SOG Switch Plier 2.0
-
It hasn't been an everyday carry for me, but I've been using my SP2 on occasion over the last couple months. It hasn't failed, nor do I expect it to. The ground steel linkage pin (not cast like the SP1) seems to be plenty robust. And the frame is stamped steel of a proper thickness, not cast pot metal like the SP1. I can squeeze the plier handles with the full force of one hand and there is no give.
Another plus I've noted is the return-open spring on the plier jaws. Note this is not the spring that "launches" the plier head, this is the spring that returns the jaws to the open position after you let up on the handles. On my SP1, this spring is a bit lazy, and the jaws don't always open fully like they should. On the SP2, a larger "cloths pin" type spring is used, and the jaws open smartly when the handles are released. (You can see a portion of the cloths pin spring's arm in photos of the tool showing the side opposite the pocket clip.) I think the longer arms on the spring allow it to work better.
As regards the leverage, it is indeed 1 to 1, not compound. The gear-like "teeth" around the plier pivot area are evidently there only for appearance sake.
I have not tried substituting any other blades on mine, but they look to be standard SOG pattern, so mods should be easy.
Bob :)
-
Thanks for the info Bob!
Nate
That's us mobile -
Interesting review from Tool Guyd for the Switchplier. - http://toolguyd.com/sog-switchplier-2-multi-tool-week1-review/
-
@Yadda said:
Interesting review from Tool Guyd for the Switchplier. - http://toolguyd.com/sog-switchplier-2-multi-tool-week1-review/I don't know...
He's said a few things that are wrong (ie the pliers DON'T have to be deployed to open the the handle tools). But he may have a point about clumping, although I've never had much trouble with it. I would be pissed if I kept stabbing myself with the awl, so I'll be testing that for sure.
-
@Mr. Whippy said:
Interesting review from Tool Guyd for the Switchplier. - http://toolguyd.com/sog-switchplier-2-multi-tool-week1-review/
I don't know...
He's said a few things that are wrong (ie the pliers DON'T have to be deployed to open the the handle tools). But he may have a point about clumping, although I've never had much trouble with it. I would be pissed if I kept stabbing myself with the awl, so I'll be testing that for sure.
Allow me clarify this:
you can deploy the knife or file WITHOUT deploying the pliers, just lift the sliver handle up, pull out the tool and close handle after.The other internal tools all clump and started drive me nut after a while.
Closing the pliers is easy for me, push the button, close handle then close pliers, all can done done with one hand within 2 seconds.
-
Same as the original then :)
-
Here is my SP2.0 reconfigured :
From left to right, Knife blade, super thin washer, can opener, awl, spacer, Philips driver, bottler opener.In this configuration, the blade doesn't clump with other tools, other tools still clump but much less, tool access is much better.
I can pull out the knife, can opener, or bottle opener individuality without deploying the pliers.
The only tools I must fire the pliers to get to are awl and Philips driver.
-
Where can I get one? Niether Amazon nor Sog has it available. Has anyone ordered from this site before? http://m.academy.com/shop/pdp/sog-switchplier-2-0-multi-tool/pid-1504132?deviceType=true
-
@Demel said:
Where can I get one? Niether Amazon nor Sog has it available. Has anyone ordered from this site before? http://m.academy.com/shop/pdp/sog-switchplier-2-0-multi-tool/pid-1504132?deviceType=trueThat's where I bought mine. Very smooth transaction.
Still extremely happy with my SP 2.0, btw.

-
That's good to know. It seems they are the only ones who have it in stock. What's going on with Sog. I will be ordering one. Thanks again
-
@Mr. Whippy said:
Where can I get one? Niether Amazon nor Sog has it available. Has anyone ordered from this site before? http://m.academy.com/shop/pdp/sog-switchplier-2-0-multi-tool/pid-1504132?deviceType=true
That's where I bought mine. Very smooth transaction.
Still extremely happy with my SP 2.0, btw.

Nate, Switchplier vs Minigrip.... thoughts? How do they stack up against one another?
-
Order is in. Can't wait

-
You will love it.
Nate
That's us mobile -
@50ft-trad said:
@Mr. Whippy said:
Where can I get one? Niether Amazon nor Sog has it available. Has anyone ordered from this site before? http://m.academy.com/shop/pdp/sog-switchplier-2-0-multi-tool/pid-1504132?deviceType=true
That's where I bought mine. Very smooth transaction.
Still extremely happy with my SP 2.0, btw.

Nate, Switchplier vs Minigrip.... thoughts? How do they stack up against one another?
The Minigrip still has the best pliers IMO because of the head shape, but the funky lock makes it pop open at inconvenient times. Also, the SOG just carries so well, that it makes up for the lack of OHO blades and fewer tools (compared to the LM Charge). If the pliers lock were better on the Minigrip, it would still edge out the SOG.
Basically, I rate them SOG > Minigrip 》Charge
-
Minigrip? Please educate me on what that is.
Edit: Nevermind found it
-
@Mr. Whippy said:
@50ft-trad said:
@Mr. Whippy said:
Where can I get one? Niether Amazon nor Sog has it available. Has anyone ordered from this site before? http://m.academy.com/shop/pdp/sog-switchplier-2-0-multi-tool/pid-1504132?deviceType=true
That's where I bought mine. Very smooth transaction.
Still extremely happy with my SP 2.0, btw.

Nate, Switchplier vs Minigrip.... thoughts? How do they stack up against one another?
The Minigrip still has the best pliers IMO because of the head shape, but the funky lock makes it pop open at inconvenient times. Also, the SOG just carries so well, that it makes up for the lack of OHO blades and fewer tools (compared to the LM Charge). If the pliers lock were better on the Minigrip, it would still edge out the SOG.
Basically, I rate them SOG > Minigrip 》Charge
Thanks Nate

-
Got it today. will put it in the ring and see how she holds up. First impression: very compact, light weight, and awesome tool set, I just wish it had scissors. Otherwise it's a good start.
-
@Demel said:
Got it today. will put it in the ring and see how she holds up. First impression: very compact, light weight, and awesome tool set, I just wish it had scissors. Otherwise it's a good start.The first one could take scissors (I've fitted SOG scissors in mine) so there's no reason that I can see why you can't fit them in this. Remember, they are meant to be customised without voiding warranty, and the scissors are available as an aftermarket addition from SOG or dealers
-
The switchplier has been with me the last couple days and seen much variety. Yesterday she helped me with change my brakes, used while wearing gloves, rode in jeans and sweatpants (carried well in btw), went to work with me today, cut stranded and solid wire, used the blade and awl for light task, pliers feel really good to use thanks to being spring loaded. I must say this is a very good tool.
The main "flaw" I have is a good and bad thing. The plastic may or may not hold up in time, but it does make the tool much lighter. The wire cutters work better on solid wire but struggle with stranded wire. Compound leverage would've been nice, but you can't have it all. Thus, the cutters work when need but are not the best in the league. Once I replace the file with scissors, this will be a good urban carry tool. After the last couple days the switchplier has definatly earned a spot in my collection [emoji41]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

