Leatherman leather sheaths
-
The old square style is nice, but it also manages to wear out- I have known a few people who made new sheaths after the old ones gave up the ghost. Since it's a fairly simple design though, they were able to copy it pretty closely without a problem.
The newer ones that come with the Charge series I find to be really good:

I like the elastic side panels which allow it to hold a tool snugly whether you are carrying a bit set or not.
I'm NOT a fan of the "leather plywood" sheaths offered with the Kick, Blast and Fuse.

The one size fits none type sheath strikes me as a good way to lose your tool, but I'll bet the price is right on them.
Def
-
The old Sheaths for me are better bar none
but I haven't had any problems with the leather sheath on my Blast :) you can tell it is of lesser quality but it works for me. I also like the nylon sheath of the Wave which is a good alteranative to the leather ones ;) :D -
@Poncho65 said:
The old Sheaths for me are better bar none
but I haven't had any problems with the leather sheath on my Blast :) you can tell it is of lesser quality but it works for me. I also like the nylon sheath of the Wave which is a good alteranative to the leather ones ;) :DNot too sure about that, IMHO, simply because I carried the Wave with a clip for about 3 weeks, and before that I carried it in the nylon sheath for a month, and it is in the nylon sheath on my side right now, which makes about week 5 of sheath and the velcro on mine is starting to give out already. I know a guy at work who has the leather one and he said he likes his because of the snap button, and he said the leather just seems more durable, plus he has had it for 3 years now. It has signs of use obviously, but it is still in good shape, so if something should happen to the replacement clip they are sending me, than I will look into buying a leather sheath.
Also, if anyone has a Wave or Charge sheath they don't want, I would be willing to trade one for a brand new ballistic nylon sheath.
Only negative things I have heard about the leather sheath is when they are brand new they are hard to fit a belt through, but work great. I have also heard that the leather sheath is bad about jabbing you in the side if you carry vertical, but I have really taken a liking to carrying horizontal. Allows for more concealed carry and I can still get in my pockets easily.
-
In all honesty though, I think they should make the nylon sheath available in both velcro and snap button. I would love the nylon sheath much better if it had a snap button, because to me the velcro wears out in no time.
-
I love the simpleness of the old sheaths, they are barely bigger than the tool itself. For me that's the ideal.
If anyone has another old PST type sheath for sale please let me know. -
@jdailey4206966 said:
Not too sure about that, IMHO, simply because I carried the Wave with a clip for about 3 weeks, and before that I carried it in the nylon sheath for a month, and it is in the nylon sheath on my side right now, which makes about week 5 of sheath and the velcro on mine is starting to give out already. I know a guy at work who has the leather one and he said he likes his because of the snap button, and he said the leather just seems more durable, plus he has had it for 3 years now. It has signs of use obviously, but it is still in good shape, so if something should happen to the replacement clip they are sending me, than I will look into buying a leather sheath.Also, if anyone has a Wave or Charge sheath they don't want, I would be willing to trade one for a brand new ballistic nylon sheath.
Only negative things I have heard about the leather sheath is when they are brand new they are hard to fit a belt through, but work great. I have also heard that the leather sheath is bad about jabbing you in the side if you carry vertical, but I have really taken a liking to carrying horizontal. Allows for more concealed carry and I can still get in my pockets easily.
coming from the man who has broken the eyeglass bit and pocket clip ::) I've had nylon sheaths with velcro outlast leather because the snaps fail, that could be because I am around a lot of dust and mortar though
I think both have pros and cons :) which is my opinion -
@appletree_man said:
Just got my first old style sheath, what a difference between these and the crappy current lot.
Has Leatherman ever commented on the new sheaths, perhaps tried to defend the decision to change them ? I'd gladly pay extra for the old style.I just posted this on the Trade forums thread:
*That's certainly the one I was on about on the Crunch thread ATM. I looked afterwards and I have that style of sheath for the PST / PST II, Flair, Crunch, Supertool and another one which I can't tie up to a tool at the moment......
For me, it would be hard to better. FWIW, there's plenty of these on ebay, but try to make sure that it has "Leatherman" stamped on the brass press-stud though. I bought a bunch of them without the stamp a while back, and when they arrived they were not quite as good as the factory supplied ones. They may be knock-offs, as the quality of the Leatherman name on the front is not as crisp, the overall quality is inferior and there is blue oxide forming on some of the rivets. They're still servicable, but nowhere near the quality of the real thing!*
-
@DaveK said:
but try to make sure that it has "Leatherman" stamped on the brass press-stud though.I have a PST leather sheath that came with the PST it is 14 years old and it doesn't have the LM stamp on the stud, but the words are crisp and it's not forming any blue oxide either.
Hope I don't end up buying a knock-off didn't know there was a difference thanks
:D -
Well it's my assumption that they were knock-offs - they could be seconds / rejects I suppose.
All of mine (bar the above) have the stamped press stud, but it sounds like LM may have made some like that after all.
-
I'm with Def, I like the Charge leather sheaths a lot.. They are very high quality!
-
@Poncho65 said:
coming from the man who has broken the eyeglass bit and pocket clip ::) I've had nylon sheaths with velcro outlast leather because the snaps fail, that could be because I am around a lot of dust and mortar though
I think both have pros and cons :) which is my opinionWell, the pocket clip thing is beyond me, but the screw driver bit was dropped I can admit too that. I think probably because I use the tool so much throughout the day and the sheath gets opened and closed so much thats why.
-
@jdailey4206966 said:
Well, the pocket clip thing is beyond me, but the screw driver bit was dropped I can admit too that. I think probably because I use the tool so much throughout the day and the sheath gets opened and closed so much thats why.We could just go and do like Def and LM123 suggest and get the Charge sheath for our Waves :D I think that both the leather and nylon are nice looking and both have extra pockets ;)
-
-
A noob's perspective:
I just got my 1st LM - a new Charge AL with the leather sheath shown above in Def's post (since the new guy didn't get the free kwakster beauty ??? ). I'm coming from using Gerber MT's in their velcro-flap nylon sheaths. I'm not happy at all with the kung-fu death grip the elastic sides on this sheath have on the tool. It almost takes a two-handed extraction to get the tool out of the sheath! And the problem is made worse by keeping the extra bits in the back slot, which are part of the reason I went this direction in the first place - to have extra the bits handy.Seems to me that the tool should be easily removed from the sheath once the flap is unsnapped - I've been shopping around for a looser fitting sheath for this...maybe going back to a nylon one, or even a molle version, but that's not really practical for my EDC needs...
-RenHoek
-
Mine was the same at first, but the sheath will loosen up quite quickly Renhoek - stick with it.
In mine I EDC my Charge, a mini-Maglite in one of the elasticated side compartments, and a Fisher Space pen in the other. I also carry the bit-kit in the back and I can get the MT out really easily now.
-
I found an old Leatherman sheath - one of the ones with "Leatherman" in gold lettering diagonally across it
It is slightly larger than a PST sheath in all dimensions, though unlike the PST sheath, which has sides that go all the way to the top and the flap secures with no gaps, this one has a big ol' space so you can
A. See the tool from the side
&
B, probably easier to grab the tool.I estimate it's age at around 2002/2003 (the date on my PST that has a similar style sheath)
Presumably it is for a Supertool, as I'm told the early wave sheaths were straight up fancy.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




