Replacing Crunch knife with something else?
-
Good work Shawn. IMO the blade could have been flipped to cut on the pull. Can't wait to see the finished product.
-
Thanks! I tried cutting a piece of angle steel on the pull and the push, and found that in order to get the teeth to grab on a low TPI saw a push worked better. On fine tooth a pull worked better. I'll see how it works out though
-
<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0661_zpsbz4p1blg.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0661_zpsbz4p1blg.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Here is the finished prototype. I slightly messed up the lock detent but it functions fine. I ended up not liking the push cut, and it looks too aggressive. Next version will include a pull cut and finer teeth. <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0658_zpswv0ee03d.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0658_zpswv0ee03d.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Where can I find the washers if I were to use a thinner blade? I don't have the skills to make them. I do have access to a laser cutter at school though...
-
@Shawn Cimonetti said:
<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0661_zpsbz4p1blg.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0661_zpsbz4p1blg.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Here is the finished prototype. I slightly messed up the lock detent but it functions fine. I ended up not liking the push cut, and it looks too aggressive. Next version will include a pull cut and finer teeth. <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0658_zpswv0ee03d.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0658_zpswv0ee03d.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Where can I find the washers if I were to use a thinner blade? I don't have the skills to make them. I do have access to a laser cutter at school though...
can u made me one? i will buy it put on rebar and ST300
-
Looks like it is coming along nicely. You could use some blade scraps to make washers. I have even plastic bottles to make spacers. I was looking at your unity knife are you flooring installer?
Sent from my iPhone using Tapatalk
-
Have you seen my post on modifying a Crunch for UK EDC?
I've not finished it yet but at the end I mention turning up a finger-nut which will allow me to remove the blade without tools. -
@Biker_Bob said:
Have you seen my post on modifying a Crunch for UK EDC?
I've not finished it yet but at the end I mention turning up a finger-nut which will allow me to remove the blade without tools.I have not seen that, I will definitely check it out!
-
@Mike 56 said:
Looks like it is coming along nicely. You could use some blade scraps to make washers. I have even plastic bottles to make spacers. I was looking at your unity knife are you flooring installer?Sent from my iPhone using Tapatalk
Plastic sounds easy and smooth, I might try that.
I love the Stanley fixed blades for shop work, but I am a high school student. I've done some carpet work and can appreciate the difference between those and the sliders.
-
I finished up the mod, but I plan on doing a final version that is perfect and cuts on the pull.<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0665_zpsf08yxd8e_edit_1425594258917_zpsjs94trwu.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0665_zpsf08yxd8e_edit_1425594258917_zpsjs94trwu.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0666_zpsilhjgzgc.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0666_zpsilhjgzgc.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> I used brake cleaner and to my surprise it stripped all the paint off.<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0668_zpsskkeu4rv.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0668_zpsskkeu4rv.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0669_zps9mczqfgc.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0669_zps9mczqfgc.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
It works fine though<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0670_zpsa9mnaudk.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0670_zpsa9mnaudk.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
After following my tracing lines perfectly, it wasn't anywhere near fitting proper. After about an hour of filing, testing and putting on the finishing touches it worked! -
Great job

-
[/quote]
can u made me one? i will buy it put on rebar and ST300
[/quote]Hmmm, I've thought about this and unfortunately I can't. I don't have either of those multitools and need to have them to make the custom fit. If I can find a way to layout the shape perfectly I would gladly make them. I'm thinking maybe a hi res photo, some caliper measurements, photoshop and a printer?
-
Nice work. I'd like to do the same to a number of tools.
-
It's a nice job, but aren't you worried that you've replaced a locking sharp edged implement with another locking sharp edged implement?
-
@Biker_Bob said:
It's a nice job, but aren't you worried that you've replaced a locking sharp edged implement with another locking sharp edged implement?Yes actually. I don't plan on carrying this in the place I was talking about before. I am still going to try to put in a bit driver or something.
As soon as I finished the first prototype I realized it still looks like a knife. I still made a second just because!<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0699_zpsgr9kebt0.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0699_zpsgr9kebt0.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/Mobile Uploads/KIMG0700_zpswycwfgqr.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/Mobile Uploads/KIMG0700_zpswycwfgqr.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I don't consider this to be acceptable, even though the edge is not sharp at all, it still looks like a blade to anybody else. -
That's nice work Shawn

