firearms
-
I hear the shield is good but I prefer the Walther PPS because you can pocket carry it with the short flush bottom magazine. I prefer the .40 which is very controllable with a Limbsaver12012 rubber grip sleeve.
-
Ohh man! Nice pic! Love the rifle and the slippie. They go together rather well.
Nate
That's us mobile -
Thanks Nate!!!

-
i'm liking it (s&w shield) cleaned the factory gunk off today (learned how to field strip it)
Question:
-do you; use traditional gun oil/lube (wet) or dry-lube?-do you prefer; manual safety or no safety?
I grew up with a safety and I doubt the second to unsafe it will matter for me (with good-sound practice/training). I'm not saying those who prefer no-manual-safety are in-error/nuts! nay nay to each their own, just curious what you all like ;)
-
I tend to like a safety on my pieces. Although my S&W Sigma does not have one, but I am fine it and works well for that pistol. Also I just use gun oil.
Nate
That's us mobile -
I like froglube for polymer framed guns but I really don't think it matters EXCEPT some black nitride finishes become cloudy with some cleaners.
Also Hoppe's #9 removes/destroys nickel.
-
@ducttapetech said:
I tend to like a safety on my pieces. Although my S&W Sigma does not have one, but I am fine it and works well for that pistol. Also I just use gun oil.Nate
That's us mobileI like a safety and a hammer (an immediate visual on condition).
Oil, usually whatever I have on hand. Rem Oil, CLP, Synthetic motor oil etc.....
-
Yay. I got my second SKS back from the gun shop. I saw another club member with his all dressed up and thought I would like to have one similar but different. Thus far, I have added the following...
- ATI SKS Strikeforce stock.
- NCstar SKS Bayonet lug mount bipod.
- NCstar bolt on long muzzle brake.
- NCstar boar blaster combo kit.
- NCstar shell deflector.
Here it is with my first SKS that I will be keeping original.
-
Chako, Please don't shoot your SKS with that muzzle brake mounted. It will fly off while you are shooting. Ask me how I know. I was lucky you may not be.
-
What happened?
-
They are made of cheap steel when you are shooting it will bend until it is bent enough for a bullet shoots to it off. This happened to my buddy's SKS and my Moslin Nagant M44 we were shooting surplus ammo in both rifles.
-
Thanks for the warning. I will keep a very close eye on it.
-
@Mike 56 said:
They are made of cheap steel when you are shooting it will bend until it is bent enough for a bullet shoots to it off. This happened to my buddy's SKS and my Moslin Nagant M44 we were shooting surplus ammo in both rifles.I had a fake can on a Krinkov that happened to. After that I SBR Form 1'd it. It's now my Katrina gun. If I have to evacuate it fits in a backpack folded ready to go with a 20 round magazine. And its legal. And its not visible in case there are police infringing on the 2nd amendment as happened in Louisiana only to leave people unarmed and at the mercy of looters.
-
Chako, It's been a long time since we were playing with NcStar add-ons on our milsurp rifles. I was talking to my long time shooting buddy last night. NcStar at one time made two types of muzzle breaks. One type twisted on it would shoot sideways until a bullet would shoot it off NOT GOOD and it sounds like a barrel blowing up. Makes you want to check your pants. The second type clamps on with two screws the problem with type is the screws the steel is softer than common rubber after a few shots one of the screws will break then a bullet will shoot it off. We always thought if the screws were replaced this type muzzle break might be workable. The best way to put a muzzle break on an SKS is to buy an AK47 barrel die to thread the barrel. There are lots of different style AK47 muzzle breaks you can buy.
-
I will look into it. I know this one was recommended by a couple club members as they haven't had any issues with it. Either way, thanks for the warning. Much appreciated.

-
@jerseydevil said:
Sweet pic.
94/22's are cool. So are Marlin 39's.The modern squared-off levers on new Marlin 39s are not cool. The one I had sliced my little finger open every time I used it. Got rid of the gun in a hurry.
-
@Mike 56 said:
Chako, It's been a long time since we were playing with NcStar add-ons on our milsurp rifles. I was talking to my long time shooting buddy last night. NcStar at one time made two types of muzzle breaks. One type twisted on it would shoot sideways until a bullet would shoot it off NOT GOOD and it sounds like a barrel blowing up. Makes you want to check your pants. The second type clamps on with two screws the problem with type is the screws the steel is softer than common rubber after a few shots one of the screws will break then a bullet will shoot it off. We always thought if the screws were replaced this type muzzle break might be workable. The best way to put a muzzle break on an SKS is to buy an AK47 barrel die to thread the barrel. There are lots of different style AK47 muzzle breaks you can buy.Threading a barrel is very illegal in certain places so it might not be a option.
-
In Ca threaded barrels are only ilegal on hand guns. Muzzle breaks are another story. There is a fine line between a muzzle break and a flash hider according to the DOJ. But they have comed down after they kept losing in cort. You can have a flash hider on a center fire rifle like a SKS with a fixed magazine or AR, AK47 with a bullet button not ok on let's say a Mini 14. Rim fire flash hiders are fine.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


