And so it begins.... (My adventures into Alox!)
-
My next custom will involve a Cybertool driver so you have my attention for sure.
Just thought of something. If we didn't use the bit holder thing could the bit driver be put on a 93mm Alox custom?
-
@HarleyXJGuy said:
Just thought of something. If we didn't use the bit holder thing could the bit driver be put on a 93mm Alox custom?Yup Im sure it could, you just wouldnt have the bits and there would be a big vacant space inside the SAK.
-
Just thought of something. If we didn't use the bit holder thing could the bit driver be put on a 93mm Alox custom?
Yup Im sure it could, you just wouldnt have the bits and there would be a big vacant space inside the SAK.
Hmm what could the space be used for?
Mostly want the driver for the reach it offers not so much for the bits. Of course some bits could be carried off the tool. Plus if it was built on a 93mm frame I could have the mag glass / opening layer instead of a phillips like on the custom 91mm CT I have now. No need for the phillips when you got the bit driver imo.
-
Or better yet mag glass and just the bottle opener for prying and beer. Could live without the ability to open cans and the small flathead comes on the phillips bit already.
Would be relatively thin for as many tools would be on it.
-
Robert, do you think you could make a CT bit holder out of a nicer material than plastic, e.g. brass or alumin(i)um? Titanium would be even cooler but probably impossible ;)
-
@Reinier said:
Robert, do you think you could make a CT bit holder out of a nicer material than plastic, e.g. brass or alumin(i)um? Titanium would be even cooler but probably impossible ;)Or, what about a full length double layer backspring that will catch the cybertool at the end? This way it looks as if it's made just for that tool rather then plastic but you loose out on the extra bits? You'll still have the one bit, you just get stuck carrying any extras..
JR -
Robert, do you think you could make a CT bit holder out of a nicer material than plastic, e.g. brass or alumin(i)um? Titanium would be even cooler but probably impossible ;)
Or, what about a full length double layer backspring that will catch the cybertool at the end? This way it looks as if it's made just for that tool rather then plastic but you loose out on the extra bits? You'll still have the one bit, you just get stuck carrying any extras..
JRYeah, I didn't think about the little nub that holds the bit in the driver when it is closed. A custom back spring with that as part of it would be sweet. I am thinking brass. Shouldn't be to hard to cut.
-
Robert, do you think you could make a CT bit holder out of a nicer material than plastic, e.g. brass or alumin(i)um? Titanium would be even cooler but probably impossible ;)
Or, what about a full length double layer backspring that will catch the cybertool at the end? This way it looks as if it's made just for that tool rather then plastic but you loose out on the extra bits? You'll still have the one bit, you just get stuck carrying any extras..
JRYeah, I didn't think about the little nub that holds the bit in the driver when it is closed. A custom back spring with that as part of it would be sweet. I am thinking brass. Shouldn't be to hard to cut.
Ya there are a few ways that could be tackled, but for sure doable. What I would do to fill the space is something to hold the bits but it couldnt be as complex as the plastic one. Maybe just a brass holder with drilled holed, but magnets in bottom to retain bits.
@Reinier said:
Robert, do you think you could make a CT bit holder out of a nicer material than plastic, e.g. brass or alumin(i)um? Titanium would be even cooler but probably impossible ;)It would be complex to reproduce that part exactly in metal, but that would be the best option. Possible though to make something of Al or brass that could service the same function, but alot of labor to do by hand.
-
Robert, do you think you could make a CT bit holder out of a nicer material than plastic, e.g. brass or alumin(i)um? Titanium would be even cooler but probably impossible ;)
Or, what about a full length double layer backspring that will catch the cybertool at the end? This way it looks as if it's made just for that tool rather then plastic but you loose out on the extra bits? You'll still have the one bit, you just get stuck carrying any extras..
JRYeah, I didn't think about the little nub that holds the bit in the driver when it is closed. A custom back spring with that as part of it would be sweet. I am thinking brass. Shouldn't be to hard to cut.
Ya there are a few ways that could be tackled, but for sure doable. What I would do to fill the space is something to hold the bits but it couldnt be as complex as the plastic one. Maybe just a brass holder with drilled holed, but magnets in bottom to retain bits.
