Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE NOTIFICATIONS 0 MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

And so it begins.... (My adventures into Alox!)

Scheduled Pinned Locked Moved The Mod Squad
6.0k Posts 1 Posters 1.3m Views
  1. Home
  2. Tool Talk
  3. The Mod Squad
  4. And so it begins.... (My adventures into Alox!)
And so it begins.... (My adventures into Alox!)
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • Etherealicer Offline
    Etherealicer
    Admin Team
    Posts: 12,034
    Etherealicer Offline
    Etherealicer
    Admin Team
    wrote on last edited by
    #2496 Quote Reply

      @Syph007 said:

      @Etherealicer said:

      @Syph007 said:

      A new review video for anyone who speaks German.

      I hope he liked it since I dont speak German. :D

      First, its mostly general information:

      • about brass liners
      • tang stamp
      • presentation of the tools
      • blade material, hardness of the tools

      About your work:
      Unlike other modders your work has the same built quality as a factory model, the blade has no side to side play and the implements have the same snap as the factory model.
      He also mentions the price and warns that those modded knifes loose the Victorinox warranty.

      Finally he does some comparison to the Farmer:
      Weight goes up from 85g to 122g, that is quite a jump (is this due to the brass liners?)

      Thanks for the synopsis! :D

      Brass does weight a bit more but that model has an extra backspring and phillips too. I probably should compile a list of models with their weights.

      That would be very interesting :salute:

      1 Reply Last reply
      • neillcurrie Offline
        neillcurrie
        Posts: 860
        neillcurrie Offline
        neillcurrie
        wrote on last edited by
        #2497 Quote Reply

          @Reinier said:

          @neillcurrie said:

          @Syph007 said:

          @Reinier said:

          Beautiful. Now all it needs is a mini screwdriver (in brass instead of plastic) 8)

          That would be cool. I think that would be tricky to do by hand though. :D

          I suspect you could make the brass screwed part, and solidly insert the screwdriver blade somehow (maybe a tight press fit would be sufficient, as the torque on the blade is very miniscule). But you'd have more of a problem tuning the fit of the whole screwdriver into the corkscrew.
          Brass doesn't have the "give" that plastic offers, the fit would need to be especially precise, and maybe a tight cork or two would ruin the fit again :( :(

          I don't think a tight fit is necessary. A little play would be fine, it can't fall out anyways. I remember seeing a metal one posted here on MTo some time ago.
          I'll ask a friend of mine who just upgraded his 3D printer to a very sophisticated model. Maybe he can print one in a cool material/color.

          The "tight fit" I was writing about referred to the screwdriver blade fitting into the brass screwed body. That has to be at least resistant to any screwing forces.
          I agree, the whole screwdriver could be fairly lose in the corkscrew as it can't go anywhere.

          1 Reply Last reply
          • Syph007 Offline
            Syph007
            Global Moderators
            Posts: 9,842
            Syph007 Offline
            Syph007
            Global Moderators
            wrote on last edited by
            #2498 Quote Reply

              @neillcurrie said:

              @Reinier said:

              @neillcurrie said:

              @Syph007 said:

              [quote author=Reinier link=topic=34772.msg1059050#msg1059050 date=1427228821]
              Beautiful. Now all it needs is a mini screwdriver (in brass instead of plastic) 8)

              That would be cool. I think that would be tricky to do by hand though. :D

              I suspect you could make the brass screwed part, and solidly insert the screwdriver blade somehow (maybe a tight press fit would be sufficient, as the torque on the blade is very miniscule). But you'd have more of a problem tuning the fit of the whole screwdriver into the corkscrew.
              Brass doesn't have the "give" that plastic offers, the fit would need to be especially precise, and maybe a tight cork or two would ruin the fit again :( :(

              I don't think a tight fit is necessary. A little play would be fine, it can't fall out anyways. I remember seeing a metal one posted here on MTo some time ago.
              I'll ask a friend of mine who just upgraded his 3D printer to a very sophisticated model. Maybe he can print one in a cool material/color.

              The "tight fit" I was writing about referred to the screwdriver blade fitting into the brass screwed body. That has to be at least resistant to any screwing forces.
              I agree, the whole screwdriver could be fairly lose in the corkscrew as it can't go anywhere.
              [/quote]

              I bet a tight fit hole could be drilled, then heat the part up to make the metal expand and insert the bit.

              Brass expands/contracts with heat so I think that would work.

