Mini Surge 2.0
-
Looks good. Are you going to polish all tools to match vic scissors and yet to come combo tool?
I just wonder, when someone will built blade exchanger to go inside frame. I would happily lose minidriver and bottleopener tools on behalf of blade exchanger.
Oh yes. Great idea.
Lobby and Breeze get on this. I will give you till this weekend to have t done.
umm Supertool 300 EOD? i thought of the same thing and then i sat the ST300 EOD model.. :D

-
Looks good. Are you going to polish all tools to match vic scissors and yet to come combo tool?
I just wonder, when someone will built blade exchanger to go inside frame. I would happily lose minidriver and bottleopener tools on behalf of blade exchanger.
Oh yes. Great idea.
Lobby and Breeze get on this. I will give you till this weekend to have t done.
umm Supertool 300 EOD? i thought of the same thing and then i sat the ST300 EOD model.. :D

Yes, but it will not fit inside wave/charge frame...
-
Looks good. Are you going to polish all tools to match vic scissors and yet to come combo tool?
I just wonder, when someone will built blade exchanger to go inside frame. I would happily lose minidriver and bottleopener tools on behalf of blade exchanger.
Oh yes. Great idea.
Lobby and Breeze get on this. I will give you till this weekend to have t done.
umm Supertool 300 EOD? i thought of the same thing and then i sat the ST300 EOD model.. :D

Yes, but it will not fit inside wave/charge frame...
but thats why we're here.. to mod stuff!

-
[quote author=Crow link=topic=57640.msg1041267#msg1041267 date=1424159928]
Looks good. Are you going to polish all tools to match vic scissors and yet to come combo tool?I just wonder, when someone will built blade exchanger to go inside frame. I would happily lose minidriver and bottleopener tools on behalf of blade exchanger.
Oh yes. Great idea.
Lobby and Breeze get on this. I will give you till this weekend to have t done.
umm Supertool 300 EOD? i thought of the same thing and then i sat the ST300 EOD model.. :D

Yes, but it will not fit inside wave/charge frame...
but thats why we're here.. to mod stuff!

[/quote]Go on then. :P
-
[quote author=HarleyXJGuy link=topic=57640.msg1041286#msg1041286 date=1424162459]
[quote author=Crow link=topic=57640.msg1041267#msg1041267 date=1424159928]
Looks good. Are you going to polish all tools to match vic scissors and yet to come combo tool?I just wonder, when someone will built blade exchanger to go inside frame. I would happily lose minidriver and bottleopener tools on behalf of blade exchanger.
Oh yes. Great idea.
Lobby and Breeze get on this. I will give you till this weekend to have t done.
umm Supertool 300 EOD? i thought of the same thing and then i sat the ST300 EOD model.. :D

Yes, but it will not fit inside wave/charge frame...
but thats why we're here.. to mod stuff!

[/quote]Go on then. :P
[/quote]Force is strong in this one...
-
Nice modding!
Nate
-
You turned that old rust-bucket into something useful

-
thanks guys! :)
@babola said:
Great result, how does it look folded?Cheers

sorry, no pics of it closed yet... mostly because I haven't done the requisite awl grinding/reshaping yet. :D I'm not totally set on the internal tool loadout; I might change it up a bit. (but I should really grind down the awl anyway... I'm sure it will get used in a mod sooner or later.)
I also want to figure out what is going on with the BE. it's a very snug fit in the handle, even with the cutout, and it's difficult to open. loosening the pivot screw didn't help, and neither did an extra bronze washer.
it's still perfectly usable, just not as smooth as the other tools. ;)Looks good. Are you going to polish all tools to match vic scissors and yet to come combo tool?
I just wonder, when someone will built blade exchanger to go inside frame. I would happily lose minidriver and bottleopener tools on behalf of blade exchanger.
Oh yes. Great idea.
Lobby and Breeze get on this. I will give you till this weekend to have t done.
umm Supertool 300 EOD? i thought of the same thing and then i sat the ST300 EOD model.. :D

Yes, but it will not fit inside wave/charge frame...
I thought of this option as well. the t-shank adapter from a ST300 EOD might fit in there after some reshaping around the pivot area... but it took me a couple months of ebay searching to find a donor Surge at a reasonable price (extra rust included at no extra cost!). if anyone has a spare ST300 EOD that they're willing to sacrifice for this, let me know and I'll be happy to give it a shot. :P
-
Haha, yeah...the ST300 EOD blade exchanger, I've been eying my own one for similar mod but it hurts me to even think what will it do to my existing EOD tool, so will probably leave it alone for now. These are hard to get by in damaged/spare/run off form so as you stated you'll most likely have to buy the whole ST300 tool as a donor.
Thanks for clarifying my question, the reason I asked is that the awl looked in suspiciously original condition to be used for this type of mod so it made me scratch my head a little

