Leatherman QC Fails
-
Rise old thread! RISE!!
Ok, my file won't lock in on my wave. On closer inspection, the bump on the outside of the liner lock is half worn off from about 2 days of use from when I first got the wave new. Not only that, but the small hole in the file that the ball fits into to keep it locked in is far to small to fit the ball, so my file will open up whenever my wave is moved fast enough. Now I'm assuming the design of the hole and the ball are intentionally like that, but i cannot see how that is supposed to work, and the ball was pretty much ground like it is now from when i opened the box. the pictures are taken at pretty much the same distance so it should give you an idea of how much smaller the hole is. -
Surge blade play
Ps4 sloppy tools -
@bounding star said:
Rise old thread! RISE!!
Ok, my file won't lock in on my wave. On closer inspection, the bump on the outside of the liner lock is half worn off from about 2 days of use from when I first got the wave new. Not only that, but the small hole in the file that the ball fits into to keep it locked in is far to small to fit the ball, so my file will open up whenever my wave is moved fast enough. Now I'm assuming the design of the hole and the ball are intentionally like that, but i cannot see how that is supposed to work, and the ball was pretty much ground like it is now from when i opened the box. the pictures are taken at pretty much the same distance so it should give you an idea of how much smaller the hole is.This problem is exactly why the Wave and I never got along well.
-
@bounding star said:
Rise old thread! RISE!!
Ok, my file won't lock in on my wave. On closer inspection, the bump on the outside of the liner lock is half worn off from about 2 days of use from when I first got the wave new. Not only that, but the small hole in the file that the ball fits into to keep it locked in is far to small to fit the ball, so my file will open up whenever my wave is moved fast enough. Now I'm assuming the design of the hole and the ball are intentionally like that, but i cannot see how that is supposed to work, and the ball was pretty much ground like it is now from when i opened the box. the pictures are taken at pretty much the same distance so it should give you an idea of how much smaller the hole is.Both the file and saw on my Wave have similarly "small" depressions compared with the bump OD. The saw is retained closed, my file is now reversed in a knife slot. Can't say I noticed a retention issue NIB. I have a LM opener tool in the other knife slot. I ground a depression of a similar OD to the bump and it closes with quite a satisfying click and the liner lock sits flush with the tool face. Planning on grinding larger depressions all round when some tooling arrives.
I'm baffled whether the small depressions are by design or a QC fail.
-
I was studying my Wave bit changer while considering this post...
</topic/57011
I have added a 3D Phillips to my Wave but retained the bit changer and normally have the #0/#3 bit from the Bit Adapter kit installed.
http://www.leatherman.com/931012.html
I noticed the spring was not engaging the bit with #0 deployed (OK the other way). Then I noticed some weirdness at the #3 end. Can't be intended as not shown on the LM pic. If I'd noticed this on receipt I'd have returned it to Amazon.
-
Just got a new Style CS, the nice little holes in the blade were missing. Not a real problem, but i liked those holes...

-
assuming that this was an one-off and they have not just changed the way they make the blades it may be of interest to collectors.
-
@bounding star said:
Just got a new Style CS, the nice little holes in the blade were missing. Not a real problem, but i liked those holes...

Could you please post a pic that shows the nail nick side of the blade.
Yup, interested to see it too. You tried to link to your dropbox, but as the picture isn't in your public folder we can't see it without your password. ;) Try moving it to the public folder or using Photobucket or attaching the picture to your post in the reply window +Attachments and other options
-
Totally did not notice that when I quoted it.

-
Sorry bout that, does this work?

-
Yes, it does.

Looks like they installed a Squirt blade into yours. The Style blade also has a bit of a bump on the back of the blade and the nail nick is lower.
-
and this one too apparently?
-
Hm, didn't notice the change. Both my Style and Style CS have the one with two small holes. Maybe they decided to only make one blade after they scrapped the Style.
It would be more economical to use the same blade on Squirts, Micras and Style CS than making a separate one for the Style CS only.So it seems you have a new batch blade on your tool, not QC fail.
-
Actually, the Micra's blade is different than the Style/squirts. The Micra's blade is smaller in chord, but very similar. The Style and Squirt blades begin as the same blank, but as noted the nail nicks end up in different places and they punch the two holes.
-
Hm, didn't notice the change. Both my Style and Style CS have the one with two small holes. Maybe they decided to only make one blade after they scrapped the Style.
It would be more economical to use the same blade on Squirts, Micras and Style CS than making a separate one for the Style CS only.So it seems you have a new batch blade on your tool, not QC fail.
Ahh, interesting
-
I think it's a good change, better leverage etc.
-
I just bought the Wave/Croc/Bit Extender pack online from MEC, I haven't looked too closely yet at the Wave itself (it'll be a present for my son) but I'm keeping the Croc for myself to spare my Surge from prying/chiseling type jobs.
It looks like this Croc might have slipped out of place before being stamped.
-
I was watching a doco about Victorinox the other day, and by the looks of it, Vic has just as many slip-ups in manufacturing as other companies such as leatherman, but they employ enough people, with enough skill, that Nothing with any sort of fault ever gets into the market.
Leatherman needs to do the same.
-
@bounding star said:
I was watching a doco about Victorinox the other day, and by the looks of it, Vic has just as many slip-ups in manufacturing as other companies such as leatherman, but they employ enough people, with enough skill, that Nothing with any sort of fault ever gets into the market.Leatherman needs to do the same.
It's near impossible to run a manufacturing process without almost regular amounts of scrap/waste. It's entirely an issue of whether or not a rigid quality control process meets the business objectives. If a certain amount of warranty expenditure proves justifiable in regard to higher margins then the QC is not going to be as stringent, thus lowering the amount of production scrap/waste.
Sent from my iPad using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login