Gerber Dime Review
-
Good first review, claws.
And good photos to accompany.
I think most of us who've owned Dimes have had similar nail-breaking experience with opening implements when the tool is new. Hopefully yours will break in some and become smoother.
I personally thought that for the price, it was a decent tool, but as I also had a Leatherman Squirt PS4, I gave my Dime to my brother.
I've been a bit perplexed by the less than stellar scissors on it, since Gerber is owned by Fiskars, who KNOW how to make scissors.
Mine also had bad wire cutters, which i discuss here...
</topic/42504 -
Hadn't thought to test the wire cutters - on a small tool like this, I don't expect much out of them.
Just tried a paperclip, and I'd agree - they're bad. In fact, they don't cut the paperclip, and the pliers instead push it onto an angle, lock up, and refuse to budge. Expect nothing from the wire cutters, and you'll still be somewhat disappointed.


This shouldn't happen. The paperclip I tried it on is not a tough wire by any means. Taking a guess, the spring loading method Gerber used on the pliers has something to do with it not springing open.
In terms of the value, I'm a bit undecided. In NZ at least, it competes pricewise with the Style CS/PS, and the Squirt PS4 is around double the price. The Dime definitely has more functions, but most of them aren't that good. Maybe I need a Style PS to compare it against!
-
-
-
Good review mate.

For those having scissor problems; have you noticed that they are "left handed"? It could be that, without realising it, you are pushing the blades apart rather than together. Or, of course, they might just be bad scissors.

-
-
-
@Gareth said:
Good review mate.
For those having scissor problems; have you noticed that they are "left handed"? It could be that, without realising it, you are pushing the blades apart rather than together. Or, of course, they might just be bad scissors.

Yep, knew they were left handed, still hate them. They are too thick and square edged at the cutting edge, which makes them harder to use. And they don't open far enough, and the spring is too strong - you shouldn't have to push so hard to cut through things. I also don't like the scissors on the squirt. 58mm is king
-
-
I'm also left handed, and they're still bad. Also, when i do scissor testing, I usually say if they perform differently left or right handed.
Buck: If you need pliers, they obviously beat the 58mm SAKs and Crosscut. The Crosscut's scissors are pretty good, and excellent on heavy material. The 58mm SAK's scissors are AMAZING for their size, but suffer against heavy materials. They are light years better than the Dime.
It might sound dumb, but if it's a cap lifter you want, the Dime is just about industry leading. The Next best, IMO, is the Leatherman Style.
Too many differences between those three to make a good comparison, IMO.
-
@Lynn LeFey said:
@claws42 said:
I'm left handed
They're just bad