-
Thanks kirk, I tried something different today. I got the third prototype of a large flathead somewhat finished. I use large aluminium flatheads on manfrotto QR plates all the time doing photo and video work. They always get torn up and I never have coins easily accessible (they are designed to be undone with a quarter) but when I am all rigged up and shooting I don't have a wallet easily accessible, but I do have a leatherman on my hip!
I cut a bit out of the edge of a hardened saw blade. I grabbed a quick pic to test out my new lens.
<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/IMG_1373_zps26y54m06.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/IMG_1373_zps26y54m06.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Using my craftsman 6x48 mounted on my table saw I ground it to shape. It was at this point I realized the motor ran backwards! I have always used it horizontally, but the belt runs upward. It sprays filings in your face but works!
<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/IMG_1483_zpsumns00dw.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/IMG_1483_zpsumns00dw.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I am currently moving everything around and nothing is set up, hence the missing motors on everything!I used the original blade as a template, but in the end you have to custom fit no matter how close it looks. It gets down to a few sharpening file strokes at the end. <a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/IMG_1474_zpsmary45hp.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/IMG_1474_zpsmary45hp.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
It took a lot of files, but by the end I had it down to only like 4.
<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/IMG_1476_zpsc9e7zyws.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/IMG_1476_zpsc9e7zyws.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Once I got that into shape, I wetsanded it up to 1000 grit from 220.
<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/IMG_1493_zpsgyljoakc.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/IMG_1493_zpsgyljoakc.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/IMG_1495_zpsledzmxzm.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/IMG_1495_zpsledzmxzm.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/IMG_1505_zpszdu8bblw.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/IMG_1505_zpszdu8bblw.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Do the edges too.
<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/IMG_1503_zpshee3w8g7.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/IMG_1503_zpshee3w8g7.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Getting it all back together is a huge pain, but it's doable. I also cut the thumb groove with a dremel cutoff wheel.
I am still messing with the washers, they tend to slide when you fold it open.<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/IMG_1512_zpsebnvtk94.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/IMG_1512_zpsebnvtk94.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
It being shiny makes it a pain to photograph haha, but I am pretty happy with it. I made this so I can keep it in my camera bag at my high school. I run audio, lighting and do video and photo of around 3 public events, games, and shows a week with sometimes some really complex gear. I always find myself needing some pliers and sometimes screwdrivers, but I obviously can't carry anything with a blade being a student. With this I don't have to worry about what I take to shoots in different locations. Yes, I am getting everything cleared with written permission. This thread is about purely the technical side, no need to debate anything like that!Does anybody know about the washer positioning on the crunch? I have photos of the before spacing, but not orientation. They rotate as you unfold a tool, but they way I have them makes sense to me.
Thanks guys!
-
Nice work Shawn!
Oh and that garage setup is sweet too...wish I had some of your tools

-
Looking good Shawn.
Click the pic for a bigger version if needed.<a href="https://flic.kr/p/rZZSCY" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7721/17065251200_0fbeca46b2.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
@babola said:
Nice work Shawn!Oh and that garage setup is sweet too...wish I had some of your tools

Thanks! And you would be surprised what you can find on craigslist if you have the space. I found every tool pictured for $50 or less never more than a half hours drive, except the drill press which was $75. It takes time to fix them up but I learn tons and it is worth it!
<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/IMG_0011_zps60e2cfe4.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/IMG_0011_zps60e2cfe4.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s48.photobucket.com/user/Shawn_Cimonetti/media/IMG_1417_zpsjwhfwcy9.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i48.photobucket.com/albums/f218/Shawn_Cimonetti/IMG_1417_zpsjwhfwcy9.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
@zoidberg said:
Looking good Shawn.
Click the pic for a bigger version if needed.<a href="https://flic.kr/p/rZZSCY" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7721/17065251200_0fbeca46b2.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
You're a lifesaver! I will check but I think I have them upside down.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
