firearms
-
No worries, I had a good laugh about it also. Can't blame the cat. After I looked at it, I thought to myself...it does look like kitty litter.

-
So...that's how smurfty reloads happen..... ???
-
Well the fun continues.
I want the press in my gun room as it is one of the few locking interior doors in the house. I was going to put it upstairs, but it is like a hundred degrees up there.
So begins the movement of 2 lockers. I finally got to this configuration which allows me easy access to everything.
I have been looking for the sturdiest piece of furniture I had upstairs, and came up with this very sturdy and well made printer stand. I was using it for printer paper storage...but I think it has potential for the press. I plan on bolting it to the rear wall for added stability. It also has plenty of storage underneath for powder and other items.
The issue is one of height. The printer stand is only 22 inches high. I can order a Dillon strong mount which will raise that 8 1/2 inches more. Once I got that in there, I think I will definitely have to go that route.
So what do you guys think...is it feasible?
-
You might get a fire-proof chest for the powder, and mount the stand on top of that.
-
If that's a laminated board printer stand it may not be sturdy enough. The the mounting surface will have to withstand stresses throughout the stroke of the press lever. That means from several directions...pull down,, pull back up etc. I say this because full length resizing sometimes takes some force to accomplish which might loosen that top. Those stands are designed to hold weight but maybe not omnidirectional stresses on the top The rule of thumb is to mount the press on a a very heavy, solid surface....or at least it was 30 years ago. ColoSwiss' idea might be better...those cabinets are pretty sturdy but take care about storing the powder so close to a tube of live primers...I had a friend that did custom and bulk reloads for a living...his primer feed tube detonated and he had a bunch of small holes in the ceiling where the primers exited the tube. His powder was in a cabinet across the room. Again..all my reloading experience is 30+ years old.
A quick google lends good reading:
How Bad - Primer Explosion
http://www.calguns.net/calgunforum/showthread.php?t=233739 -
@SAK Guy said:
If that's a laminated board printer stand it may not be sturdy enough. The the mounting surface will have to withstand stresses throughout the stroke of the press lever. That means from several directions...pull down,, pull back up etc. I say this because full length resizing sometimes takes some force to accomplish which might loosen that top. Those stands are designed to hold weight but maybe not omnidirectional stresses on the top The rule of thumb is to mount the press on a a very heavy, solid surface....or at least it was 30 years ago. ColoSwiss' idea might be better...those cabinets are pretty sturdy but take care about storing the powder so close to a tube of live primers...I had a friend that did custom and bulk reloads for a living...his primer feed tube detonated and he had a bunch of small holes in the ceiling where the primers exited the tube. His powder was in a cabinet across the room. Again..all my reloading experience is 30+ years old.A quick google lends good reading:
How Bad - Primer Explosion
http://www.calguns.net/calgunforum/showthread.php?t=233739Agreed. You need a very solid base to base mount your press onto. I've been reloading for 39 years if my memory has not failed me. :)
-
Got it.
Hmmm...I just did a google search for reloading benches, and it looks like quite a few folks use a Black and Decker Workmate for a portable solution. Now that has got me thinking.

-
I have mine mounted on a "grinder stand" I got from Harbor Freight.
I used the Lee Bench Plate
-
-
Love gun shows. So many "dealers" who don't know what they have. I got my Martini-Henry at a show for $275.... >:D
-
That was my first one. I am sure it was a small one compared to what some of you attend. It mostly consisted of 3 large rooms at the Rod and Gun club.
Inside the archery range was a knife seller from Sudbury. I stayed away as I quickly noted that some of the items they were selling were definite fakes being sold at full retail. Once I saw that I didn't want to buy anything from them. The local gun shop was also there with a good variety of rifles.
Downstairs in the indoor pistol range, a variety of vendors were present. Nothing all that exciting. It ranged from rifles, shotguns, and some reloading supplies. I was most interested in the reloading stuff, but quickly found out there was nothing for my machine, or for 9mm as far as that went. I did find a few gems here however.
Things like these Leatherman 25th Anniversary pins.

I also found this used Wenger Esquire with the Bell Yellowpage phone book logo for 2 bucks.

A Spyderco something or other. Not even sure if it is a real one. Paid 3 bucks for this little knife.

I was about to leave and see some of the outdoor events, but something made me do a second round. At one of the tables I spied a SOG MT. I did a double take as it was a nice Tini one. I looked at the price and bought it on the spot. I paid 45 for it. The guy who sold it to me said he had bought it years ago and never used it. Yes, I found a Tini SOG Power Plier.


He was right, brand spanking new.

After that purchase, and a few freebies thrown in for good measure from some of the companies involved, I went outside to see what was going on. They had an archery pit where people could try out a bow, a handgun location, as well as skeet, shotgun, and the rifle section where you could try out a 50 caliber rifle. You had to pay to try them out...and I always wanted to try a .45 1911, and that 50 caliber rifle, well I wasn't expecting that...but if the opportunity presents itself...one must take that opportunity up, and right quick at that!. I am sorry I tried that 1911, because I like the feel of it a little too much. I found it to be very comparable to my 9mm for recoil...and I imagine it is due to the 1911 being an all metal gun and therefore absorbs the recoil a lot better than my 9mm which is half polymer. The 40 Glock I tried was a lot worse then the 1911. I now know what people mean when they say that the 1911 just points naturally. I got to shoot a metal target that spins around on its axis. I missed once, but that 1911 just shot where I pointed it. Very nice.
The 50 was just visceral. I mean, it assaults your senses. It wasn't bad for recoil...but I shot this thing in a covered shooting gallery. The back blast was felt more than anything else. The noise was something also...but now I can say I shot a 50 caliber single shot rifle.
A good day all in all.
-
Still working on a reloading table concept. It has to fit the space, which is limiting.
I went out and bought one of these, and a few pieces of 2"x 10" Pine. Still thinking about this...but here is a somewhat mock up.
Or I could always clamp one of these boards on top of the previously mentioned printer stand.

-
Gun shows can be bad for the wallet. :D Glad you had a good time.
Your S&W has a grip angle similar to the 1911, so it feels like what you're used to. Generations of shooters who grew up on revolvers hated the 1911. All what you're used to.
If you're looking for a steel-framed auto, but don't want to go to another cartridge, check out the Browning Hi-Power and CZ 75. The aluminum framed Beretta M-92 also has a bit more heft. The Browning and CZ can also be had with adjustable sights. My personal choice would be the CZ for a variety of reasons including value for the buck.
S&W M&P - 24 oz
Colt 1911 - 39 oz
Browning Hi-Power - 32 oz
CZ 75 - 35 oz
Beretta M92 - 33 oz -
Dan sounds like you had a good time at the gun show. I cant imagin shooting a 50 in a covered gallery. I've only shot them in a open field and the concussion and blast from that beast will get your attenion right now! :D A 1st Gen. Spyderco Ladybug and a 2nd V PowerPlier in TiNi good haul there. :)
-
Thanks David. Good to know I have a first gen Spyderco Ladybug. As for that SOG, I was very lucky. :)
-
-
You're in business!!

-
Nice
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