I'm also left handed, and they're still bad. Also, when i do scissor testing, I usually say if they perform differently left or right handed.
Buck: If you need pliers, they obviously beat the 58mm SAKs and Crosscut. The Crosscut's scissors are pretty good, and excellent on heavy material. The 58mm SAK's scissors are AMAZING for their size, but suffer against heavy materials. They are light years better than the Dime.
It might sound dumb, but if it's a cap lifter you want, the Dime is just about industry leading. The Next best, IMO, is the Leatherman Style.
Too many differences between those three to make a good comparison, IMO.
Agreed. The dime scissors suck compared to the 58's but are much better than nothing. Even tho the dime is a keychain tool I much prefer it in the pocket. It's personally to bulky for me on the keychain. It would be nice if they had a larger version (juice or skeletool size) but Gerber definatly has a win with the Dime. How do the pliers compare to the vic 91mm pliers?
-
I think it's pretty well known that I'm 'not a fan' of the Vic 91 pliers.
I honestly can't do a comparison of the two because I don't own a Dime anymore, but my general impression is that the Dime's would be capable of somewhat heavier duty tasks. They are nowhere near as stout as the pliers on the Leatherman keychain size tools (Squirt, Style PS), but you CAN use most of your hand to squeeze, instead of just the strength of your thumb for the Vic 91s.
One really GOOD thing about the Vic pliers is that they had insanely precise tips, but as i recall, that was also one of the things I liked about the Dime.
If I had to put money on quality of material, I'd go with the Vic.
In practice, I prefer a Leatherman Keychain size tool for pliers, OR, even better, the IDL T10. Not as tiny precise head, but incredibly robust for the size. If you get a Leatherman Style PS, the difference in weight between that entire tool and the plier layer on a Vic 91, is, if I remember correctly, 1/6 of an ounce. That is, IMO, one of the best solutions, and it can be paired nicely with a 91mm vic to great effect.
-
@Lynn LeFey said:
I think it's pretty well known that I'm 'not a fan' of the Vic 91 pliers.I honestly can't do a comparison of the two because I don't own a Dime anymore, but my general impression is that the Dime's would be capable of somewhat heavier duty tasks. They are nowhere near as stout as the pliers on the Leatherman keychain size tools (Squirt, Style PS), but you CAN use most of your hand to squeeze, instead of just the strength of your thumb for the Vic 91s.
One really GOOD thing about the Vic pliers is that they had insanely precise tips, but as i recall, that was also one of the things I liked about the Dime.
If I had to put money on quality of material, I'd go with the Vic.
In practice, I prefer a Leatherman Keychain size tool for pliers, OR, even better, the IDL T10. Not as tiny precise head, but incredibly robust for the size. If you get a Leatherman Style PS, the difference in weight between that entire tool and the plier layer on a Vic 91, is, if I remember correctly, 1/6 of an ounce. That is, IMO, one of the best solutions, and it can be paired nicely with a 91mm vic to great effect.
Thanks for the input. I haven't handled vic pliers yet so I can only guess how they "feel" honestly if I need pliers I will be carrying my rebar or 600.
-
My Gerber Dime scissor broke without using it. I take out to admire it. I flip up the scissor and it broke. A metal just broke, Luckily the shop accept to send for repair free of charge.
-
That's a shame. Not the first time I've heard of it happening either. Leatherman seem to have the same issue with the scissors on the Style as well. My guess is that trying to get such a short piece of metal to just the right temper isn't all that easy.
-
I just got a Dime Travel a week or so ago.
Lots of the same impressions. No useless file, but a hook of questionable usefulness. They say it is for broken scissors on luggage, but think of it for a minute: Is a guy or gal who's into MTs going to own luggage with cheap zippers? Doubtful. However, it is a fair replacement for the blade. (what else are they going to put there?)
The opener is replaced with a decently-useful file. Only problem is that the serrations are cut such that you have to push WITH the hinge, so filing something is going to tend to close the file. FAIL Gerber, FAIL.
The other implements are nail-breakers out of the box. However... if your nails are strong enough to cycle them several hundred times to finish polishing the internal mating surfaces, you'll be rewarded by a much smoother action. After you've ground them together enough, then put a drop of oil on each pivot, and cycle them some more. Surprisingly better. (but still a bit tough)
I can't give this to my 5 year-old niece, as I'd planned to. But I CAN keep it for myself for a travel MT, and give her a Wenger AT I ordered, hehehe.
-
I just unpacked a red Dime i've had for a couple of years. My edc small MT has always been my beloved Clutch.
I think it's a little unfair to compare mts of differing specs, but I was surprised at the small size of the Dime and the choice of tools.
Blade and cap lifter look okay. I can't make my mind up about box cutter.Any tool will largely succeed or fail due to the user's expectations. I think the file, scissors and tweezers could handle fingernail care.
But expecting them to handle much more would be problematic. However, I read the more positive reviews and will give the Dime
every opportunity to surprise me. -
It'll be interesting to hear how you get along with it Rathbone.
It's funny, I really don't dislike the Dime at all (and actively like the bottle opener) but I've not carried it in a long time, with the PS4 and P4 taking front stage when it comes to keyring carry. Might have to change things up and dig out the old Dime. -
@Corwyn said:
Nice review mate. It put to words my thoughts on the Dime as well..
However... it's sooo perty... To me it looks like the best-looking keychain multitool around.Got it for the cool factor, keeping it for the cool factor.. using Style/Rambler for usefulness

Update on this:
My first Dime was pretty, but tools were nailbreakers and pliers were twisty.
My second Dimecame with scrathes from the factory and casting errors.I now got a Style PS... so much lighter, stronger and it oozes quality... still love the design of the Dime but the quality is miles below the competition...
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login