And so it begins.... (My adventures into Alox!)
-
This is one of the first mods I was planning long ago. I'm so glad you got this working.
-
Peter's gonna need some steel toed boots just in case he drops it. :ahhh
:D
-
-
That's similar to my MechaRogue ;). Very nice. Love that black/red theme. So you haven't done any with T&T yet?
Sent from my XT901 using Tapatalk
Nope I would have had to make the slots before anodize. If I end up doing home anodize then I can do that better instead of guessing ahead of time. So far Ive only done the tweezer on a Ti91.
Oh and now its been 8, 91mm mods and still only 1 corkscrew.... where is the love of the corkscrew eh! :D
Well I know when next year comes around and my annual Syph job is near, I'll want T&T in my scales. I'd probably want the reverse color scheme of the MechaRogue, red scales with black liners and cross (if you're doing that). Man, I can't wait ;)
Sent from my XT901 using Tapatalk
-
A new review video for anyone who speaks German.
I hope he liked it since I dont speak German. :D
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
@Syph007 said:
A new review video for anyone who speaks German.I hope he liked it since I dont speak German. :D
First, its mostly general information:
- about brass liners
- tang stamp
- presentation of the tools
- blade material, hardness of the tools
About your work:
Unlike other modders your work has the same built quality as a factory model, the blade has no side to side play and the implements have the same snap as the factory model.
He also mentions the price and warns that those modded knifes loose the Victorinox warranty.Finally he does some comparison to the Farmer:
Weight goes up from 85g to 122g, that is quite a jump (is this due to the brass liners?) -
A new review video for anyone who speaks German.
I hope he liked it since I dont speak German. :D
First, its mostly general information:
- about brass liners
- tang stamp
- presentation of the tools
- blade material, hardness of the tools
About your work:
Unlike other modders your work has the same built quality as a factory model, the blade has no side to side play and the implements have the same snap as the factory model.
He also mentions the price and warns that those modded knifes loose the Victorinox warranty.Finally he does some comparison to the Farmer:
Weight goes up from 85g to 122g, that is quite a jump (is this due to the brass liners?)Thanks for the synopsis! :D
Brass does weigh a bit more but that model has an extra backspring and phillips too. I probably should compile a list of models with their weights.
-
A new review video for anyone who speaks German.
I hope he liked it since I dont speak German. :D
First, its mostly general information:
- about brass liners
- tang stamp
- presentation of the tools
- blade material, hardness of the tools
About your work:
Unlike other modders your work has the same built quality as a factory model, the blade has no side to side play and the implements have the same snap as the factory model.
He also mentions the price and warns that those modded knifes loose the Victorinox warranty.Finally he does some comparison to the Farmer:
Weight goes up from 85g to 122g, that is quite a jump (is this due to the brass liners?)Thanks for the synopsis! :D
Brass does weight a bit more but that model has an extra backspring and phillips too. I probably should compile a list of models with their weights.
That would be very interesting

-
Beautiful. Now all it needs is a mini screwdriver (in brass instead of plastic) 8)
That would be cool. I think that would be tricky to do by hand though. :D
I suspect you could make the brass screwed part, and solidly insert the screwdriver blade somehow (maybe a tight press fit would be sufficient, as the torque on the blade is very miniscule). But you'd have more of a problem tuning the fit of the whole screwdriver into the corkscrew.
Brass doesn't have the "give" that plastic offers, the fit would need to be especially precise, and maybe a tight cork or two would ruin the fit again :( :(I don't think a tight fit is necessary. A little play would be fine, it can't fall out anyways. I remember seeing a metal one posted here on MTo some time ago.
I'll ask a friend of mine who just upgraded his 3D printer to a very sophisticated model. Maybe he can print one in a cool material/color.The "tight fit" I was writing about referred to the screwdriver blade fitting into the brass screwed body. That has to be at least resistant to any screwing forces.
I agree, the whole screwdriver could be fairly lose in the corkscrew as it can't go anywhere. -
[quote author=Reinier link=topic=34772.msg1059050#msg1059050 date=1427228821]
Beautiful. Now all it needs is a mini screwdriver (in brass instead of plastic) 8)That would be cool. I think that would be tricky to do by hand though. :D
I suspect you could make the brass screwed part, and solidly insert the screwdriver blade somehow (maybe a tight press fit would be sufficient, as the torque on the blade is very miniscule). But you'd have more of a problem tuning the fit of the whole screwdriver into the corkscrew.
Brass doesn't have the "give" that plastic offers, the fit would need to be especially precise, and maybe a tight cork or two would ruin the fit again :( :(I don't think a tight fit is necessary. A little play would be fine, it can't fall out anyways. I remember seeing a metal one posted here on MTo some time ago.
I'll ask a friend of mine who just upgraded his 3D printer to a very sophisticated model. Maybe he can print one in a cool material/color.The "tight fit" I was writing about referred to the screwdriver blade fitting into the brass screwed body. That has to be at least resistant to any screwing forces.
I agree, the whole screwdriver could be fairly lose in the corkscrew as it can't go anywhere.
[/quote]I bet a tight fit hole could be drilled, then heat the part up to make the metal expand and insert the bit.
Brass expands/contracts with heat so I think that would work.
-
I took a quick video of the troubleshooter before it went off to it's new home in the UK. :D
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Now Im back to 93mm moddin' with a pioneer + phillips today.


