firearms
-
Thanks David. Good to know I have a first gen Spyderco Ladybug. As for that SOG, I was very lucky. :)
-
-
You're in business!!

-
Nice
-
Got a problem. Sick and at home. Figured I may as well play with this and see if I can make a few new bullets.
Noticed right off the bat that my electronic scale which is accurate to 0.1 g will only show on the display down to 1.5 grains. Ok...but it get worse. The grain display will not show to the nearest 10th. Thus I am stuck at 4 grains, 5 grains, 6 grains, etc.

So much for accuracy. Guess I will have to find myself down to the gun shop and try to get something more accurate.
So what I did was to switch everything to grams and did this conversion:
1 grains = 0.06479891 gram
My chart shows that for a 125 grain bullet (mine are 124 grains), I need 4.8 grains of HP-38 powder.
So I calculated 4.8 grains x 0.06479891 grams = 0.311034 grams. I weighed my empty casing, and adjusted the machine to add only .3 more grams to the overall bullet weight.
Do you think I may be good? I think I should probably get a better scale. Less chance to make mistakes. I have made one bullet with a live primer...and stopped for now.
-
I would NOT make things more complicated by doing conversions and possible guess work. Get the scale you need and do not load until you do. Its not worth blowing up your gun and injuring yourself.
-
Seemed like the most prudent thing to do. I didn't realize the limitations of that electronic scale until I tried to measure 4.8 grains of powder. Guess I will have to buy one of those balance scales after all. As for making the one bullet, I was curious to see the whole process in its entirety.

-
I'm still using a balance beam type. It's slow, but if you are using it to verify the powder measure output, it's not a bad choice. If I were to get an electronic measure, I'd make sure and read as much as you can and reviews on them. Midway has lots to choose from. I would also prefer one with a calibration weight.
-
The word "gunpowder" and the phrase "about right" probably don't go well together. :-\
-
Yep. Fixed that issue rather quickly. Now i have something with a bit more accuracy.
Also got a tool designed to separate bullet and powder from casing. I already used it once...and I can tell you, it is a bit counter intuitive to smack this against a hard surface with all your might while holding a live bullet. It does work well though. I took apart that first bullet I made with 6 hits of the hammer. :ahhh :D
-
Very nice. If it's worth doing, it's worth doing right.

-
Got out shooting yesterday but the weather did not cooperate at all. Windy and wet which do not go along well with .22lr one bit.
Here is a picture of my rifle.

Been almost three years since I have shot this rifle because of the move to Texas and the stupid Global War on Terror so you have to cut me a break about this target. The first row was shot at about 9X and everything was going well. After reloading I decided to turn it up to 14X and everything became super blurry. Was running out of time before the range closed so I just went with it and as you can see it did not work out to well. Still glad to be out shooting at paper targets again so all in all a good day.

Remembered today while I was cleaning my rifle that the focus is on the very front of this scope. Sigh.
-
Nasty weather mate. :( Mind if I ask what distance you were shooting at?
-
Good shootin' Harley!

-
I am looking at that target, and I am thinking to myself...self...that is some good shooting. Hope I can reach that level some day.

-
-
@HarleyXJGuy said:
Got out shooting yesterday but the weather did not cooperate at all. Windy and wet which do not go along well with .22lr one bit.Here is a picture of my rifle.

Been almost three years since I have shot this rifle because of the move to Texas and the stupid Global War on Terror so you have to cut me a break about this target. The first row was shot at about 9X and everything was going well. After reloading I decided to turn it up to 14X and everything became super blurry. Was running out of time before the range closed so I just went with it and as you can see it did not work out to well. Still glad to be out shooting at paper targets again so all in all a good day.

Remembered today while I was cleaning my rifle that the focus is on the very front of this scope. Sigh.
Not bad for a beginner, I guess. :D
-
Oh great...now you are telling me it will take decades to reach that level.
:D -
Got out shooting yesterday but the weather did not cooperate at all. Windy and wet which do not go along well with .22lr one bit.
Here is a picture of my rifle.

Been almost three years since I have shot this rifle because of the move to Texas and the stupid Global War on Terror so you have to cut me a break about this target. The first row was shot at about 9X and everything was going well. After reloading I decided to turn it up to 14X and everything became super blurry. Was running out of time before the range closed so I just went with it and as you can see it did not work out to well. Still glad to be out shooting at paper targets again so all in all a good day.

Remembered today while I was cleaning my rifle that the focus is on the very front of this scope. Sigh.
Not bad for a beginner, I guess. :D
Oh now it was very bad but I will get it sorted.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