              1 Reply Last reply
              • Syph007 Offline
                Syph007
                Global Moderators
                Posts: 9,842
                Syph007 Offline
                Syph007
                Global Moderators
                wrote on last edited by
                #2499 Quote Reply

                  I took a quick video of the troubleshooter before it went off to it's new home in the UK. :D

                  - YouTube

                  Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.

                  favicon

                  (www.youtube.com)

                  1 Reply Last reply
                  • Syph007 Offline
                    Syph007
                    Global Moderators
                    Posts: 9,842
                    Syph007 Offline
                    Syph007
                    Global Moderators
                    wrote on last edited by
                    #2500 Quote Reply

                      Now Im back to 93mm moddin' with a pioneer + phillips today. :tu:

                      1 Reply Last reply
                      • Syph007 Offline
                        Syph007
                        Global Moderators
                        Posts: 9,842
                        Syph007 Offline
                        Syph007
                        Global Moderators
                        wrote on last edited by Syph007
                        #2501 Quote Reply

                          Oh and next up is the first use of the liner locks finally! :D

                          It's actually going to be first used for the rescue blade from a 111mm SAK. The blade will need a little tweaking but it looks like it should work fine.

                          IMG_2664.JPG

                          IMG_2658.JPG

                          1 Reply Last reply
                          • pfrsantos Offline
                            pfrsantos
                            Posts: 24,165
                            pfrsantos Offline
                            pfrsantos
                            wrote on last edited by
                            #2502 Quote Reply

                              @Syph007 said:
                              Oh and next up is the first use of the liner locks finally! :D

                              It's actually going to be first used for the rescue blade form a 111mm SAK. The blade will need a little tweaking but it looks like it should work fine.

                              Any particular reason for the wavy cut? I'm guessing it's stronger, because a straight cut would be easier to make.

                              :think: :think:

                              1 Reply Last reply
                              • kosmo Offline
                                kosmo
                                Posts: 1,199
                                kosmo Offline
                                kosmo
                                wrote on last edited by
                                #2503 Quote Reply

                                  @Syph007 said:
                                  Oh and next up is the first use of the liner locks finally! :D

                                  It's actually going to be first used for the rescue blade form a 111mm SAK. The blade will need a little tweaking but it looks like it should work fine.

                                  :popcorn:

                                  1 Reply Last reply
                                  • Etherealicer Offline
                                    Etherealicer
                                    Admin Team
                                    Posts: 12,034
                                    Etherealicer Offline
                                    Etherealicer
                                    Admin Team
                                    wrote on last edited by
                                    #2504 Quote Reply

                                      @pfrsantos said:

                                      @Syph007 said:

                                      Oh and next up is the first use of the liner locks finally! :D

                                      It's actually going to be first used for the rescue blade form a 111mm SAK. The blade will need a little tweaking but it looks like it should work fine.

                                      Any particular reason for the wavy cut? I'm guessing it's stronger, because a straight cut would be easier to make.

                                      :think: :think:

                                      I presume, its at a clients request :whistle:

                                      :woohoo:

                                      1 Reply Last reply
                                      • Syph007 Offline
                                        Syph007
                                        Global Moderators
                                        Posts: 9,842
                                        Syph007 Offline
                                        Syph007
                                        Global Moderators
                                        wrote on last edited by
                                        #2505 Quote Reply

                                          @pfrsantos said:

                                          @Syph007 said:

                                          Oh and next up is the first use of the liner locks finally! :D

                                          It's actually going to be first used for the rescue blade form a 111mm SAK. The blade will need a little tweaking but it looks like it should work fine.

                                          Any particular reason for the wavy cut? I'm guessing it's stronger, because a straight cut would be easier to make.

                                          :think: :think:

                                          In an attempt to not have any stress points. No right angles etc.

                                          1 Reply Last reply
                                          • HarleyXJGuy Offline
                                            HarleyXJGuy
                                            Posts: 8,856
                                            HarleyXJGuy Offline
                                            HarleyXJGuy
                                            wrote on last edited by
                                            #2506 Quote Reply

                                              @Syph007 said:

                                              @Etherealicer said:

                                              @Syph007 said:

                                              A new review video for anyone who speaks German.

                                              I hope he liked it since I dont speak German. :D

                                              First, its mostly general information:

                                              • about brass liners
                                              • tang stamp
                                              • presentation of the tools
                                              • blade material, hardness of the tools

                                              About your work:
                                              Unlike other modders your work has the same built quality as a factory model, the blade has no side to side play and the implements have the same snap as the factory model.
                                              He also mentions the price and warns that those modded knifes loose the Victorinox warranty.

                                              Finally he does some comparison to the Farmer:
                                              Weight goes up from 85g to 122g, that is quite a jump (is this due to the brass liners?)

                                              Thanks for the synopsis! :D

                                              Brass does weigh a bit more but that model has an extra backspring and phillips too. I probably should compile a list of models with their weights.

                                              Yes weight and width would be great. Can't start it till you build my custom now that I am back home.

