Official Fidget Thread! Pics Encouraged!
-
Le bump
-
Where is that vid at?

-
I use my SAK baton toothpicks.
-
I actually ended up making a fidget, due to this thread - just 2 chain links connected (4 posts in total equals 2 links, right?). Not much movement in it, but I couldn't remember the design of the fidget in the first post; got a project for tomorrow now. Might even look into making that other one as well, the one with two keyrings and two links.
Ohh, btw... That Polar pen? I want it!
Looks awesome and I love playing with magnets. -
Bringing this topic back from the dead!

I've also been bitten by the hand spinning tops bug. :ahhh :ahhh
Here are my attempts at making one.
1st prototype, more of a proof of concept.
I remembered I had some worn derailleur pulleys, and decided to try and make something out of them.
Cleaned them up, degreased them, and gave them a spin... That was a bust! The ball bearings had bits of rust so, I extracted the bearings from the pulleys, bought a cheap bearing, degreased it, and glued the 3 bearings together with super glue. It worked out nicely but it just spins for a few seconds...

I am now working on my 2nd prototype.
Bought 5 bearings, 1 good quality one and 4 cheap ones to use as weights.
Again, degreased the bearing, and this time, I'm putting them together with screws between 2 layers of 0.5mm carbon fiber sheet.
This one is still a work in progress, and will look a bet better once finished.


I'll update you guys once I finish it.
-
Here it is! V2 is finished... mostly...
It spins much better than V1, but, as it was made without any precision tools, it's not perfectly balanced. Overall, I'm very happy with the result.
Also, I learned something in the process... rubbing alcohol and plexiglass don't go well together. It's cracked allover, but it's a nice effect. I'll have to make new thumb rests.(here you can see the thumb rests without any problem)


(here, after cleaning it with rubbing alcohol, the thumb rests are all cracked up)



-
That is really cool!
I'd love to see a video of it in action!
Def
-
Maybe I'll make a video once I have more spinners to compare.
For now, a peak at the new prototype (still not the one that I really want, but that one will take a while)


Aluminum body, and thumb rests (not made yet)
-
@FInixNOver said:
Maybe I'll make a video once I have more spinners to compare.For now, a peak at the new prototype (still not the one that I really want, but that one will take a while)


Aluminum body, and thumb rests (not made yet)
Oooh cool. I just got a Vorso Flat Top the other day and I'm hooked on spinners now

-
Sweeeeeet! :D
Ive been spinning my pencil around my thumb for awhile now but it might be nice to break out the fidgets.
I saved the Bearing and Racer off the rear axle of my Duramax. It still spins great so I'd like to try and make something for it one day......because I don't have enough projects apparently
-
Maybe I'll make a video once I have more spinners to compare.
For now, a peak at the new prototype (still not the one that I really want, but that one will take a while)


Aluminum body, and thumb rests (not made yet)
Oooh cool. I just got a Vorso Flat Top the other day and I'm hooked on spinners now

The Vorso is awesome! The possibility to swap the bearing is genius!!
I just can justify spending 150+ euros it would take to get one. (I know they're sold out at their website, but there's a drop running over at massdrop for those that want to get one - $194.99 + shipping) -
Here it is completed.
Smaller footprint, and shorter spin times (there's a couple of reasons for this - read through). This is to be expected since I'm using steel bearings with steel cage, so there's quite a bit of friction.
One thing I found out is that I'm not using stainless steel bearings. I didn't know this at first, and removing the lubricant that they came with, turned out to be a bad idea.
I started noticing some grinding effect, and latter realized it was rust starting to form inside the bearing. So I can't have the bearing completely unlubricated, so I use a couple of drops of mineral oil, but this also adds to the friction, and shorter spinning times, however, it spins really smoothly.
Either way, it's not a big deal, since i find myself starting and stopping it mid spin. It's more about the fidgeting than the spin times.



-
I had to decommission the V2! :-
Was tying to make some improvements, or so I thought they would be, but I wasn't very successful...
Ended up taking to much material from the carbon fiber layers, and it had too much flex in the middle. Tried gluing the bearing to the CF, but that didn't solve the problem.So, I took it apart, and used most of it to make a new one.
Here it is, V2.1




-
I like this thread :)
RIP V2 - long live V2.1 :D
Is that carbon fibre in the last pic?
-
My fidget is a rubix speed cube. I decided to learn how to solve the rubix cube last year (gotta love you tube for stuff like that), and am now trying to get my time down to as low as possible. I stuck with a cheapo cube until I could solve it easily, then invested in the rubix speed cube and cube lube (which turned out to be standard silicon grease) to get faster. Once I've got to the limits of this one I'll invest in one of the expensive speed cubes maybe.
I keep a rubix cube on my desk at work which most people naturally pick up and mess up for me as well.
I'm down to 2 1/2 minutes now. It never ceases to amaze me how people can solve them in seconds. I'll be happy once I get under 2 minutes (for now) :D
-
Wow - I remember the Rubiks cube when it first came out! I used to be able to solve it, but it took me a lot longer than 2.5 minutes! A guy at school taught us all how to do it.
I have to say that my Vorso Flat Top is hardly ever out of my hand now. It requires no thought, helps me concentrate. I even took it to Oktoberfest :D
<a href="http://s36.photobucket.com/user/DaveK-ToolPics/media/IMG_0922_zpstzzqmoif.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i36.photobucket.com/albums/e10/DaveK-ToolPics/IMG_0922_zpstzzqmoif.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
@Kevin Davey said:
My fidget is a rubix speed cube. I decided to learn how to solve the rubix cube last year (gotta love you tube for stuff like that), and am now trying to get my time down to as low as possible. I stuck with a cheapo cube until I could solve it easily, then invested in the rubix speed cube and cube lube (which turned out to be standard silicon grease) to get faster. Once I've got to the limits of this one I'll invest in one of the expensive speed cubes maybe.I keep a rubix cube on my desk at work which most people naturally pick up and mess up for me as well.
I'm down to 2 1/2 minutes now. It never ceases to amaze me how people can solve them in seconds. I'll be happy once I get under 2 minutes (for now) :D
It's been a while since I picked mine up!
I think the best time I ever got was just a hair under 2 minutes.
If you want to get a good speed cube without being too expensive, you can try cube4you dot com. I have an original, but it was quite stiff, Then I got a speed cube kit (yes, completely disassembled :ahhh) from that site, and got another kit (a cheaper one) completely free!! -
My fidget is a rubix speed cube. I decided to learn how to solve the rubix cube last year (gotta love you tube for stuff like that), and am now trying to get my time down to as low as possible. I stuck with a cheapo cube until I could solve it easily, then invested in the rubix speed cube and cube lube (which turned out to be standard silicon grease) to get faster. Once I've got to the limits of this one I'll invest in one of the expensive speed cubes maybe.
I keep a rubix cube on my desk at work which most people naturally pick up and mess up for me as well.
I'm down to 2 1/2 minutes now. It never ceases to amaze me how people can solve them in seconds. I'll be happy once I get under 2 minutes (for now) :D
It's been a while since I picked mine up!
I think the best time I ever got was just a hair under 2 minutes.
If you want to get a good speed cube without being too expensive, you can try cube4you dot com. I have an original, but it was quite stiff, Then I got a speed cube kit (yes, completely disassembled :ahhh) from that site, and got another kit (a cheaper one) completely free!!Thanks, I'll check them out
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login