firearms
-
I like to shoot I get out as much as I can at the range or my Nephews ranch. Twenty years a go I started hand loading my own ammo and have never looked back. Most factory ammo is loaded for speed. It doesn't take long before you are shooting much smaller groups with ammo you tuned to shoot in your gun. Here in the US we had a ammo shortage a few years back reloading supply's were also hard to come by. I have been casting my own round balls for my black powder guns. So I started collecting molds for my rifles and hand guns. Now all I pretty much shoot is cast bullets. You can load all most any rifle with a few grains of fast pistol powder and the cost is about 7 cents a round. They shoot very quite and have no recoil in fact my AK 47 sounds suppressed. Here is a pic one of my hand gun kits it's about everything you need to load a 357/38SP. I have kits like for 45ACP, 45 Colt, M95 Nagant Gas seal ammo, 54R and X39.

Sent from my iPad using Tapatalk
-
@Mike 56 said:
I like to shoot I get out as much as I can at the range or my Nephews ranch. Twenty years a go I started hand loading my own ammo and have never looked back. Most factory ammo is loaded for speed. It doesn't take long before you are shooting much smaller groups with ammo you tuned to shoot in your gun. Here in the US we had a ammo shortage a few years back reloading supply's were also hard to come by. I have been casting my own round balls for my black powder guns. So I started collecting molds for my rifles and hand guns. Now all I pretty much shoot is cast bullets. You can load all most any rifle with a few grains of fast pistol powder and the cost is about 7 cents a round. They shoot very quite and have no recoil in fact my AK 47 sounds suppressed. Here is a pic one of my hand gun kits it's about everything you need to load a 357/38SP. I have kits like for 45ACP, 45 Colt, M95 Nagant Gas seal ammo, 54R and X39.
Sent from my iPad using Tapatalk
A 4" GP100? I like that model.

-
I like to shoot I get out as much as I can at the range or my Nephews ranch. Twenty years a go I started hand loading my own ammo and have never looked back. Most factory ammo is loaded for speed. It doesn't take long before you are shooting much smaller groups with ammo you tuned to shoot in your gun. Here in the US we had a ammo shortage a few years back reloading supply's were also hard to come by. I have been casting my own round balls for my black powder guns. So I started collecting molds for my rifles and hand guns. Now all I pretty much shoot is cast bullets. You can load all most any rifle with a few grains of fast pistol powder and the cost is about 7 cents a round. They shoot very quite and have no recoil in fact my AK 47 sounds suppressed. Here is a pic one of my hand gun kits it's about everything you need to load a 357/38SP. I have kits like for 45ACP, 45 Colt, M95 Nagant Gas seal ammo, 54R and X39.

Sent from my iPad using Tapatalk
A 4" GP100? I like that model.

That's my problem, reloads got so cheap that I literally had half of one of the garages filled with ammo. Ridiculous....
Sent from my iPhone using Tapatalk
-
I think down the road, I may get on-board with re-loading.
Every Wednesday, the club has a feast for 15 dollars. It is a way to socialize and make some money for the club. Well tonight, I had Italian sausages, deer venison steaks, salad, and the best blueberry cheese Pie with a heaping side of marble ice cream.

Best part, I now have everything I need to transport my restricted handguns to the range.

I am also signed and paid up for the Black Badge course next month. Looks like I have everything i need to get going....finally.
-
Congrats!!!!!

-
Lovely.
9mm Largo? We had a Destroyer carbine for a long time, basically a miniturized M93 Mauser chambered for 9mm Largo (or Bergmann-Bayard, if you want the correct name for the round ;) ). They were used for many years by Spanish police. Neat little rifle. -
@Chako said:
I think down the road, I may get on-board with re-loading.Every Wednesday, the club has a feast for 15 dollars. It is a way to socialize and make some money for the club. Well tonight, I had Italian sausages, deer venison steaks, salad, and the best blueberry cheese Pie with a heaping side of marble ice cream.

Best part, I now have everything I need to transport my restricted handguns to the range.

I am also signed and paid up for the Black Badge course next month. Looks like I have everything i need to get going....finally.
Excellent news bud!

-
@Mike 56 said:
I like to shoot I get out as much as I can at the range or my Nephews ranch. Twenty years a go I started hand loading my own ammo and have never looked back. Most factory ammo is loaded for speed. It doesn't take long before you are shooting much smaller groups with ammo you tuned to shoot in your gun. Here in the US we had a ammo shortage a few years back reloading supply's were also hard to come by. I have been casting my own round balls for my black powder guns. So I started collecting molds for my rifles and hand guns. Now all I pretty much shoot is cast bullets. You can load all most any rifle with a few grains of fast pistol powder and the cost is about 7 cents a round. They shoot very quite and have no recoil in fact my AK 47 sounds suppressed. Here is a pic one of my hand gun kits it's about everything you need to load a 357/38SP. I have kits like for 45ACP, 45 Colt, M95 Nagant Gas seal ammo, 54R and X39.
Sent from my iPad using Tapatalk
I so very much want to get started reloading.
-
@SAK Guy said:
Good stuff!!!! What kind of grip is on that Smith and do you like it?Its a Hogue Bantam and I prefer the simple Uncle Mikes boot grip over it. I have the boot grip on one of my EDC guns, an old Model 38 Airweight.
The Model 042 came from the factory with the oversize Uncle Mikes "combat" grips.