-
Oh and next up is the first use of the liner locks finally! :D
It's actually going to be first used for the rescue blade from a 111mm SAK. The blade will need a little tweaking but it looks like it should work fine.
-
@Syph007 said:
Oh and next up is the first use of the liner locks finally! :DIt's actually going to be first used for the rescue blade form a 111mm SAK. The blade will need a little tweaking but it looks like it should work fine.
Any particular reason for the wavy cut? I'm guessing it's stronger, because a straight cut would be easier to make.

-
Oh and next up is the first use of the liner locks finally! :D
It's actually going to be first used for the rescue blade form a 111mm SAK. The blade will need a little tweaking but it looks like it should work fine.
Any particular reason for the wavy cut? I'm guessing it's stronger, because a straight cut would be easier to make.

I presume, its at a clients request


-
Oh and next up is the first use of the liner locks finally! :D
It's actually going to be first used for the rescue blade form a 111mm SAK. The blade will need a little tweaking but it looks like it should work fine.
Any particular reason for the wavy cut? I'm guessing it's stronger, because a straight cut would be easier to make.

In an attempt to not have any stress points. No right angles etc.
-
A new review video for anyone who speaks German.
I hope he liked it since I dont speak German. :D
First, its mostly general information:
- about brass liners
- tang stamp
- presentation of the tools
- blade material, hardness of the tools
About your work:
Unlike other modders your work has the same built quality as a factory model, the blade has no side to side play and the implements have the same snap as the factory model.
He also mentions the price and warns that those modded knifes loose the Victorinox warranty.Finally he does some comparison to the Farmer:
Weight goes up from 85g to 122g, that is quite a jump (is this due to the brass liners?)Thanks for the synopsis! :D
Brass does weigh a bit more but that model has an extra backspring and phillips too. I probably should compile a list of models with their weights.
Yes weight and width would be great. Can't start it till you build my custom now that I am back home.
-
A new review video for anyone who speaks German.
I hope he liked it since I dont speak German. :D
First, its mostly general information:
- about brass liners
- tang stamp
- presentation of the tools
- blade material, hardness of the tools
About your work:
Unlike other modders your work has the same built quality as a factory model, the blade has no side to side play and the implements have the same snap as the factory model.
He also mentions the price and warns that those modded knifes loose the Victorinox warranty.Finally he does some comparison to the Farmer:
Weight goes up from 85g to 122g, that is quite a jump (is this due to the brass liners?)Thanks for the synopsis! :D
Brass does weigh a bit more but that model has an extra backspring and phillips too. I probably should compile a list of models with their weights.
Maybe you could ask owners for a weighted reply ...
My build #102 = 89.8 gms
My build # not in gallery (but URL below) = 73.5 gms
</post/1026847> -
hey guys, I'm actually in the middle of doing a mod and basically I'm trying to figure out the using a chunk or extra brass rivet to fill a 1/8hole so I can drill a 1/16 hole but I keep running into a problem after I've filled the hole, filed the excess brass away and smoothed it over to flush. upon re-drilling the smaller hole, the brass doesn't want to hold up. once it heats up from the drilling it pokes through into the wood I'm using as my base under my component. should I be using more of a solid base so the brass doesn't poke through into a soft material like wood? Or I think I read that brass expands and I should heat the brass after I've filled the hole to make it more secure in it surroundings before I drill my smaller hole in there? Thanks!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
