Leatherman Surge
-
I can't say I noticed what Nomad is saying about the tools smoothness etc, but the edges of the Surges handles were rough and felt very shoddily done IMO.
Older tools such as my Supertool have a far better finish (IMO) than that Surge that I handled.
What my Surge? I have it here now and the handles have no rough / shoddy features at all. The area of the handle that you grip when using the pliers is folded and rounded, so there's actually nothing there to "fit" well or otherwise.
I've commented on this forum before that the Surge isn't really to my liking, but I think that suggesting that it's quality is lacking or that it is shoddy is well wide of the mark.
Actually I was referring to Def's one (sorry Def! :D) and what I was referring to was the roughness of the handles up near the plier head. It was actually one of the first things I noticed as even compared to my original Wave it felt rough and like I said "unfinished". Every other LM product I have been impressed with the quality, but this I have to say I found disappointing.
Still, it may have just been a one off (although Nomad seems to have similar issues as well) and it certainly would not put me off buying from them in the future. :)
-
@Benner said:
Still, it may have just been a one off (although Nomad seems to have similar issues as well) and it certainly would not put me off buying from them in the future. :)Maybe you're right. I'm not really the type to blindly defend something and I there are some characteristics of the Surge that I'm not overly impressed with (like the rattle) but I honestly cannot see any quality issues with mine or the half dozen or so I've bought / sold.
I just feel the Surge get's a bit of unfair stick, maybe as has been said - it was overhyped in the first place! I recall seeing the Swisstool at the meet for the first time, and whilst I wasn't exactly disappointed, I wasn't excited either! I'm not sure what I expected it to do, but needless to say - it didn't!
Maybe we should adopt a policy of not talking about tools on the site in case we prejudice people's opinions of them ............ oh. Ah.
:D
-
I think we should ban all tool talk completely. :D
I agree, part of my "problem" with the Surge is that I wanted to really like it (as LM123 would say, it has everything! :D) and I just didn't :(, and I think I am more disappointed than anything.
Compared to my Charge and my Supertool I do still feel it is not as nicely finished though.
-
@duckman1975 said:
SURGE is American as to Swisstool is to Europeans :DWhat oversized and over the top :P ;)
Dunc
-
You just wait until my Skeletool review :D
Dunc
-
@Benner said:
I think we should ban all tool talk completely. :DI agree, part of my "problem" with the Surge is that I wanted to really like it (as LM123 would say, it has everything! :D) and I just didn't :(, and I think I am more disappointed than anything.
Compared to my Charge and my Supertool I do still feel it is not as nicely finished though.
i ve had two charges too,theyre so good on finishing,but maybe,just maybe its partly because of those cast handles that appear and feel more comfortable,so the whole tool seems also a bit better made.?
ive had supertools too and i liked em as well.
but now i have a SURGE!!! and i wouldnt trade it for those mentioned above due to its huge size and heavy duty design.

-
I don't have a good Camera so I can't show you the poor finish.
I don't mind the "rough"ness of the sheet metal edges, but all the corners are not ground neatly, some have half a mm of flat, or a different radius to the matching corner opposite etc- as if this was ground by an apprentice & not a highly calibrated machine.
One inside corner has either a crack or a dent right in the "L" of itThe end fittings that hole the inside tools are attached crooked, and have large, inconsistent gaps between themselves & the rest of the handle
To describe the blade exchanger failure- when I pull out the saw using the nail nick at the tip-end, the Saw & middle part of the mount come out, but the outside sheet that holds it in remains in the handle.
I have tried squeezing this part so it holes the Saw tighter to no avail, as the handles themselves squeeze it enough to loosen it again next time I draw the Saw.
In actual use so far I have only used the scissors to cut cloth - they work fabulously.
After three days in my pocket, the bead-blasted areas are already gathering Rust Spots (Something I never had an issue with with my PST, which I have frequently used in aquatic adventures)
Edit - After careful examination, I can see that one side of the handles is flaired in slightly (same on matching side - So Saw & Scissors slightly bent in, both knives slightly bent out)
is this a design thing, or are the handled supposed to have a nice U shape profile and mine are skewed?
-
I am looking forward to the successor to the Surge. I like a lot of the Surge's ideas, and a "Surge 2009" model would give LM a chance to address many of these issues, and add more neat tricks.
A tool is much more than the some of its implements. Issues like handles, feel, snap, design, colour, etc. shape our appreciation of a tool as much as its utility. That is why Vic has such a loyal following, and why people spend a lot extra to get the Charge's handles instead of just getting a Wave.
A tight, snappy tool just feels more reliable and well-engineered. As a consumer, I am put off by looseness or rattles, etc. In reality, the snap of the tools may not affect the reliability of a tool, but it is what I have come to expect.
