SOG Switch Plier 2.0
-
Does anyone think the sp2 will be the new candidate for a good bladeless mt? Replacing blade and can opener with scissors maybe? Or swapping the blade for a saw?
-
@Demel said:
Does anyone think the sp2 will be the new candidate for a good bladeless mt? Replacing blade and can opener with scissors maybe? Or swapping the blade for a saw?I think the jury is still out on how strong the pin is that operates the pliers jaw in the SP2 - it was definitely a weakness in the original SwitchPlier.
-
@gregozedobe said:
If the SP2 uses the same mechanism as the orginal SP it doesn't have gears. It may or may not have "compound leverage" depending on the relative distances from their respective pivots of the pin on the plier jaws and the slot in the handle that works on the pin.If the pin is closer to its pivot than the slot is to its pivot, then a large movement of the handle will give a smaller movement of the jaw (and therefore a stronger grip on whatever is being gripped), which would fit my definition of "compound leverage".
If you look at the photos (of a dismantled orginal SP) in this post it looks like they are different distances from their respective pivots:
</post/1026963>
SOG's claims on their website, and put forward in their sales bumph, says this has SOG's patented compound leverage, but it clearly does not. They have made it look like it might with the gear effect at the pivot end, but there is no gearing in play. If you look at the angle of the pliers head when open, and remember that the handles will still be partially open when those pliers close, it's pretty clear to me that the degree of travel of both pliers and handles will be the same. No compound leverage!
Quality wise, SOG have been on a decline for anumber of years. Multitools, fixed blade knives, the Powerduo, all of which have hurt their reputation in my eyes. I would like to think this is the first step of them getting their act together, but the clear error/lie about the compound leverage makes me think otherwise.
They have a lot of work to do before they regain my trust in the brand
-
New keychain fake!:


-
I just confirmed with SOG that the SP2 does NOT feature compound leverage. Just a misprint on the website.
-
Good to know. I still really want one. Sadly I am not sure now if I will be able to get one this payday.
Nate
That's us mobile -
It hasn't been an everyday carry for me, but I've been using my SP2 on occasion over the last couple months. It hasn't failed, nor do I expect it to. The ground steel linkage pin (not cast like the SP1) seems to be plenty robust. And the frame is stamped steel of a proper thickness, not cast pot metal like the SP1. I can squeeze the plier handles with the full force of one hand and there is no give.
Another plus I've noted is the return-open spring on the plier jaws. Note this is not the spring that "launches" the plier head, this is the spring that returns the jaws to the open position after you let up on the handles. On my SP1, this spring is a bit lazy, and the jaws don't always open fully like they should. On the SP2, a larger "cloths pin" type spring is used, and the jaws open smartly when the handles are released. (You can see a portion of the cloths pin spring's arm in photos of the tool showing the side opposite the pocket clip.) I think the longer arms on the spring allow it to work better.
As regards the leverage, it is indeed 1 to 1, not compound. The gear-like "teeth" around the plier pivot area are evidently there only for appearance sake.
I have not tried substituting any other blades on mine, but they look to be standard SOG pattern, so mods should be easy.
Bob :)
-
Thanks for the info Bob!
Nate
That's us mobile -
Interesting review from Tool Guyd for the Switchplier. - http://toolguyd.com/sog-switchplier-2-multi-tool-week1-review/
-
@Yadda said:
Interesting review from Tool Guyd for the Switchplier. - http://toolguyd.com/sog-switchplier-2-multi-tool-week1-review/I don't know...
He's said a few things that are wrong (ie the pliers DON'T have to be deployed to open the the handle tools). But he may have a point about clumping, although I've never had much trouble with it. I would be pissed if I kept stabbing myself with the awl, so I'll be testing that for sure.
-
@Mr. Whippy said:
Interesting review from Tool Guyd for the Switchplier. - http://toolguyd.com/sog-switchplier-2-multi-tool-week1-review/
I don't know...
He's said a few things that are wrong (ie the pliers DON'T have to be deployed to open the the handle tools). But he may have a point about clumping, although I've never had much trouble with it. I would be pissed if I kept stabbing myself with the awl, so I'll be testing that for sure.
Allow me clarify this:
you can deploy the knife or file WITHOUT deploying the pliers, just lift the sliver handle up, pull out the tool and close handle after.The other internal tools all clump and started drive me nut after a while.
Closing the pliers is easy for me, push the button, close handle then close pliers, all can done done with one hand within 2 seconds.
-
Same as the original then :)
-
Here is my SP2.0 reconfigured :
From left to right, Knife blade, super thin washer, can opener, awl, spacer, Philips driver, bottler opener.In this configuration, the blade doesn't clump with other tools, other tools still clump but much less, tool access is much better.
I can pull out the knife, can opener, or bottle opener individuality without deploying the pliers.
The only tools I must fire the pliers to get to are awl and Philips driver.
-
Where can I get one? Niether Amazon nor Sog has it available. Has anyone ordered from this site before? http://m.academy.com/shop/pdp/sog-switchplier-2-0-multi-tool/pid-1504132?deviceType=true
-
@Demel said:
Where can I get one? Niether Amazon nor Sog has it available. Has anyone ordered from this site before? http://m.academy.com/shop/pdp/sog-switchplier-2-0-multi-tool/pid-1504132?deviceType=trueThat's where I bought mine. Very smooth transaction.
Still extremely happy with my SP 2.0, btw.

-
That's good to know. It seems they are the only ones who have it in stock. What's going on with Sog. I will be ordering one. Thanks again
-
@Mr. Whippy said:
Where can I get one? Niether Amazon nor Sog has it available. Has anyone ordered from this site before? http://m.academy.com/shop/pdp/sog-switchplier-2-0-multi-tool/pid-1504132?deviceType=true
That's where I bought mine. Very smooth transaction.
Still extremely happy with my SP 2.0, btw.

Nate, Switchplier vs Minigrip.... thoughts? How do they stack up against one another?
-
Order is in. Can't wait

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

