irregularites out of the sealed clamshell package for that matter, etc etc.
They shouldnt wait till Victorinox Swisstool RS will have One Hand Opening Plain and Serrated Blades... Incorporate the design of their Rangergrip One Hand Opening blades with the Swisstool Series, Leatherman will have a problem.Sent from my SM-N920W8 using Tapatalk
Sadly the exact opposite has happened. The quality control has been going down and they somewhat recently increased prices by about 30%.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login