Leatherman quality control.
-
I don't know where you get your prices, but a lot of places charge retail which is too high for an unchecked tool*
I think it's absolutely appalling that LM is selling for such high prices overseas where the poor customer is likely to get a poor/bad tool. Down right dispickable if you ask me.
Furthermore, if they put half as much effort into ensuring a proper tool as they do into making sure none-shall-enter their theft-proof packing, we wouldn't be having this discussion.
- unchecked tool - a tool with no QC or oversite before going on to packaging.
I just can't see the sense in ordering a NIP Leatherman product anymore. It's a gamble you will get a tool you're satisfied with. I'm not sure their prices are high, but it's absolutely clear their quality is diminished, so arguing that point is almost nonsense anymore. I will say that if the $120 MSRP on their new toy whistle is an indicator, they are clearly headed in the wrong direction with their foot on the gas......
Sent from my iPhone using Tapatalk
They are overpriced. $50 for a skeletool, $90 for a wave where I'm at. To me that's a bit much. Although the rebar is available for 55 which is nice. As far as quality control goes I don't like them giving refurbed tools for warranty. Sent some tools to Gerber and they sent nib tools back to me. I got two bad waves from LM and decided it wasn't worth sending one in for a third. I agree with lynn, Leatherman is a few steps behind Victorinox in the qc department, but they are ahead of their competitors in terms of options.
I would not pay $55 for a Rebar. I know the overseas members would love a Rebar for $55, but when they came out they were $35-$40. Waves used to be $55-$60 on Amazon all day. Cheaper if they were on sale.
-
@captain spaulding said:
I don't know where you get your prices, but a lot of places charge retail which is too high for an unchecked tool*
I think it's absolutely appalling that LM is selling for such high prices overseas where the poor customer is likely to get a poor/bad tool. Down right dispickable if you ask me.
Furthermore, if they put half as much effort into ensuring a proper tool as they do into making sure none-shall-enter their theft-proof packing, we wouldn't be having this discussion.
- unchecked tool - a tool with no QC or oversite before going on to packaging.
I just can't see the sense in ordering a NIP Leatherman product anymore. It's a gamble you will get a tool you're satisfied with. I'm not sure their prices are high, but it's absolutely clear their quality is diminished, so arguing that point is almost nonsense anymore. I will say that if the $120 MSRP on their new toy whistle is an indicator, they are clearly headed in the wrong direction with their foot on the gas......
Sent from my iPhone using Tapatalk
They are overpriced. $50 for a skeletool, $90 for a wave where I'm at. To me that's a bit much. Although the rebar is available for 55 which is nice. As far as quality control goes I don't like them giving refurbed tools for warranty. Sent some tools to Gerber and they sent nib tools back to me. I got two bad waves from LM and decided it wasn't worth sending one in for a third. I agree with lynn, Leatherman is a few steps behind Victorinox in the qc department, but they are ahead of their competitors in terms of options.
I would not pay $55 for a Rebar. I know the overseas members would love a Rebar for $55, but when they came out they were $35-$40. Waves used to be $55-$60 on Amazon all day. Cheaper if they were on sale.
I didn't know they were that cheap. What is driving their prices up? How much is a rebar in the uk?
-
@captain spaulding said:
[quote author=sawman link=topic=52451.msg1091864#msg1091864 date=1432224176]
I don't know where you get your prices, but a lot of places charge retail which is too high for an unchecked tool*I think it's absolutely appalling that LM is selling for such high prices overseas where the poor customer is likely to get a poor/bad tool. Down right dispickable if you ask me.
Furthermore, if they put half as much effort into ensuring a proper tool as they do into making sure none-shall-enter their theft-proof packing, we wouldn't be having this discussion.
- unchecked tool - a tool with no QC or oversite before going on to packaging.
I just can't see the sense in ordering a NIP Leatherman product anymore. It's a gamble you will get a tool you're satisfied with. I'm not sure their prices are high, but it's absolutely clear their quality is diminished, so arguing that point is almost nonsense anymore. I will say that if the $120 MSRP on their new toy whistle is an indicator, they are clearly headed in the wrong direction with their foot on the gas......
Sent from my iPhone using Tapatalk
They are overpriced. $50 for a skeletool, $90 for a wave where I'm at. To me that's a bit much. Although the rebar is available for 55 which is nice. As far as quality control goes I don't like them giving refurbed tools for warranty. Sent some tools to Gerber and they sent nib tools back to me. I got two bad waves from LM and decided it wasn't worth sending one in for a third. I agree with lynn, Leatherman is a few steps behind Victorinox in the qc department, but they are ahead of their competitors in terms of options.
I would not pay $55 for a Rebar. I know the overseas members would love a Rebar for $55, but when they came out they were $35-$40. Waves used to be $55-$60 on Amazon all day. Cheaper if they were on sale.
I didn't know they were that cheap. What is driving their prices up? How much is a rebar in the uk?
[/quote]Probably Leatherman losing money on their other models that don't sell well so they have to make it up by reaching in your pocket.

