firearms
-
SKS 7.62x39? Arn't they the ones with the reputation for cooking off rounds when stored in the car,and in sunshine on range?
-
@kirk13 said:
SKS 7.62x39? Arn't they the ones with the reputation for cooking off rounds when stored in the car,and in sunshine on range?Yes, they are known for slam firing. I believe it is because of a heavy non-captured firing pin, but I'm not sure. I had one when they were $79, but I regret I sold it long ago. I don't think they would cook off a round in storage. It takes a lot of heat to do that. There are videos on youtube on the subject.
-
The operation was a success. I had several worries before attempting this, but the online tutorial I downloaded was simply awesome and walked me through it for the first time.
I did say that if I was successful, I would post a few photos...
Here I am starting. Got my MUT which is now my motorcycle/range user. Cleaning kit in the upper left, a clean rag, and the all important instructions.
First step is to deply that bayonet. I must say, that bayonet makes cleaning this rifle a bit entertaining as I tried to fend my overly curious cats from coming to close to that pig sticker during the dis-assembly and cleaning process.

I was wondering how the SKS was restricted to only 5 rounds, as all center fire rifles need to be pined to a max of 5 rounds. I did some online checking, and have noted that some have a pin drilled through the base plate. Mine does not have that. However, after examining it closer and looking a non pined magazine on an online SKS, this is how they pined it so that I can only put in 5 rounds. See that vertical rod...a bit nicer than drilling a hole in the bottom and placing a rod there. This way it doesn't look different from the outside.
Fun part number one, I have to push that piece forward with the dis-assembly pin on my MUT (see that white arrow). It was stiff as all get out but after a few attempts, the trigger assembly was able to come out.
Here is the trigger assembly.
Next, I had to pull the bolt back and pull out the magazine.
Next was to make sure the bolt was closed, and to swing a pin up and to pull it out. There is a pin that prevents this piece from completely being removed. This allows the bolt assembly cover to be slid back and removed. Yeah, one wouldn't want any tension on the bolt spring while doing this. Here, the cover plate is removed and the bolt spring is partially pulled out.
After that, it is a simple matter of taking out the 2 piece bolt carrier. Here you can see the various pieces removed from the rifle.
The first fun part was removing the trigger assembly. The second and most fun part was to remove the wooden stock from the rifle. This required me finding a rubber hammer to gently persuade the metal parts to leave the loving embrace of the wooden furniture. Man this was a tight fit. The MUT was very handy as I was able to gently tap the hammer part of the MUT with the pin deployed onto the metal frame.
Once all of that is removed, the next step is to remove the gas system. This involved swinging an arm upwards. This disengages the gas system from the rifle. Be sure to hold the rifle barrel downwards as the gas piston can prevent removal of the whole gas system.
Here we see that the gas system is now removed.
Now to remove this next part, you have to hold the springed piece with some force as you swing the gas assembly lever a little more open. This disengages and releases this part. The thumb is used to prevent this piece from going into orbit.
Now time to get some cleaning done.
I first started by gently wiping everything except for the gas system parts with a nice cleaner and lubricant.
Next was the bore. This patch in the second photo was white before the cleaning process of the barrel.
Next to go back on is the gas system.
After that was the stock. As it was entertaining to get off, it was equally as entertaining to put back on. Thank you rubber mallet in making this job easier. I had to give the whole thing a few good whacks to get it back on.
After that, everything goes back on in reverse. Not bad. I did have more fun with inserting the trigger assembly however. I tried to get it back on and realized it wasn't going on. I looked at it for a minute and realized the wooden furniture wasn't exactly fully seated in place. A few more good whacks and I was able to tap the trigger assembly back onto that retaining tab.
The gun wasn't very dirty and whoever cleaned it did a real good job. Here is what I got when I wiped everything down. I was expecting Cosmoline everywhere.
Now I have piece of mind...and also I can probably take apart and rebuild this easily next time around. All I needed for tools were a dis-assembly pin, pliers once to move one of the sliders, and a rubber mallet. I also can see how it would be fairly easy to buy a tactical stock and replace the existing one, if I so desire in the future.

-
Now off to the range.

-
Good job and nice score!
That's us mobile
Nate -
Just got back.
Well I love that SKS. Accuracy out the first time is frightening. I shot very well with it. The 30-06 is quite a powerful round, but the kick was very ok. I was expecting something worse to be honest. I still need to sight this one it as I only shot a few rounds to see how it felt.
-
Well I love that SKS. Accuracy out the first time is frightening. I shot very well with it. The 30-06 is quite a powerful round, but the kick was very ok. I was expecting something worse to be honest. I still need to sight this one it as I only shot a few rounds to see how it felt.
I knew you would love it. :D

-
S&W M28. :)
-
Very nice revolver.
That's us mobile
Nate -
Well I love that SKS. Accuracy out the first time is frightening. I shot very well with it. The 30-06 is quite a powerful round, but the kick was very ok. I was expecting something worse to be honest. I still need to sight this one it as I only shot a few rounds to see how it felt.
.30-06 SKS? Never in all my days havr I seen this and I have seen tons of them
Custom mod?
-
Thank you CS and Nate. :) I've always like N frame Smiths.
-
No. I brought an SKS, a 12 gauge shotgun, and a Savage Axis II in 30.06. All use different rounds.
-
-
Looks good!
That's us mobile
Nate -
Looking the part mate :)
-
Yes, that does look good.
As I am gearing to take the Black Badge course early next month, I noticed I had an issue with my S&W M&P, in that it wouldn't accept a full 10 round magazine simply by slapping it in. It will however work if I rack the slide open, lock it open, and then insert the magazine. Yesterday, I got to witness an IPSC handgun competition first hand, and I got to observe most of the contestants, and noted that others didn't seem to have the same issue as my copy did. It saves a lot of time if you can just slap a 10 rounder in the handgun without racking the slide and locking it open. I asked around and found out that you have to shave a little of the bottom of the plate follower. I was told if you take 3mm or so off, that will allow you to feed your gun without having to rack and lock it open first. Faster to feed it and then rack it.
So I started yesterday taking my magazines apart and doing the shaving. Lucky enough the M&P magazines are easy to take apart, and the follower is made of plastic...so sanding the part is not that difficult.
Got my snap caps ready as I need to test each magazine after the shaving to see if it will work.

Enter the MUT once again. I need to use the pin to press down a button which enables me to slide the button portion of the magazine off. Doing that also means making sure the spring doesn't escape and shoot outwards.

One of my magazines dis-assembled. I have to shave off some of those legs on the plastic white/gray follower.

On the finished magazines, I am using battle ship gray to colour in the S&W logo to help me identify them from other competitors. As you can see, I am only half done. Had to stop due to sore fingers.

-
Sounds like things are shaping up nicely.

-
Bet you are excited for the black badge class and some handgun competition.
Never had an issue like you guys and the slide forward mag issue. Must be something with the 10 round mags. It is the 9mm right?
Great pics btw.
-
Yes, I think it has something to do with the 10 round mags.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
