@Reinier said:
Robert, do you think you could make a CT bit holder out of a nicer material than plastic, e.g. brass or alumin(i)um? Titanium would be even cooler but probably impossible ;)It would be complex to reproduce that part exactly in metal, but that would be the best option. Possible though to make something of Al or brass that could service the same function, but alot of labor to do by hand.
Couldn't you print that part?
-
[quote author=Reinier link=topic=34772.msg1076610#msg1076610 date=1429594949]
Robert, do you think you could make a CT bit holder out of a nicer material than plastic, e.g. brass or alumin(i)um? Titanium would be even cooler but probably impossible ;)Or, what about a full length double layer backspring that will catch the cybertool at the end? This way it looks as if it's made just for that tool rather then plastic but you loose out on the extra bits? You'll still have the one bit, you just get stuck carrying any extras..
JRYeah, I didn't think about the little nub that holds the bit in the driver when it is closed. A custom back spring with that as part of it would be sweet. I am thinking brass. Shouldn't be to hard to cut.
Ya there are a few ways that could be tackled, but for sure doable. What I would do to fill the space is something to hold the bits but it couldnt be as complex as the plastic one. Maybe just a brass holder with drilled holed, but magnets in bottom to retain bits.
@Reinier said:
Robert, do you think you could make a CT bit holder out of a nicer material than plastic, e.g. brass or alumin(i)um? Titanium would be even cooler but probably impossible ;)It would be complex to reproduce that part exactly in metal, but that would be the best option. Possible though to make something of Al or brass that could service the same function, but alot of labor to do by hand.
Couldn't you print that part?
[/quote]That technology isnt up to what I would consider as acceptable quality yet especially im metal. My OCD couldnt take it!
-
Robert, do you think you could make a CT bit holder out of a nicer material than plastic, e.g. brass or alumin(i)um? Titanium would be even cooler but probably impossible ;)
Or, what about a full length double layer backspring that will catch the cybertool at the end? This way it looks as if it's made just for that tool rather then plastic but you loose out on the extra bits? You'll still have the one bit, you just get stuck carrying any extras..
JRYeah, I didn't think about the little nub that holds the bit in the driver when it is closed. A custom back spring with that as part of it would be sweet. I am thinking brass. Shouldn't be to hard to cut.
Ya there are a few ways that could be tackled, but for sure doable. What I would do to fill the space is something to hold the bits but it couldnt be as complex as the plastic one. Maybe just a brass holder with drilled holed, but magnets in bottom to retain bits.
@Reinier said:
Robert, do you think you could make a CT bit holder out of a nicer material than plastic, e.g. brass or alumin(i)um? Titanium would be even cooler but probably impossible ;)It would be complex to reproduce that part exactly in metal, but that would be the best option. Possible though to make something of Al or brass that could service the same function, but alot of labor to do by hand.
Yeah it does not have to match the original just function correctly. I know if it was squared off it would be way easier to make but still work fine.
Also since it was my idea I get a discount on mine and royalties for future production right?

-
Unfortunately printing in metal is a bit too expensive as well (apart from the finish being a bit meh), even though my contact only charges me for the material used.
I can ask him if it's possible to print the bit holder in ABS (orange
) :P -
Would you CNC mill it, after cutting it out on a computerised device?
-
-
Woohoo... anodizing starter kit arrived. I still need the power supply and sulfuric acid, then I can start blowing up my shed... er creating beautiful alox I mean. :D
-
91mm Ti Apprentice today.






-
Nice one Syph !
-
Can't wait to see some anodized stuff!
-
And here is the odd duck dual backtool one I had mentioned earlier.
It kind of feels odd, and I dont think I'll be repeating it ever, but I accepted the job as a technical challenge and it was interesting. It was much more work than I thought however, getting the phillips to work on a scissor backspring and being flipped around.
I milled slots for the standard T&T and I much prefer the metal nibbed versions I had done previously.





Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login