In all seriousness i'm not sure.
-
@captain spaulding said:
@captain spaulding said:
[quote author=BASguy link=topic=52451.msg1092154#msg1092154 date=1432258685]
[quote author=sawman link=topic=52451.msg1091864#msg1091864 date=1432224176]
I don't know where you get your prices, but a lot of places charge retail which is too high for an unchecked tool*I think it's absolutely appalling that LM is selling for such high prices overseas where the poor customer is likely to get a poor/bad tool. Down right dispickable if you ask me.
Furthermore, if they put half as much effort into ensuring a proper tool as they do into making sure none-shall-enter their theft-proof packing, we wouldn't be having this discussion.
- unchecked tool - a tool with no QC or oversite before going on to packaging.
I just can't see the sense in ordering a NIP Leatherman product anymore. It's a gamble you will get a tool you're satisfied with. I'm not sure their prices are high, but it's absolutely clear their quality is diminished, so arguing that point is almost nonsense anymore. I will say that if the $120 MSRP on their new toy whistle is an indicator, they are clearly headed in the wrong direction with their foot on the gas......
Sent from my iPhone using Tapatalk
They are overpriced. $50 for a skeletool, $90 for a wave where I'm at. To me that's a bit much. Although the rebar is available for 55 which is nice. As far as quality control goes I don't like them giving refurbed tools for warranty. Sent some tools to Gerber and they sent nib tools back to me. I got two bad waves from LM and decided it wasn't worth sending one in for a third. I agree with lynn, Leatherman is a few steps behind Victorinox in the qc department, but they are ahead of their competitors in terms of options.
I would not pay $55 for a Rebar. I know the overseas members would love a Rebar for $55, but when they came out they were $35-$40. Waves used to be $55-$60 on Amazon all day. Cheaper if they were on sale.
I didn't know they were that cheap. What is driving their prices up? How much is a rebar in the uk?
[/quote]Probably Leatherman losing money on their other models that don't sell well so they have to make it up by reaching in your pocket.

In all seriousness i'm not sure.
[/quote]
Who knows...they could always outsource production to mars. They are trying to reach new markets. [emoji1] -
I just don't think (here in the land of the free anyway) that Leatherman is to overpriced on their tools, it's just that the prices have risen in recent years almost in proportion to the decline in quality.
Sent from my iPhone using Tapatalk
-
@BASguy said:
I just don't think (here in the land of the free anyway) that Leatherman is to overpriced on their tools, it's just that the prices have risen in recent years almost in proportion to the decline in quality.Sent from my iPhone using Tapatalk
That's the thing that really gets me. The quality declining while the price is rising. Makes me feel like I am getting shafted six ways from Sunday. Its not like the prices rose slightly either. $60 to $90 for a Wave is substantial. That's roughly a 30% or more increase (I think). I never was great at math.
-
I was about to say "The Wave doesn't cost $90."
But, my benchmark price for it, at Home Depot, yep. Wow. When the smurf did THAT happen?
I guess that shows how close i pay attention to retail prices of full size tools.

-
@Lynn LeFey said:
I was about to say "The Wave doesn't cost $90."But, my benchmark price for it, at Home Depot, yep. Wow. When the smurf did THAT happen?
I guess that shows how close i pay attention to retail prices of full size tools.

