Replacing Crunch knife with something else?
-
Hi all, this is my first post here. I've been looking at modifying my crunch for a while now and all my searches take me here. I haven't had any luck on my normal forums so I figured I would come to the experts!
Here's the backstory, I have a Wave and a Crunch and wish to remove the blade from the crunch.<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0009_zpsxgfl06te.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0009_zpsxgfl06te.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I want to be able to carry my crunch in places that do not allow blades, but I have communicated with and they say a multitool without a blade would be fine to carry. I have the Wave for other times, and the crunch knife is so tiny I do not feel bad removing it.My plan is to take pictures of everything and then use a candle or heat gun to soften up the lock tite and remove the knurled screw with pliers. I think I'll replace the screws with something easier to deal with after, so I don't care if I kinda bugger them. I am okay with grinding a filing another tool to fit and lock, and don't really care what it is as long as it isn't a blade. I'm thinking a bottle opener, pen, hone, or most likely an awl.
Is there any flaws to this plan? Where do I find special screws and tools. I assume I should gut a pocket knife or something for the awl?
I really appreciate any input, thanks!
-
Shawn first off welcome to the forum. You are in luck with a Crunch you buy wrenches that fit Crunch screws AKA Kick pocket clips. I have two Kicks and two Rebars with Kick pocket clips but I still bought two extra clips for wrenches. The Kick has been retired so no telling how long you will be able to buy them. If you want to make your own tools here are some links to give you ideas on making your own </topic/57328 </topic/4655
-
Keep it simple. Grind the blade down into an awl. Welcome to the forum Shawn.

-
Good idea from the Zman !
Welcome aboard Shawn

-
Welcome bud
Look forward to seeing the mods!
-
You might want to check that the places that don't allow blades will allow an awl, as some see awls as sharp, pokey things that could cause damage to flesh. Some of the awls I have on older MTs could easily kill someone (long, thin and sharp).
-
Thanks guys! I hadn't thought of the awl being a weapon, I might go with a bottle opener or another file. My SAK file is the right thickness and has teeth like a hacksaw on it, I would like that very much.
I guess I should have stated it in the first post, but I would like to keep the knife intact to put back on if I get a different job. Also thanks for the pliers tip, I had seen the clip but not those, I might try that!
I'll keep you updated on my search for tools that fit. I'm trying to find a file from a SAK Camper
-
You might make a V cutter from it. Or replace it with scissors.
-
@Shawn Cimonetti said:
I might go with a bottle opener or another file...
there's already a bottle opener on the Crunch. ;)

Ahhhh, never notice that! I've only had the crunch for a few months and haven't needed that yet.
I really like the scissors idea too, I just need to find where to locate some. I don't have any old multitools that don't get used.
-
@Shawn Cimonetti said:
Ahhhh, never notice that! I've only had the crunch for a few months and haven't needed that yet.You may not have noticed the 1/4" bit driver either (it lives where the adjustment screw goes in). The Crunch is quite a nifty tool (my favourite MT in fact), and when you need locking pliers it really shines.
-
I have been using the hex driver actually<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0027_zpsenuopxyn.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0027_zpsenuopxyn.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> I found that little ball detent extensions work best in them but I have yet to put together an edc driver set. I really like the leatherman branded one though
-
<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/KIMG0629_zpshnvxsxue.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/KIMG0629_zpshnvxsxue.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I figured it out! Just use a sawzall blade and grind it to shape with an angle grinder.<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/KIMG0630_zpsn996pxqr.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/KIMG0630_zpsn996pxqr.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> I will remove all paint and use a gun bluing kit on it. I'll also replace the screws with torx. I see no problems with this, but finding the right washer thickness and shape will be hard. -
Would two sawzall blades equal Crunch blade for thickness?
-
Just about, but the problem that keeps me from putting in 2 is the teeth have set, so the bottom is thicker and 2 would not slide over each other
-
you might be able to find a way if you didn't put them next door to each other, but then you might have issues with them hitting other tools.
I wouldn't use an angle grinder myself, Dremel-type tol or bench grinder would be preferable.
Good luck!
-
It appears a blade with a .05 thickness will fit<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/KIMG0636_zpsn4x6q4yc.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/KIMG0636_zpsn4x6q4yc.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I don't think I want a kerf that thick, it just requires more effort -
@Cupboard said:
you might be able to find a way if you didn't put them next door to each other, but then you might have issues with them hitting other tools.I wouldn't use an angle grinder myself, Dremel-type tol or bench grinder would be preferable.
Good luck!
Thanks! I hadn't thought of that actually, I'll see what will work.
I used an angle grinder with a cutoff wheel to get the very rough shape, then will use my 6x48 belt sander, then a dremel and files for the rest.
-
I ended up using a lenox blade with a .05" thickness <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/KIMG0636_zpsn4x6q4yc.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/KIMG0636_zpsn4x6q4yc.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
And using a heat gun and multiple vise grips and vises on a vise grip multitool I got the knurled barrel screws off. <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0644_zpspswffpzs.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0644_zpspswffpzs.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0645_zps1p0mzv9h.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0645_zps1p0mzv9h.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0647_zps4ipfgzn5.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0647_zps4ipfgzn5.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I was able to slide a screwdriver through and avoid messing up spacers. <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0649_zpspb2bjvn1.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0649_zpspb2bjvn1.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
After positioning it on the blade so that the teeth aligned and the smooth part was on solid, I clamped and traced the shape with a sharp knife. Using a blade to mark a blade on a blade. Notice a pattern haha? I planned on using the 11 amp angle grinder to hack to size then belt sand the rest. My brother had the grinder so I used my dremel with a cutoff wheel and followed the line. <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0652_zpsujx8zqlu.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0652_zpsujx8zqlu.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>another reason why the panavise rocks for small work <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0654_zpshtvjwqdz.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0654_zpshtvjwqdz.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Where I'm currently at after 15 min <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0655_zpskyyeo26w.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0655_zpskyyeo26w.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Looking good so far
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login