                                              1 Reply Last reply
                                              • Heywood Floyd Offline
                                                Heywood Floyd
                                                Posts: 437
                                                Heywood Floyd Offline
                                                Heywood Floyd
                                                wrote on last edited by
                                                #2507 Quote Reply

                                                  @Syph007 said:

                                                  @Etherealicer said:

                                                  @Syph007 said:

                                                  A new review video for anyone who speaks German.

                                                  I hope he liked it since I dont speak German. :D

                                                  First, its mostly general information:

                                                  • about brass liners
                                                  • tang stamp
                                                  • presentation of the tools
                                                  • blade material, hardness of the tools

                                                  About your work:
                                                  Unlike other modders your work has the same built quality as a factory model, the blade has no side to side play and the implements have the same snap as the factory model.
                                                  He also mentions the price and warns that those modded knifes loose the Victorinox warranty.

                                                  Finally he does some comparison to the Farmer:
                                                  Weight goes up from 85g to 122g, that is quite a jump (is this due to the brass liners?)

                                                  Thanks for the synopsis! :D

                                                  Brass does weigh a bit more but that model has an extra backspring and phillips too. I probably should compile a list of models with their weights.

                                                  Maybe you could ask owners for a weighted reply ...
                                                  My build #102 = 89.8 gms
                                                  My build # not in gallery (but URL below) = 73.5 gms
                                                  </post/1026847>

                                                  1 Reply Last reply
                                                  • mudtracks Offline
                                                    mudtracks
                                                    Posts: 5
                                                    mudtracks Offline
                                                    mudtracks
                                                    wrote on last edited by
                                                    #2508 Quote Reply

                                                      hey guys, I'm actually in the middle of doing a mod and basically I'm trying to figure out the using a chunk or extra brass rivet to fill a 1/8hole so I can drill a 1/16 hole but I keep running into a problem after I've filled the hole, filed the excess brass away and smoothed it over to flush. upon re-drilling the smaller hole, the brass doesn't want to hold up. once it heats up from the drilling it pokes through into the wood I'm using as my base under my component. should I be using more of a solid base so the brass doesn't poke through into a soft material like wood? Or I think I read that brass expands and I should heat the brass after I've filled the hole to make it more secure in it surroundings before I drill my smaller hole in there? Thanks!

                                                      1 Reply Last reply
                                                      • Syph007 Offline
                                                        Syph007
                                                        Global Moderators
                                                        Posts: 9,842
                                                        Syph007 Offline
                                                        Syph007
                                                        Global Moderators
                                                        wrote on last edited by
                                                        #2509 Quote Reply

                                                          @mudtracks said:
                                                          hey guys, I'm actually in the middle of doing a mod and basically I'm trying to figure out the using a chunk or extra brass rivet to fill a 1/8hole so I can drill a 1/16 hole but I keep running into a problem after I've filled the hole, filed the excess brass away and smoothed it over to flush. upon re-drilling the smaller hole, the brass doesn't want to hold up. once it heats up from the drilling it pokes through into the wood I'm using as my base under my component. should I be using more of a solid base so the brass doesn't poke through into a soft material like wood? Or I think I read that brass expands and I should heat the brass after I've filled the hole to make it more secure in it surroundings before I drill my smaller hole in there? Thanks!

                                                          Are you peening the brass before you file it? You really need to peen it well on both sides to get it to expand firmly against the walls of the hole you're filling, then remove excess from both sides. :tu:

                                                          1 Reply Last reply
                                                          • mudtracks Offline
                                                            mudtracks
                                                            Posts: 5
                                                            mudtracks Offline
                                                            mudtracks
                                                            wrote on last edited by
                                                            #2510 Quote Reply

                                                              [/quote]

                                                              Are you peening the brass before you file it? You really need to peen it well on both sides to get it to expand firmly against the walls of the hole you're filling, then remove excess from both sides. :tu:
                                                              [/quote]

                                                              Actually no, I wasn't peening it at all. Which explains why it was poking through. The brass really has nothing to grab ahold of. I'll give it another shot! Thanks for pointing me in the right direction

                                                              1 Reply Last reply
                                                              • Syph007 Offline
                                                                Syph007
                                                                Global Moderators
                                                                Posts: 9,842
                                                                Syph007 Offline
                                                                Syph007
                                                                Global Moderators
                                                                wrote on last edited by
                                                                #2511 Quote Reply

                                                                  @mudtracks said:
                                                                  Actually no, I wasn't peening it at all. Which explains why it was poking through. The brass really has nothing to grab ahold of. I'll give it another shot! Thanks for pointing me in the right direction

                                                                  I suppose I should have just said hammering as you dont actually want to peen heads on the brass but rather force it to expand in the middle, so just hit it with the flat of a hammer, then file off the excess after it's locked in good and solid. :tu:

                                                                  1 Reply Last reply
                                                                  • Syph007 Offline
                                                                    Syph007
                                                                    Global Moderators
                                                                    Posts: 9,842
                                                                    Syph007 Offline
                                                                    Syph007
                                                                    Global Moderators
                                                                    wrote on last edited by Syph007
                                                                    #2512 Quote Reply

                                                                      @Syph007 said:

                                                                      @TazzieRob said:

                                                                      If you have 3D CAD drawings of the parts you should be able to get pretty accurate surface area values. Good luck with it, I'm interested to see what results you obtain :cheers:

                                                                      I did some reading on anodize theory, its really facinating. The alum oxide grows perpendicular from the surface like little hairs from the surface. The spacing of those 'hairs' its what determines the hardness (not layer thickness as I had thought). Now.. the higher the current density the smaller the pore size (space between the hairs) and the harder it is to dye which is why hard anodize has less dye options as only some dyes are small enough to fit in the smaller pores!

                                                                      Similarly if the current density is too low, the 'hairs' are too far apart and the dye wont be trapped, and color will leak back out even if sealed.

                                                                      So! This is right up my alley for careful controlled experimentation and taking notes it will be like being back in the lab, but making cool parts too...

                                                                      And now that I found blue masking lacquer, I can mask off the shields and then dye the scales any color! :D :D :D

                                                                      Welcome to Syph's Science series! :D

                                                                      After more reading I got the facts on doing hard anodize. In short the differences from standard anodize in terms of process are

                                                                      • Current density increased to 18-24 amps/sqft
                                                                      • surfuric acid bath concentration 2:1 (2 parts water + 1 part battery acid)
                                                                      • Keep electrolyte bath at a constant 37-40F
                                                                      • Aggressive agitation of bath to disperse heat

                                                                      The difficulty factor is maintaining the bath temp. If it strays from the 37-40 range the cell (they are called cells aparently not 'hairs') density will decrease and they will facture and apear as white blemishes on the surface. Since there is much higher current being dumped in the bath, it heats up faster so some sort of better cooling is required.

                                                                      So it is quite possible to hard anodize at home if you have the right setup. Its completely possible to hard anodize a set of scales as the surface area and needed amperage are low. I would just need to be able to tweak bath temperature, but it might be possible with frozen water bottlers or similar...

                                                                      But as there are limited color dyes to use with hard anodize a compromise anodize of Type II with a thicker layer of 0.002" can be made (standard is 0.001") and still dyed any color which sounds like the way to go for doing the OD green and orange I want! :D :D :D

                                                                      Here is a pic I found of what the alox growth looks like close up.

                                                                      And a cell - pore schematic

                                                                      1 Reply Last reply
                                                                      • tommywp Offline
                                                                        tommywp
                                                                        Posts: 506
                                                                        tommywp Offline
                                                                        tommywp
                                                                        wrote on last edited by
                                                                        #2513 Quote Reply

                                                                          I'm thinking a knife less 91mmm would be cool with saw, metal file and scissors. Is there any flexibility in the backtools for these 3 layers? I think I remeber reading that you're stuck with the hook, but could the fine screwdriver and awl fit? Is there a way to cover the corkscrew cut out using either the stock scales or the sweet new ones?

                                                                          1 Reply Last reply
                                                                          • HarleyXJGuy Offline
                                                                            HarleyXJGuy
                                                                            Posts: 8,856
                                                                            HarleyXJGuy Offline
                                                                            HarleyXJGuy
                                                                            wrote on last edited by
                                                                            #2514 Quote Reply

                                                                              @tommywp said:
                                                                              I'm thinking a knife less 91mmm would be cool with saw, metal file and scissors. Is there any flexibility in the backtools for these 3 layers? I think I remeber reading that you're stuck with the hook, but could the fine screwdriver and awl fit? Is there a way to cover the corkscrew cut out using either the stock scales or the sweet new ones?

                                                                              Or some kind of back tool spring combo that has no space for the CS? Of course a scale that did not have the cut out also.

                                                                              Hmm I think I just described every Alox ever made. :facepalm:

                                                                              1 Reply Last reply
                                                                              • tattoosteve99 Offline
                                                                                tattoosteve99
                                                                                Posts: 6,326
                                                                                tattoosteve99 Offline
                                                                                tattoosteve99
                                                                                wrote on last edited by
                                                                                #2515 Quote Reply

                                                                                  @tattoosteve99 said:
                                                                                  Do you think the toothpick will work same as the tweezers did?

                                                                                  ??? :wave: ??

                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  • 124
                                                                                  • 125
                                                                                  • 126
                                                                                  • 127
                                                                                  • 128
                                                                                  • 301
                                                                                  • 302
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. The Mod Squad
                                                                                  4. And so it begins.... (My adventures into Alox!)
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0