All of the Waves on Amazon are $90 as well. Kind of crazy. :ahhh :D
-
Here are some, cheap for me, prices from Austria, in some regular shops.
In many ways, with the dollar getting stronger, these prices may not appear as high, to US members as they actually are or "feel" to us lot.
-
A very interesting thread...
I think there is a fine line between trying new ideas and blatantly cost cutting.
I agree whole heartedly that the early LM's were something special. But I also think some of the later ideas....MUT, OHT should be applauded too.However, there is no denying that the overall quality has gone drastically downhill and it really does seem to be since Tim Leatherman left the driving seat.
Hopefully when sales begin to fall on LM's new stuff maybe then Leatherman will realise their mistake.
Personally I couldn't care less, if they (Leatherman) or indeed any of the MT/SAK manufacturers want to churn out crap, then churn it out!!
I don't have to buy it......and I won't!! -
@tosh said:
A very interesting thread...I think there is a fine line between trying new ideas and blatantly cost cutting.
I agree whole heartedly that the early LM's were something special. But I also think some of the later ideas....MUT, OHT should be applauded too.However, there is no denying that the overall quality has gone drastically downhill and it really does seem to be since Tim Leatherman left the driving seat.
Hopefully when sales begin to fall on LM's new stuff maybe then Leatherman will realise their mistake.
Personally I couldn't care less, if they (Leatherman) or indeed any of the MT/SAK manufacturers want to churn out crap, then churn it out!!
I don't have to buy it......and I won't!!I don't care about the other the sport multi tools either. But i do think this idea will cost lm money. No skater will buy one. And it is too expensive.
It is the same with the MUT.
But i can see that the raptor is a good idea.Probably the reason why Vic doesn't make that kind of mt or saks.
I like the idea of don't have allot of options, but the options you have are prefect assembled and flawless qc over the loads of options but all poor quality.Dump all the BS MT s and focus on perfecting the wave and Supertool.
-
I found a perfect word to describe LM.
INCONSISTENT.
They will produce a complete work of genius like the Raptor, then turn around and produce the Rev which takes away the OHO and gives you a smurfty tool. And what's up with the watch tool (I forget right off what it's called) with the bracelet of bits. REDICULOUS!!!
-
@sawman said:
I found a perfect word to describe LM.INCONSISTENT.
They will produce a complete work of genius like the Raptor, then turn around and produce the Rev which takes away the OHO and gives you a smurfty tool. And what's up with the watch tool (I forget right off what it's called) with the bracelet of bits. REDICULOUS!!!
I think we are looking at a company that is trying to make more profit.
Tim leatherman idea was create good and affordable product, and create a good working environment and sustainable jobs.
And at the end cover all the costs.
Basically non-profit minded.Now we are throwing out the good affordable tools idea, and get more profit.
We are getting crapy quality tools, the workers at leatherman will probably not get an higher salary. But the management will get a better salary. -
I found a perfect word to describe LM.
INCONSISTENT.
They will produce a complete work of genius like the Raptor, then turn around and produce the Rev which takes away the OHO and gives you a smurfty tool. And what's up with the watch tool (I forget right off what it's called) with the bracelet of bits. REDICULOUS!!!
I think we are looking at a company that is trying to make more profit.
Tim leatherman idea was create good and affordable product, and create a good working environment and sustainable jobs.
And at the end cover all the costs.
Basically non-profit minded.Now we are throwing out the good affordable tools idea, and get more profit.
We are getting crapy quality tools, the workers at leatherman will probably not get an higher salary. But the management will get a better salary.If I didn't care about the future of LM, I suppose I wouldn't get so worked up about it. I sincerely hope they can get back on track. I love some of their products and don't want to see them go out of business.
-
I found a perfect word to describe LM.
INCONSISTENT.
They will produce a complete work of genius like the Raptor, then turn around and produce the Rev which takes away the OHO and gives you a smurfty tool. And what's up with the watch tool (I forget right off what it's called) with the bracelet of bits. REDICULOUS!!!
I think we are looking at a company that is trying to make more profit.
Tim leatherman idea was create good and affordable product, and create a good working environment and sustainable jobs.
And at the end cover all the costs.
Basically non-profit minded.Now we are throwing out the good affordable tools idea, and get more profit.
We are getting crapy quality tools, the workers at leatherman will probably not get an higher salary. But the management will get a better salary.If I didn't care about the future of LM, I suppose I wouldn't get so worked up about it. I sincerely hope they can get back on track. I love some of their products and don't want to see them go out of business.
I stand behind you.
I hate that i can not support and recommend a company that i love. -
@Lynn LeFey said:
I was about to say "The Wave doesn't cost $90."But, my benchmark price for it, at Home Depot, yep. Wow. When the smurf did THAT happen?
I guess that shows how close i pay attention to retail prices of full size tools.

I was curious as to why you didn't think price was an issue in your comments? Now it makes sense.....
Sent from my iPad using Tapatalk
-
[/quote]
Dump all the BS MT s and focus on perfecting the wave and Supertool.
[/quote]I'm not sure I'm on board with dump everything, but a strong focus on the 2 flagship offerings to bring them to a quality level on par with Vic would be a great idea.
Sent from my iPad using Tapatalk
-
I'm sure Leatherman must still have all the tooling for past classics.
Why don't they re-release??
Pretty sure the Genus, Sideclip & Minitool would still sell even today.
-
@50ft-trad said:
I've said plenty of times before, I have had more than my fair share of quality issues with Leatherman, and actually came to believe for a while that any "B Grade" goods in the factory were destined for overseas sale rather than rejected or rectified. These days I just think they're bloody sloppy ::) The first two tools I bought of theirs were unquestionably defective (not just design issues), and I have had others since then, and heard of plenty more.I DO NOT associate the brand name with a high quality reliable product!
I have several Leatherman tools that I own, like and use. These tend to be older models (from back when they cared about quality), or ones where I have done some modification. If I was to look for a new multitool for someone today the first brands I would consider are Victorinox and Gerber.
Victorinox does occasionally let the odd lemon out of the factory, but these are rare. Gerber are more hit and miss with their QA, probably on a par with Leatherman in my opinion, but their tools are often better priced, and generally offer better value for money in my opinion.** As for SOG, my current perspective is that the odds of them getting something right, is about on a par with the odds of Victorinox getting something wrong**.

SOG has really disappointed me lately, and by lately I mean the last few years. Their tools just don't do it for me. They seem to be entirely built around the compound leverage mechanism, and it's like they ran out of R&D money after they came up with that so the rest of the design was thrown together willy nilly.
-
@Mercury said:
SOG has really disappointed me lately, and by lately I mean the last few years. Their tools just don't do it for me. They seem to be entirely built around the compound leverage mechanism, and it's like they ran out of R&D money after they came up with that so the rest of the design was thrown together willy nilly.I was just telling my husband today that it feels to me like SOGs are incredibly well manufactured, and incredibly poorly designed, which is a bad combination. What's the point of flawless execution of poor design? And yes, I'm 100% with the notion that the compound leverage system is very well done. Then everything thing else falls to crap.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login