PowerPlier
-
I agree completely- it doesn't really matter what kind of screwdriver is better when you don't have a screw to fit it!
I do know a gentleman (one of those silly Canadians) who swears by SOG specifically because they are the only manufacturer to include a Robertson either standard or as an option, so it obviously is important to some folks. I actually prefer (maybe you've noticed? :P ) models that take standard bits so I can carry whatever bits I think I might want or need. To me, that's a heck of alot easier than searcing out a multi or modding one that has all the exact implements I need.
Especially nowadays with Torx bits and some of the other proprietary screw types out there, this seems to make alot of sense to me. Having a Robertson is nice (for us Canuckleheads) but it's meaningless if one is looking at a T15 screw.
Def
-
Y'know where I see Robertson screws almost exclusively? On motorhomes and campers and other RV's. My semi-retired father works part time as a maintenance guy at a campground (he gets a free lot on the water, the lucky bum). For whatever reason, it seems that these camping trailers and such are all put together with Robertson-drive fasteners.
-
Hi Def,
Take a look at the Leatherman Tool Adaptor - It has both #1 & #2 Robertson bits.
Cheers - Joe
-
Robertsons are very common in Canada, but you are right, I don't think that you see them many other places. Which is too bad, because they are a very useful design and hard to strip.
I'm using them a bit, once you get over the fact that it's just a square, they're actually kinda nifty. Plus they look nice and neat when you're done.
Are the Drivers much good on SOGs? maybe I should be chasing a Powerlock instead of a Supertool for my Heavy Duty user? (since, apparently, Supertool drivers are similar to the smurf ones on my PST)
-
@Nomad said:
Are the Drivers much good on SOGs? maybe I should be chasing a Powerlock instead of a Supertool for my Heavy Duty user? (since, apparently, Supertool drivers are similar to the smurf ones on my PST)If it is any help, I traded away my Powerlock and then replaced it with a Supertool which, IMO, is better.
I was put off of the Powerlock because of a number of reasons. I didn't like the exposed gears (now not an issue in the second one) as they really cut into my hands. I didn't like the covers (I know these could have been removed) as they made tool selection very slow. I didn't like the look of the scissors so ordered the V-cutter which I never really had a use for. There was a spacer where a tool could have been which I just didn't like the idea of (they could have put a robertson or something in there). When butterfly opening the handles would bang the back of your knuckles if you weren't too carefull, although I suppose with some adjustment this could have been rectified.
All of the above problems are not found in the Supertool and that's why I prefer it. I am sure many will disagree though! :D
-
@Defender said:
Robertsons are very common in Canada, but you are right, I don't think that you see them many other places. Which is too bad, because they are a very useful design and hard to strip.Def
I worked the trade shows all over usa and many times I needed Robertson bits, Canada makes a system of show booth/display that is very popular and of course uses the Robertson bit. So maybe they targeted people then (90's) who didn't always have those types of bits handy.
-
There's a story about a Canadian artist who was having a show in Paris and hired a company to ship his artwork there for him. Just before he left he got a panicked call from the gallery saying they had no way of opening the crates because they were held together with some funny square headed screws. They had contacted every hardware store within 150 miles of Paris and no one had even heard of such a thing!
Def
-
lol I've opened those crates! I think I still have some screws left. We used a pry bar, real quick :D
-
Not a good idea when you need those crates to re-pack later!
Def
-
for some unexplained reason, no one had Robertson bits (not even the boss), and the exhibitor said bust it! so we did, and we were real careful (cough) and managed to re-pack everything after the show, like good little carpenters :P
-
Are the Drivers much good on SOGs? maybe I should be chasing a Powerlock instead of a Supertool for my Heavy Duty user? (since, apparently, Supertool drivers are similar to the smurf ones on my PST)
If it is any help, I traded away my Powerlock and then replaced it with a Supertool which, IMO, is better.
I was put off of the Powerlock because of a number of reasons. I didn't like the exposed gears (now not an issue in the second one) as they really cut into my hands. I didn't like the covers (I know these could have been removed) as they made tool selection very slow. I didn't like the look of the scissors so ordered the V-cutter which I never really had a use for. There was a spacer where a tool could have been which I just didn't like the idea of (they could have put a robertson or something in there). When butterfly opening the handles would bang the back of your knuckles if you weren't too carefull, although I suppose with some adjustment this could have been rectified.
All of the above problems are not found in the Supertool and that's why I prefer it. I am sure many will disagree though! :D
I disagree Benner!.... :D Well to a certain extent as I haven't actually had a go with a Supertool before but they are now too old and aren't as strong and tough as the Powerlock ;)
I honestly do like the Powerlock as nobody comes close to matching its power. OK the flaps do get a bit annoying which is why I dont have them on. The only thing that I dont like is the clumping of the tools, but once you loosen it a bit its not too bad.
-
they are now too old and aren't as strong and tough as the Powerlock
I own both and I wouldn't say that. The Powerlock is a more modern design with better ergonomics and better pliers but as far as pure toughness I can't rate it ahead of the Supertool.
-
I am glad you disagree Cryptrick! :D
they are now too old and aren't as strong and tough as the Powerlock
I own both and I wouldn't say that. The Powerlock is a more modern design with better ergonomics and better pliers but as far as pure toughness I can't rate it ahead of the Supertool.
DTH is right. I feel that due to the Supertools lack or ergonomics and any other luxuries, that this makes the Supertool just as tough, if not tougher, than the Powerlock.
It's not called the Supertool for nothing! :D
-
It's not called the Supertool for nothing! :D
It was a SuperTool.... in the early 90's :P ;)
Yeah, back when things were made properly. :P :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login