And so it begins.... (My adventures into Alox!)
-
Robert, do you think you could make a CT bit holder out of a nicer material than plastic, e.g. brass or alumin(i)um? Titanium would be even cooler but probably impossible ;)
Or, what about a full length double layer backspring that will catch the cybertool at the end? This way it looks as if it's made just for that tool rather then plastic but you loose out on the extra bits? You'll still have the one bit, you just get stuck carrying any extras..
JRYeah, I didn't think about the little nub that holds the bit in the driver when it is closed. A custom back spring with that as part of it would be sweet. I am thinking brass. Shouldn't be to hard to cut.
Ya there are a few ways that could be tackled, but for sure doable. What I would do to fill the space is something to hold the bits but it couldnt be as complex as the plastic one. Maybe just a brass holder with drilled holed, but magnets in bottom to retain bits.
@Reinier said:
Robert, do you think you could make a CT bit holder out of a nicer material than plastic, e.g. brass or alumin(i)um? Titanium would be even cooler but probably impossible ;)It would be complex to reproduce that part exactly in metal, but that would be the best option. Possible though to make something of Al or brass that could service the same function, but alot of labor to do by hand.
Yeah it does not have to match the original just function correctly. I know if it was squared off it would be way easier to make but still work fine.
Also since it was my idea I get a discount on mine and royalties for future production right?

-
Unfortunately printing in metal is a bit too expensive as well (apart from the finish being a bit meh), even though my contact only charges me for the material used.
I can ask him if it's possible to print the bit holder in ABS (orange
) :P -
Would you CNC mill it, after cutting it out on a computerised device?
-
-
Woohoo... anodizing starter kit arrived. I still need the power supply and sulfuric acid, then I can start blowing up my shed... er creating beautiful alox I mean. :D
-
91mm Ti Apprentice today.






-
Nice one Syph !
-
Can't wait to see some anodized stuff!
-
And here is the odd duck dual backtool one I had mentioned earlier.
It kind of feels odd, and I dont think I'll be repeating it ever, but I accepted the job as a technical challenge and it was interesting. It was much more work than I thought however, getting the phillips to work on a scissor backspring and being flipped around.
I milled slots for the standard T&T and I much prefer the metal nibbed versions I had done previously.





-
@Syph007 said:
And here is the odd duck dual backtool one I had mentioned earlier.It kind of feels odd, and I dont think I'll be repeating it ever, but I accepted the job as a technical challenge and it was interesting. It was much more work than I thought however, getting the phillips to work on a scissor backspring and being flipped around.
I milled slots for the standard T&T and I much prefer the metal nibbed versions I had done previously.





Now that I like! Make me one without scissors and add a few other tools
Sent from my iPhone using Tapatalk
-
How does the thickness of those TI scales compare to the stock plastic and Alox scales? Remeber seeing a comparison of the new hand grenade 91mm scales, but not the TI ones.
-
@tommywp said:
How does the thickness of those TI scales compare to the stock plastic and Alox scales? Remeber seeing a comparison of the new hand grenade 91mm scales, but not the TI ones.The Ti scales are thinner than cellidor and 93mm alox. Its more noticeable on a cellidor conversion since the liners are dropped too saving even more thickness.
That single layer Ti model is thinner than an alox solo for example.
-
Syph,
I just have to suggest your next mod/project (like you don't have enough already ;) ).
You asked in a different topic "what should be the next Vic layer?". Well, since you now make your own scales, and mill slots for the T&T, and do pretty much everything else SAK-wise, you certainly have the capability to make a layer with the main blade and a really beefed up Combo Tool. You could improve one of the weakest Vic tools out there, and maybe mill a relief into a scale to allow it clearance against the main blade.
Actually, if the main blade is crinked a little more than it currently is, maybe a relief isn't necessary even. Just make a slightly thicker than standard liner that the blade tip could wander over into? -
@neillcurrie said:
Syph,
I just have to suggest your next mod/project (like you don't have enough already ;) ).
You asked in a different topic "what should be the next Vic layer?". Well, since you now make your own scales, and mill slots for the T&T, and do pretty much everything else SAK-wise, you certainly have the capability to make a layer with the main blade and a really beefed up Combo Tool. You could improve one of the weakest Vic tools out there, and maybe mill a relief into a scale to allow it clearance against the main blade.
Actually, if the main blade is crinked a little more than it currently is, maybe a relief isn't necessary even. Just make a slightly thicker than standard liner that the blade tip could wander over into?I've been asked many times to put the bottle opener in the blade layer, and that for sure is on my todo list. Its a better pry tool, and it seems most people dont care about can openers. The nail nick is on the other side though so the blade would have to be bent straight and the bottle opener would sit on the other side of the blade. This would have a secondary benefit too of having a straight main blade instead of a bent one.
-
It's too bad wenger parts won't fit. I've ran into both left and right handed straight screwdrivers.
Sent from my iPhone using Tapatalk
-
@Syph007 said:
I've been asked many times to put the bottle opener in the blade layer, and that for sure is on my todo list. Its a better pry tool, and it seems most people dont care about can openers. The nail nick is on the other side though so the blade would have to be bent straight and the bottle opener would sit on the other side of the blade. This would have a secondary benefit too of having a straight main blade instead of a bent one.Why not just make a new nail nick in the opposite side?
-
Syph,
I just have to suggest your next mod/project (like you don't have enough already ;) ).
You asked in a different topic "what should be the next Vic layer?". Well, since you now make your own scales, and mill slots for the T&T, and do pretty much everything else SAK-wise, you certainly have the capability to make a layer with the main blade and a really beefed up Combo Tool. You could improve one of the weakest Vic tools out there, and maybe mill a relief into a scale to allow it clearance against the main blade.
Actually, if the main blade is crinked a little more than it currently is, maybe a relief isn't necessary even. Just make a slightly thicker than standard liner that the blade tip could wander over into?I've been asked many times to put the bottle opener in the blade layer, and that for sure is on my todo list. Its a better pry tool, and it seems most people dont care about can openers. The nail nick is on the other side though so the blade would have to be bent straight and the bottle opener would sit on the other side of the blade. This would have a secondary benefit too of having a straight main blade instead of a bent one.
Bottle opener and blade would be awesome.
Still a fan of a bit driver on a 93 though.
-
Another Ti Cybertool born today. :D









-
That's rather tasty.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login