Leatherman Surge
-
@J-sews said:
Great review Ryan.Hmmmm, it seems to me that there's really nothing seriously wrong with the Surge, it just doesn't live up to some people's expectations. Does that mean maybe those expectations were unreasonably high? Could be.

The Surge apparently isn't an "everyman's" tool. Instead it seems to appeal to a niche of folks with certain extra heavy duty needs who don't mind a little extra weight and unrefined edges.
I think you're right there, it has been hyped up a lot by a few people who really enjoy it and i feel i was let down when i got it in my grubby little mitts.

-
Great review Ryan.
Hmmmm, it seems to me that there's really nothing seriously wrong with the Surge, it just doesn't live up to some people's expectations. Does that mean maybe those expectations were unreasonably high? Could be.

The Surge apparently isn't an "everyman's" tool. Instead it seems to appeal to a niche of folks with certain extra heavy duty needs who don't mind a little extra weight and unrefined edges.
I think you're right there, it has been hyped up a lot by a few people who really enjoy it and i feel i was let down when i got it in my grubby little mitts.

Ah-HAH!! So its all their fault then!

-
-
Lol. I agree with most of what's been said in defence of the 'rattle'. In all honesty, I don't find it any more than say, the split ring on an SAK for example - and mine has no play when you're using any of the tools - I just think the forces in play given the sheer weight of it means that it isn't as 'tight' as smaller tools.
And the blade exchanger is a very good innovation too!
-

::) As not to start a war some might also say that about the Swisstool
I like the Swisstool (that's why I bought one) but it seems no more special to me than my Wave. I guess it all boils down to preference and what 1 gets use to
I think I would probably think the same about the Surge
no more special than my Wave as well
Just me I guess

-
SURGE is American as to Swisstool is to Europeans

-
@duckman1975 said:
SURGE is American as to Swisstool is to Europeans
Good example duckman

-
I don't like my Surge, though not for the reasons I thought.
Initially I assumed the reasons I would not want a Surge were due to the size & exchangeable blades/screwdrivers (I don't believe in loose parts & accessories)
Most if the reason I got one was because it had a reamerspike where the Wave did not.
It turns out it is not near as hard to handle as I thought, I've had no issues with the larger size, but the fit & finish is rubbish, none of the inside tools come out easy (lubricant & use may alter this), the scissors are not fine enough to comfortably cut my nails, the blade-changer consistently fails - allowing the saw to fall out when I try to open the blade. The Plier heads jam open when I try to close the handles & the ruler is even more of a joke than the one of my PST.
I'm disappointed entirely.
I sincerely hope my next LM purchase is of greater satisfaction.
(Some may say I am a nancy cry baby. The Surge is not designed for fine finish & personal grooming, it is for manly, industrial tasks, like gutting sharks & installing intercontinental pipelines, but I don't see why you can't have fine precision quality with robust function & brutal indestructibility.)
-
@Nomad said:
I don't like my Surge, though not for the reasons I thought.Initially I assumed the reasons I would not want a Surge were due to the size & exchangeable blades/screwdrivers (I don't believe in loose parts & accessories)
Most if the reason I got one was because it had a reamerspike where the Wave did not.
It turns out it is not near as hard to handle as I thought, I've had no issues with the larger size, but the fit & finish is rubbish, none of the inside tools come out easy (lubricant & use may alter this), the scissors are not fine enough to comfortably cut my nails, the blade-changer consistently fails - allowing the saw to fall out when I try to open the blade. The Plier heads jam open when I try to close the handles & the ruler is even more of a joke than the one of my PST.
I'm disappointed entirely.
I sincerely hope my next LM purchase is of greater satisfaction.
Well said Mr Nomad

@Nomad said:
(Some may say I am a nancy cry baby. The Surge is not designed for fine finish & personal grooming, it is for manly, industrial tasks, like gutting sharks & installing intercontinental pipelines, but I don't see why you can't have fine precision quality with robust function & brutal indestructibility.)Like a Swisstool!

-
For those who feel I am being prematurely unfair, I will confess these views are based on only a short time of handling.
Further opinions, possibly more positive, with be forthcoming as I carry the Surge over the following week(s?).
-
Keep us updated mate

-
says the man who keeps the swiss tool as the one and only decent plier based mt

yes keep us posted,i use surge too and its fun to hear opinions from other heavy users.
-
-
Back on a friends cpu.. Why do you guys think the fit and finish is so bad?
-
@Leatherman123 said:
Back on a friends cpu.. Why do you guys think the fit and finish is so bad?Because it is.

The edges are rough and jagedy, it rattles (but we have discussed this) and it just doesn't have a quality feel like other LM's.
TBH, I thought the Surge felt like it was unfinished.
-
I guess I have gotten used to it..
-
I really don't get this "fit and finish" criticism. I have mine in hand as I type this, and I can see precisely no flaws in it at all. It's tight, and perfectly well put together.
I can understand that people simply don't like it, but rubbishing on the basis of quality I find bizarre.
@Nomad said:
It turns out it is not near as hard to handle as I thought, I've had no issues with the larger size, but the fit & finish is rubbish, none of the inside tools come out easy (lubricant & use may alter this), the scissors are not fine enough to comfortably cut my nails, the blade-changer consistently fails - allowing the saw to fall out when I try to open the blade. The Plier heads jam open when I try to close the handles & the ruler is even more of a joke than the one of my PST.Are you sure you've got a real one, as these points could not be applied to any Leatherman Surge I have ever seen? And I've seen a few.
I can't actually figure out how the blade exchanger could fail as you open it - it doesn't seem possible as the pivoted "housing" for the exchanger would have to to be opened into the tool's handles from the closed position, which obviously isn't possible, yet there's no way the blade could fall out without the "housing" being opened, there simply isn't the tolerance.
I can't find any problems with the scissors either. The plier sticking open is typical of all Leatherman extra-large/full-sized tools, and even the Juice range, but will disappear with use.
-
-
@Benner said:
I can't say I noticed what Nomad is saying about the tools smoothness etc, but the edges of the Surges handles were rough and felt very shoddily done IMO.Older tools such as my Supertool have a far better finish (IMO) than that Surge that I handled.
What my Surge? I have it here now and the handles have no rough / shoddy features at all. The area of the handle that you grip when using the pliers is folded and rounded, so there's actually nothing there to "fit" well or otherwise.
I've commented on this forum before that the Surge isn't really to my liking, but I think that suggesting that it's quality is lacking or that it is shoddy is well wide of the mark.
-
I can't say I noticed what Nomad is saying about the tools smoothness etc, but the edges of the Surges handles were rough and felt very shoddily done IMO.
Older tools such as my Supertool have a far better finish (IMO) than that Surge that I handled.
What my Surge? I have it here now and the handles have no rough / shoddy features at all. The area of the handle that you grip when using the pliers is folded and rounded, so there's actually nothing there to "fit" well or otherwise.
I've commented on this forum before that the Surge isn't really to my liking, but I think that suggesting that it's quality is lacking or that it is shoddy is well wide of the mark.
Actually I was referring to Def's one (sorry Def! :D) and what I was referring to was the roughness of the handles up near the plier head. It was actually one of the first things I noticed as even compared to my original Wave it felt rough and like I said "unfinished". Every other LM product I have been impressed with the quality, but this I have to say I found disappointing.
Still, it may have just been a one off (although Nomad seems to have similar issues as well) and it certainly would not put me off buying from them in the future.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login