-
@jerseydevil said:
Lovely.
9mm Largo? We had a Destroyer carbine for a long time, basically a miniturized M93 Mauser chambered for 9mm Largo (or Bergmann-Bayard, if you want the correct name for the round ;) ). They were used for many years by Spanish police. Neat little rifle.9mm Para.
I really think they were designed for the Largo and adapted for 9mmP, hence the reliability issues.
Star Model BS , the S= magazine safety.
I have mine shooting ball quite reliably but some of the ones I shot in the army could not get a full magazine off without jamming. Magazines had to be perfect etc. -
Good stuff!!!! What kind of grip is on that Smith and do you like it?
Its a Hogue Bantam and I prefer the simple Uncle Mikes boot grip over it. I have the boot grip on one of my EDC guns, an old Model 38 Airweight.
The Model 042 came from the factory with the oversize Uncle Mikes "combat" grips.I see a pattern here.
Ruger LCR 357 Magnum with 3" Hogue grip.

-
Good stuff!!!! What kind of grip is on that Smith and do you like it?
Its a Hogue Bantam and I prefer the simple Uncle Mikes boot grip over it. I have the boot grip on one of my EDC guns, an old Model 38 Airweight.
The Model 042 came from the factory with the oversize Uncle Mikes "combat" grips.

Thank you!! Arthritis has settled into my middle finger, middle joint and my J frame service grips hurt to hold tight. I'm looking for a new grip or a Tyler T-Grip to fix it.
-
Not that big fan of handguns - I like long guns better. Rifles and shotguns are mine. I like the beautiful wooden stocks and a good blued steel barrel.
I prefer the old ones like lever action guns, double barrel shotguns or bolt actiohttp://forum.multitool.org/Smileys/default/cheers.gifn rifles. Not that fan of semiautos like AR-15
My Rossi M92 octagon barrel in .357Mag with my grail knife (Queen DB Barlow)
I´m almost saving my bucks for a Swedish Mauser or a K98 or a Lee Enfield or a....
-
Great photo mate. :)
-
Beautiful gear Andi!!!
-
My infantry squad in reenactment battle.

-
Awesome picture.
-
@Humppa said:
Not that big fan of handguns - I like long guns better. Rifles and shotguns are mine. I like the beautiful wooden stocks and a good blued steel barrel.
I prefer the old ones like lever action guns, double barrel shotguns or bolt actiohttp://forum.multitool.org/Smileys/default/cheers.gifn rifles. Not that fan of semiautos like AR-15
My Rossi M92 octagon barrel in .357Mag with my grail knife (Queen DB Barlow)
I´m almost saving my bucks for a Swedish Mauser or a K98 or a Lee Enfield or a....
Very nice setup.....
Sent from my iPhone using Tapatalk
-
@Humppa said:
Not that big fan of handguns - I like long guns better. Rifles and shotguns are mine. I like the beautiful wooden stocks and a good blued steel barrel.
I prefer the old ones like lever action guns, double barrel shotguns or bolt actiohttp://forum.multitool.org/Smileys/default/cheers.gifn rifles. Not that fan of semiautos like AR-15
My Rossi M92 octagon barrel in .357Mag with my grail knife (Queen DB Barlow)
I´m almost saving my bucks for a Swedish Mauser or a K98 or a Lee Enfield or a....
:D Honestly I couldn't agree more. I say get a Lee-Enfield first, a nice SMLE No. 1 Mk III. With a bit of practice you can empty one in under 10 seconds. Look up "Lee Enfield Mad Minute" on Youtube.
-
I just got back from the range...and yes, I am hooked on handguns. This being the first time I was able to take them to the range and use them.
Having shot my friends. .40 caliber Glock, I am very happy I bought the 9 mm. I found the recoil to be far less. With that said, I shot around 100 rounds of 9 mm. The first 50, I was always shooting low. With the help of my friend, I figured out what I was doing wrong, and most of that was with the trigger. Once I figured out I was supposed to take up the slack and then shoot, my aiming became a lot better. Nothing great yet, but there was a big improvement. He shot the M&P and he quickly told me my trigger action was one of the nicest he has tried on the M&P. I Couldn't tell, as I was hung up on the various stages of the trigger for a while today...but I will take his word for it.
I also packed along my two .22 LR handguns. The Cimmeron Plinkerton...well what can I say other than I liked it a lot. I loved the simplicity of having a single action revolver. This gun was very accurate. The simplistic trigger and low recoil improved my grouping and aim considerably compared to the 9 mm M&P. It also feels great in the hand, being of all metal construction. If anyone is looking for a cheap single action Army style revolver, you can't go far wrong with the Cimmeron in .22 LR. I think they call this a gateway gun.
Along with the Plinkerton, I was also able to shoot my Browning Buck Mark Hunter. Both my .22 LR handguns feel a lot more substantial and solid compared to my half polymer M&P. The Buck Mark is another dream to shoot pistol. I wasn't sure if I liked the simplicity and feel of the Plinkerton or the semi-automatic Buck Mark more. I figured I enjoyed them equally. I can see a long day at the range with either one and a box or two of .22 LR ammunition. I think that would be a great way to relax and enjoy oneself.
Along with my M&P, I also brought alone the Hi-Point 995TS. What surprised me about this carbine, was how much more velocity the longer barrel gave the rounds above those of the handgun. It was very noticeable. I have no regrets buying the Hi-Point, even after finding out I will be restricted to only 5 rounds in Canada. The price is right, and shooting it was a lot of fun. I only sent about 15 rounds downrange...as I wanted to focus my time on the M&P, as the Black Badge course is coming quick on the first weekend of May.
Here are a few down range shots in the particular shooting lane we were using.
Here is a shot towards the club house from the shooting lane we were using.
And here we are set up at the shooting range hut.
My club has 4 to 5 different shooting lanes, each with a hut. We have one longer range for rifles and 3 to 4 smaller lanes like the one pictured above. One of the lanes has a 90 degree dog leg at the end that allows them to build portable walls and stuff for IPSC competitions. I also hear that the police like to build take down structures for training purposes there as well.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login