-
@babola said:
Haha, yeah...the ST300 EOD blade exchanger, I've been eying my own one for similar mod but it hurts me to even think what will it do to my existing EOD tool, so will probably leave it alone for now. These are hard to get by in damaged/spare/run off form so as you stated you'll most likely have to buy the whole ST300 tool as a donor.Thanks for clarifying my question, the reason I asked is that the awl looked in suspiciously original condition to be used for this type of mod so it made me scratch my head a little

I should have known that one of the other modders would notice that. :D
exactly... buying a new ST300 EOD just for one part that might be usable in a Wave/Charge seems a bit much. used Waves that can be cleaned up and used for mods are easy to come by; even the Charges can be found for a fairly good deal if you're patient. Surges are much harder to come by; even more so for the ST300 EOD. :-\
-
Surges are much harder to come by...
Tell me about it.

there's actually a BO used new version surge now on ebay

-
Surges are much harder to come by...
Tell me about it.

there's actually a BO used new version surge now on ebay

maybe I should have been more specific... Surges are much harder to come by at a decent price... especially if the Surge is just going to be used for mod fodder. :-\
-
Surges are much harder to come by...
Tell me about it.

there's actually a BO used new version surge now on ebay

maybe I should have been more specific... Surges are much harder to come by at a decent price... especially if the Surge is just going to be used for mod fodder. :-\
I would happily pay 50 dollas for that surge but my dad won't let me[emoji38]
50 dollars is not that much..Sent from my iPhone using Tapatalk
-
50 bucks ain't bad at all, if I was not saving for a caper top for my truck I might be all over it.
-
nope, that's not bad at all for a Surge. maybe I should actually look for the ebay listing next time. :D
-
@Breezy12 said:
nope, that's not bad at all for a Surge. maybe I should actually look for the ebay listing next time. :DMeh. The one package that actually got lost while I was here was my OC Pioneer I got off of Ebay.
Of course I can not really say it was the seller since we are in the back woods of Afghanistan. Just glad it was not very expensive.
-
I spent the better part of last night looking at Metros Wave mod with BE. I'm glad I stumbled upon this so I can see how this progresses.
I'm still a bit confused if any grinding of the BE is needed for it to fit or if its just the Surge pivot that's needed or both
. -
@Aloha007 said:
I spent the better part of last night looking at Metros Wave mod with BE. I'm glad I stumbled upon this so I can see how this progresses.I'm still a bit confused if any grinding of the BE is needed for it to fit or if its just the Surge pivot that's needed or both
.if I remember correctly, Metro thinned out his BE because he was originally installing it in a Charge. (He also thinned out the titanium handle scale.)
I have not thinned my BE at all, partly because I'm not going to attempt this with a Charge, and also because it would be extremely difficult to evenly thin the BE using a Dremel, which is what I have to work with. ;) The Surge pivot is definitely needed though.
that being said, I still need to figure something out, because there's a lot of tension/friction on the BE and it's difficult to open. it's still perfectly usable, but I want it to open/close as smoothly as the other tools. :)
-
I spent the better part of last night looking at Metros Wave mod with BE. I'm glad I stumbled upon this so I can see how this progresses.
I'm still a bit confused if any grinding of the BE is needed for it to fit or if its just the Surge pivot that's needed or both
.if I remember correctly, Metro thinned out his BE because he was originally installing it in a Charge. (He also thinned out the titanium handle scale.)
I have not thinned my BE at all, partly because I'm not going to attempt this with a Charge, and also because it would be extremely difficult to evenly thin the BE using a Dremel, which is what I have to work with. ;) The Surge pivot is definitely needed though.
that being said, I still need to figure something out, because there's a lot of tension/friction on the BE and it's difficult to open. it's still perfectly usable, but I want it to open/close as smoothly as the other tools. :)
I'm pretty sure he didn't thin out the BE.
@Metropolicity said:
Blade ExchangerYes! You read right, a blade exchanger (BE). I've always said it couldn't be done, but somehow I did it. Taking the blade exchanger from a Surge, the small part was carefully shaped and the locking surface mated with the smaller liner lock.
This was the easy part. The BE is quite thick and needs room to move and separate to replace the blades. This was a challenge, but thanks to the thick Ti scales, material could be removed to make room for it. A whole 1mm was milled off, and a little lip was left to make sure the scale properly when buttoned up.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login