And so it begins.... (My adventures into Alox!)
-
-
Woohoo... anodizing starter kit arrived. I still need the power supply and sulfuric acid, then I can start blowing up my shed... er creating beautiful alox I mean. :D
-
91mm Ti Apprentice today.






-
Nice one Syph !
-
Can't wait to see some anodized stuff!
-
And here is the odd duck dual backtool one I had mentioned earlier.
It kind of feels odd, and I dont think I'll be repeating it ever, but I accepted the job as a technical challenge and it was interesting. It was much more work than I thought however, getting the phillips to work on a scissor backspring and being flipped around.
I milled slots for the standard T&T and I much prefer the metal nibbed versions I had done previously.





-
@Syph007 said:
And here is the odd duck dual backtool one I had mentioned earlier.It kind of feels odd, and I dont think I'll be repeating it ever, but I accepted the job as a technical challenge and it was interesting. It was much more work than I thought however, getting the phillips to work on a scissor backspring and being flipped around.
I milled slots for the standard T&T and I much prefer the metal nibbed versions I had done previously.





Now that I like! Make me one without scissors and add a few other tools
Sent from my iPhone using Tapatalk
-
How does the thickness of those TI scales compare to the stock plastic and Alox scales? Remeber seeing a comparison of the new hand grenade 91mm scales, but not the TI ones.
-
@tommywp said:
How does the thickness of those TI scales compare to the stock plastic and Alox scales? Remeber seeing a comparison of the new hand grenade 91mm scales, but not the TI ones.The Ti scales are thinner than cellidor and 93mm alox. Its more noticeable on a cellidor conversion since the liners are dropped too saving even more thickness.
That single layer Ti model is thinner than an alox solo for example.
-
Syph,
I just have to suggest your next mod/project (like you don't have enough already ;) ).
You asked in a different topic "what should be the next Vic layer?". Well, since you now make your own scales, and mill slots for the T&T, and do pretty much everything else SAK-wise, you certainly have the capability to make a layer with the main blade and a really beefed up Combo Tool. You could improve one of the weakest Vic tools out there, and maybe mill a relief into a scale to allow it clearance against the main blade.
Actually, if the main blade is crinked a little more than it currently is, maybe a relief isn't necessary even. Just make a slightly thicker than standard liner that the blade tip could wander over into? -
@neillcurrie said:
Syph,
I just have to suggest your next mod/project (like you don't have enough already ;) ).
You asked in a different topic "what should be the next Vic layer?". Well, since you now make your own scales, and mill slots for the T&T, and do pretty much everything else SAK-wise, you certainly have the capability to make a layer with the main blade and a really beefed up Combo Tool. You could improve one of the weakest Vic tools out there, and maybe mill a relief into a scale to allow it clearance against the main blade.
Actually, if the main blade is crinked a little more than it currently is, maybe a relief isn't necessary even. Just make a slightly thicker than standard liner that the blade tip could wander over into?I've been asked many times to put the bottle opener in the blade layer, and that for sure is on my todo list. Its a better pry tool, and it seems most people dont care about can openers. The nail nick is on the other side though so the blade would have to be bent straight and the bottle opener would sit on the other side of the blade. This would have a secondary benefit too of having a straight main blade instead of a bent one.
-
It's too bad wenger parts won't fit. I've ran into both left and right handed straight screwdrivers.
Sent from my iPhone using Tapatalk
-
@Syph007 said:
I've been asked many times to put the bottle opener in the blade layer, and that for sure is on my todo list. Its a better pry tool, and it seems most people dont care about can openers. The nail nick is on the other side though so the blade would have to be bent straight and the bottle opener would sit on the other side of the blade. This would have a secondary benefit too of having a straight main blade instead of a bent one.Why not just make a new nail nick in the opposite side?
-
Syph,
I just have to suggest your next mod/project (like you don't have enough already ;) ).
You asked in a different topic "what should be the next Vic layer?". Well, since you now make your own scales, and mill slots for the T&T, and do pretty much everything else SAK-wise, you certainly have the capability to make a layer with the main blade and a really beefed up Combo Tool. You could improve one of the weakest Vic tools out there, and maybe mill a relief into a scale to allow it clearance against the main blade.
Actually, if the main blade is crinked a little more than it currently is, maybe a relief isn't necessary even. Just make a slightly thicker than standard liner that the blade tip could wander over into?I've been asked many times to put the bottle opener in the blade layer, and that for sure is on my todo list. Its a better pry tool, and it seems most people dont care about can openers. The nail nick is on the other side though so the blade would have to be bent straight and the bottle opener would sit on the other side of the blade. This would have a secondary benefit too of having a straight main blade instead of a bent one.
Bottle opener and blade would be awesome.
Still a fan of a bit driver on a 93 though.
-
Another Ti Cybertool born today. :D









-
That's rather tasty.
-
Syph my friend. You have accomplished what I tried to when I first joined and learned of this place. My hat is off to you.
Sent from my iPhone using Tapatalk
-
@tattoosteve99 said:
Syph my friend. You have accomplished what I tried to when I first joined and learned of this place. My hat is off to you.Sent from my iPhone using Tapatalk
I'd like to build a few different configurations of these for myself, but damn the donors for cybertool mods are crazy expensive.
-
I want one [emoji45]
Sent from my iPhone using A box of monkeys on a treadmill and a quantum leap
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
