Official Fidget Thread! Pics Encouraged!
-
I occasionally spin a pen or pencil but I used to be much better at it.
I too seem to have lost the ability to do this properly

Well we went all digital at work two years ago and I don't even have to sign my name anymore on any documents, everything is signed digitally so as anything you don't do often, you get out of practice with it.
yeah, still though, I miss it. it was fun, and cool 8)
-
Still enjoying my keychain fidget.
I've found out that if I have it in my right hand while driving I almost never change the song on the radio.
I used to have a pretty bad habit of clicking to the next song just to do something.

-
We talked recently about the official Greek fidgets, komboloi(a)

-
LOOKY WHAT I FOUND

-
Finally came in! It took awhile but it sure is fun! It also lays flat! As soon as I find out how to post a video, I will....


-
Le bump
-
Where is that vid at?

-
I use my SAK baton toothpicks.
-
I actually ended up making a fidget, due to this thread - just 2 chain links connected (4 posts in total equals 2 links, right?). Not much movement in it, but I couldn't remember the design of the fidget in the first post; got a project for tomorrow now. Might even look into making that other one as well, the one with two keyrings and two links.
Ohh, btw... That Polar pen? I want it!
Looks awesome and I love playing with magnets. -
Bringing this topic back from the dead!

I've also been bitten by the hand spinning tops bug. :ahhh :ahhh
Here are my attempts at making one.
1st prototype, more of a proof of concept.
I remembered I had some worn derailleur pulleys, and decided to try and make something out of them.
Cleaned them up, degreased them, and gave them a spin... That was a bust! The ball bearings had bits of rust so, I extracted the bearings from the pulleys, bought a cheap bearing, degreased it, and glued the 3 bearings together with super glue. It worked out nicely but it just spins for a few seconds...

I am now working on my 2nd prototype.
Bought 5 bearings, 1 good quality one and 4 cheap ones to use as weights.
Again, degreased the bearing, and this time, I'm putting them together with screws between 2 layers of 0.5mm carbon fiber sheet.
This one is still a work in progress, and will look a bet better once finished.


I'll update you guys once I finish it.
-
Here it is! V2 is finished... mostly...
It spins much better than V1, but, as it was made without any precision tools, it's not perfectly balanced. Overall, I'm very happy with the result.
Also, I learned something in the process... rubbing alcohol and plexiglass don't go well together. It's cracked allover, but it's a nice effect. I'll have to make new thumb rests.(here you can see the thumb rests without any problem)


(here, after cleaning it with rubbing alcohol, the thumb rests are all cracked up)



-
That is really cool!
I'd love to see a video of it in action!
Def
-
Maybe I'll make a video once I have more spinners to compare.
For now, a peak at the new prototype (still not the one that I really want, but that one will take a while)


Aluminum body, and thumb rests (not made yet)
-
@FInixNOver said:
Maybe I'll make a video once I have more spinners to compare.For now, a peak at the new prototype (still not the one that I really want, but that one will take a while)


Aluminum body, and thumb rests (not made yet)
Oooh cool. I just got a Vorso Flat Top the other day and I'm hooked on spinners now

-
Sweeeeeet! :D
Ive been spinning my pencil around my thumb for awhile now but it might be nice to break out the fidgets.
I saved the Bearing and Racer off the rear axle of my Duramax. It still spins great so I'd like to try and make something for it one day......because I don't have enough projects apparently
-
Maybe I'll make a video once I have more spinners to compare.
For now, a peak at the new prototype (still not the one that I really want, but that one will take a while)


Aluminum body, and thumb rests (not made yet)
Oooh cool. I just got a Vorso Flat Top the other day and I'm hooked on spinners now

The Vorso is awesome! The possibility to swap the bearing is genius!!
I just can justify spending 150+ euros it would take to get one. (I know they're sold out at their website, but there's a drop running over at massdrop for those that want to get one - $194.99 + shipping) -
Here it is completed.
Smaller footprint, and shorter spin times (there's a couple of reasons for this - read through). This is to be expected since I'm using steel bearings with steel cage, so there's quite a bit of friction.
One thing I found out is that I'm not using stainless steel bearings. I didn't know this at first, and removing the lubricant that they came with, turned out to be a bad idea.
I started noticing some grinding effect, and latter realized it was rust starting to form inside the bearing. So I can't have the bearing completely unlubricated, so I use a couple of drops of mineral oil, but this also adds to the friction, and shorter spinning times, however, it spins really smoothly.
Either way, it's not a big deal, since i find myself starting and stopping it mid spin. It's more about the fidgeting than the spin times.



-
I had to decommission the V2! :-
Was tying to make some improvements, or so I thought they would be, but I wasn't very successful...
Ended up taking to much material from the carbon fiber layers, and it had too much flex in the middle. Tried gluing the bearing to the CF, but that didn't solve the problem.So, I took it apart, and used most of it to make a new one.
Here it is, V2.1




-
I like this thread :)
RIP V2 - long live V2.1 :D
Is that carbon fibre in the last pic?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login