PowerPlier
-
Nope, they're just for looks. I can't imagine they make any noticable difference in the weight of the tool.
-
I never have fully understood SOG's number designation system. The earlier tool, with the flat-nose pliers, was a PowerPlier F65. The later series of this tool, with needlenose pliers, is a PowerPlier S65.
Other differences: The later S65 had a polished finish and came equipped with fewer blades and drivers.

-
@Corrugated said:
Those plier heads definatley look...odd. I'm glad they were changed for the PowerLock.And what do lightning holes do (if anything)? Make the handles flip open and closed faster?
They don't protect you from lightning. They are there for "lightening" the tool.
-
@Corrugated said:
Those plier heads definatley look...odd. I'm glad they were changed for the PowerLock.And what do lightning holes do (if anything)? Make the handles flip open and closed faster?
"The comfort grip handles are smooth on the outside and feature SOG’s classic ventilation holes for maximum gripping." http://sogknives.com/store/S31.html
The quote refers to the Paratool but I suppose it also applies to the ventilation holes on their other tools as well.
Very nice review!
-
Thanks supratentorial!
@supratentorial said:
"The comfort grip handles are smooth on the outside and feature SOG’s classic ventilation holes for maximum gripping." http://sogknives.com/store/S31.htmlIt must be the "maximum gripping" that SOG is referring to only applies when using the knife and drivers..........because when using the pliers, those "classic ventilation holes" are on the wrong side of the handles! :)
-
I've always found this tool interesting.
Those big honkin' "flat" plier jaws aren't very good for detail work, granted; but for coarser work, they're damn tough. You sure won't be breaking off the tips of those!
Personally, I wish SOG released their current tools in the stone-washed or tumbled finish of that original PowerPlier. It isn't as pretty when new, but if you actually use the tool, it feels more secure in the hand (less slick than the current mirror finish), and it hides the dents and scuffs and dings pretty well.
BTW, for those keeping score at home, the old-skool PowerPlier featured these unique implements:
-
Small Knife Blade (sadly, not very useful with those big fat handles)
-
Chisel (looks like a large flat-blade screwdriver in the photos above)
-
Robertson (square) screwdriver -- weird since AFAIK Robertson fasteners are only common in Canada.
Other implement differences from current SOG tools, but seen on some older SOGs in my collection:
-
Combination can opener / cap lifter. Current tools have two separate implements, with flat screwdrivers on the ends, as seen on Victorinox Swiss Army knives.
-
Separate large, medium and eyeglass-sized flat screwdrivers.
My only complaint about the old PowerPlier is that they don't "flip" easily: mine, as well as the other two I've had a chance to handle, have very stiff pivots.
-
-
Robertsons are very common in Canada, but you are right, I don't think that you see them many other places. Which is too bad, because they are a very useful design and hard to strip.
Def
-
@Defender said:
Robertsons are very common in Canada, but you are right, I don't think that you see them many other places. Which is too bad, because they are a very useful design and hard to strip.Def
Robertsons are a better design. Slotted and Phillips are more common in the US because they are cheaper to manufacture.
But Robertsons are popular among woodworkers. The Kreg Pocket Hole system uses Robertsons. For furniture, I usually just use conventional wood joints but I'll buy one of those systems if they ever go on clearance.
I think the Robertson driver is a good addition to the PowerPlier but of course its usefulness will totally depend on what types of fasteners you use.
-
I agree completely- it doesn't really matter what kind of screwdriver is better when you don't have a screw to fit it!
I do know a gentleman (one of those silly Canadians) who swears by SOG specifically because they are the only manufacturer to include a Robertson either standard or as an option, so it obviously is important to some folks. I actually prefer (maybe you've noticed? :P ) models that take standard bits so I can carry whatever bits I think I might want or need. To me, that's a heck of alot easier than searcing out a multi or modding one that has all the exact implements I need.
Especially nowadays with Torx bits and some of the other proprietary screw types out there, this seems to make alot of sense to me. Having a Robertson is nice (for us Canuckleheads) but it's meaningless if one is looking at a T15 screw.
Def
-
Y'know where I see Robertson screws almost exclusively? On motorhomes and campers and other RV's. My semi-retired father works part time as a maintenance guy at a campground (he gets a free lot on the water, the lucky bum). For whatever reason, it seems that these camping trailers and such are all put together with Robertson-drive fasteners.
-
Hi Def,
Take a look at the Leatherman Tool Adaptor - It has both #1 & #2 Robertson bits.
Cheers - Joe
-
Robertsons are very common in Canada, but you are right, I don't think that you see them many other places. Which is too bad, because they are a very useful design and hard to strip.
I'm using them a bit, once you get over the fact that it's just a square, they're actually kinda nifty. Plus they look nice and neat when you're done.
Are the Drivers much good on SOGs? maybe I should be chasing a Powerlock instead of a Supertool for my Heavy Duty user? (since, apparently, Supertool drivers are similar to the smurf ones on my PST)
-
@Nomad said:
Are the Drivers much good on SOGs? maybe I should be chasing a Powerlock instead of a Supertool for my Heavy Duty user? (since, apparently, Supertool drivers are similar to the smurf ones on my PST)If it is any help, I traded away my Powerlock and then replaced it with a Supertool which, IMO, is better.
I was put off of the Powerlock because of a number of reasons. I didn't like the exposed gears (now not an issue in the second one) as they really cut into my hands. I didn't like the covers (I know these could have been removed) as they made tool selection very slow. I didn't like the look of the scissors so ordered the V-cutter which I never really had a use for. There was a spacer where a tool could have been which I just didn't like the idea of (they could have put a robertson or something in there). When butterfly opening the handles would bang the back of your knuckles if you weren't too carefull, although I suppose with some adjustment this could have been rectified.
All of the above problems are not found in the Supertool and that's why I prefer it. I am sure many will disagree though! :D
-
@Defender said:
Robertsons are very common in Canada, but you are right, I don't think that you see them many other places. Which is too bad, because they are a very useful design and hard to strip.Def
I worked the trade shows all over usa and many times I needed Robertson bits, Canada makes a system of show booth/display that is very popular and of course uses the Robertson bit. So maybe they targeted people then (90's) who didn't always have those types of bits handy.
-
There's a story about a Canadian artist who was having a show in Paris and hired a company to ship his artwork there for him. Just before he left he got a panicked call from the gallery saying they had no way of opening the crates because they were held together with some funny square headed screws. They had contacted every hardware store within 150 miles of Paris and no one had even heard of such a thing!
Def
-
lol I've opened those crates! I think I still have some screws left. We used a pry bar, real quick :D
-
Not a good idea when you need those crates to re-pack later!
Def
-
for some unexplained reason, no one had Robertson bits (not even the boss), and the exhibitor said bust it! so we did, and we were real careful (cough) and managed to re-pack everything after the show, like good little carpenters :P
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login