Actually, I have a suspicion that people who coming from the SAK world are much more judgmental about the snap and tightness of a tool than others.
As well, visual appearance matters. The Charge looks great. So does the Spirit. And the Skeletool. Look at everyone going ga-ga over alox in another thread.
I think at this point in the history of multitools, the emphasis is increasingly going to focus on looks and feel. Let's face it, that is all that differentiates many MTs. And I am not against it at all. I'll buy the very first Surge II with HAIII iPod pink handles that LM puts out! :D
-
There's some weird sounding things there Nomad. Where did you get it from? I'm wondering if you've got a dud, as I have none of these issues with mine.
I understand the problem with the blade exchanger now, although I can't make it happen with mine. I always use the protruding part of the exchanger itself as a nail nick to get the blade out (I thought that was what it was for tbh).
@Nomad said:
Edit - After careful examination, I can see that one side of the handles is flaired in slightly (same on matching side - So Saw & Scissors slightly bent in, both knives slightly bent out)is this a design thing, or are the handled supposed to have a nice U shape profile and mine are skewed?
The U shape should be consistent from top to bottom, the top and bottom of the cavity that each of the external tools fold into should be parallel to each other. I.e lying the tool down flat on its side, the upper surface should be level and even. If I understand you right, it sounds like your tool has been squished?
-
If I understand you right, it sounds like your tool has been squished?
More like twisted, as it goes inwards on one side and outwards on the other.
I am looking forward to the successor to the Surge. I like a lot of the Surge's ideas, and a "Surge 2009" model would give LM a chance to address many of these issues, and add more neat tricks.
I have always preferred Mk II
(With the general exception of Movies)
-
This just in:
The Surge can opener is as to PST can opener what lightning is as to a matchstick.
Hot Damn! I've never cracked into tinned liver so fast!
Does anyone have links to External Surge reviews? I want to know on what basis this thing is touted so highly.
Edit:
I performed a little tool servicing this morning.
For the most part, this means emptying a can of lubricant into it, but I also bent the lock on the blade-exchanged a bit so it works better now, and I worried the tabs inside the handles that close the plier head so that it closes sooner (ie. Before it puts huge gouges into the "hex" bit holder. The downside is now the handles don't snap as close together.)Edit II:
Cutting Cable Ties - Good Fun! -
the bit holder and the can opener on my SURGE doesn't properly close tight when closed, it doesn't bother me much but does anybody else have this problem. Both just flew open when I do the one hand open flip on the pliers.
-
@duckman1975 said:
the bit holder and the can opener on my SURGE doesn't properly close tight when closed, it doesn't bother me much but does anybody else have this problem. Both just flew open when I do the one hand open flip on the pliers.Duckman I had the same issue with my Surge , tightening the screws fixed the problem, T10 security tool bit did the job nicely.
-
Thanks multimat, is it the same with the blades the screws sometimes rotate with the blade.
-
@duckman1975 said:
Thanks multimat, is it the same with the blades the screws sometimes rotate with the blade.I have not had that problem the blade screws ,is the blade loose? You could try tightening it with the T10 security bit (make sure it is hollow to accommodate the metal lump in the center of the screws) I think with the blade screw you may have to apply Loctite to stop it becoming loose again.Try tightening it & see what happens.
-
I used my Surge at work today (usually carry the PST for work but it is being used for another purpose at the moment)
Compared the the PST, using the Surge to cut steel welding rod was like caressing a supple breast.
Which is nice, because using the outside tools on the Surge is no fun at all.
-
Thanks multimat, is it the same with the blades the screws sometimes rotate with the blade.
I have not had that problem the blade screws ,is the blade loose? You could try tightening it with the T10 security bit (make sure it is hollow to accommodate the metal lump in the center of the screws) I think with the blade screw you may have to apply Loctite to stop it becoming loose again.Try tightening it & see what happens.
Bought 2 sets of T10 security torx thighten the lose parts and its good to go :D
I love my SURGE the only time its not beside me is when I go out of my province.
I have a maintenance schedule of around every 3 months, I wash down the whole tool with water and soap, towel it down and sun dry it for 15 mins or until bone dry sometimes use a hair dryer if I'm in a hurry, be careful of the rubber part of the scissors when doing this. After drying use wd40 on the whole tool then wipe excess. -
@duckman1975 said:
Bought 2 sets of T10 security torx thighten the lose parts and its good to go :D
I love my SURGE the only time its not beside me is when I go out of my province.
I have a maintenance schedule of around every 3 months, I wash down the whole tool with water and soap, towel it down and sun dry it for 15 mins or until bone dry sometimes use a hair dryer if I'm in a hurry, be careful of the rubber part of the scissors when doing this. After drying use wd40 on the whole tool then wipe excess.Good to hear buddy :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login