And so it begins.... (My adventures into Alox!)
-
Now that is pretty bad a$$! Nice job Syph!
JR -
@MadPlumbarian said:
Now that is pretty bad a$$! Nice job Syph!
JRI can only second that... it has turned out prettier than a Disney Princess.

I will call this model ALPINIST, as this is its intended purpose.
-
Can someone school me on the liners that seperate tools. That last mod has the saw and file butted right up to one another. Do liners just provide room to get to the nail nicks, or do they serve another purpose?
-
@tommywp said:
Can someone school me on the liners that seperate tools. That last mod has the saw and file butted right up to one another. Do liners just provide room to get to the nail nicks, or do they serve another purpose?They provide stength to the frame and work against the resistance of the backsprings. If you were to say build a swisschamp and leave out all liners, the inner tools would have zero snap and the pins would be bowed. But thin tools you can get away with putting a couple per layer.
-
Can someone school me on the liners that seperate tools. That last mod has the saw and file butted right up to one another. Do liners just provide room to get to the nail nicks, or do they serve another purpose?
They provide stength to the frame and work against the resistance of the backsprings. If you were to say build a swisschamp and leave out all liners, the inner tools would have zero snap and the pins would be bowed. But thin tools you can get away with putting a couple per layer.
Interesting, thanks. Nice work, as always.
-
These are Ti scale blanks that I manually textured on my mill today as a test. I think they'll look pretty sweet anodized and with the upper surface sanded shiny.... :D
-
They do look good syph, here's an idea, idk if it would be possable but if so what about a mini diamond plate pattern? Now that would be cool!
JR -
@Syph007 said:
Well I did some kind of chemistry here by accident...
The center was polished brass and I wanted to anodize the rest blue... didnt quite work, but its interesting.

This, for me, is still the most beautiful scale you made so far. Can you replicate this "accident"? If I ever get the funds, I'll be asking you to build me a SAK with this cross.

-
Well I did some kind of chemistry here by accident...

The center was polished brass and I wanted to anodize the rest blue... didnt quite work, but its interesting.

This, for me, is still the most beautiful scale you made so far. Can you replicate this "accident"? If I ever get the funds, I'll be asking you to build me a SAK with this cross.

Im sure i could do it again ya. The anodize part was good, but I didnt care for the brass turning black.
-
@Syph007 said:
These are Ti scale blanks that I manually textured on my mill today as a test. I think they'll look pretty sweet anodized and with the upper surface sanded shiny.... :DI would have had this done but I sliced my left hand real good so modding is slow. Here are the scales anodized. They look much better in natural light but the sun went down too fast!
-
These are Ti scale blanks that I manually textured on my mill today as a test. I think they'll look pretty sweet anodized and with the upper surface sanded shiny.... :D
I would have had this done but I sliced my left hand real good so modding is slow. Here are the scales anodized. They look much better in natural light but the sun went down too fast!
You just keep upping the game, Syph! Those are sweet looking scales.
-
Well I did some kind of chemistry here by accident...

The center was polished brass and I wanted to anodize the rest blue... didnt quite work, but its interesting.

This, for me, is still the most beautiful scale you made so far. Can you replicate this "accident"? If I ever get the funds, I'll be asking you to build me a SAK with this cross.

Im sure i could do it again ya. The anodize part was good, but I didnt care for the brass turning black.
Could the brass cross be taken out? To leave it hollow, like in the new scales you just did? Or is the brass too "stuck" in place to remove?
-
Well I did some kind of chemistry here by accident...

The center was polished brass and I wanted to anodize the rest blue... didnt quite work, but its interesting.

This, for me, is still the most beautiful scale you made so far. Can you replicate this "accident"? If I ever get the funds, I'll be asking you to build me a SAK with this cross.

Im sure i could do it again ya. The anodize part was good, but I didnt care for the brass turning black.
Could the brass cross be taken out? To leave it hollow, like in the new scales you just did? Or is the brass too "stuck" in place to remove?
Yup I could punch it out after.
-
Here is my latest completed Ti mod. :D



-
Just a crazy idea. Would it be possible to use Leatherman mini pliers from the Squirt or the Style PS as the basis, and add SAK 58mm tools and your scales?
-
Very cool Syph!!!!!!
-
@Sakpan74Gr said:
Just a crazy idea. Would it be possible to use Leatherman mini pliers from the Squirt or the Style PS as the basis, and add SAK 58mm tools and your scales?What is this "Leatherman" model you talk about?! I know not of any such Victorinox...

-
Just a Frankenstein keychain multitool idea of mine. Maybe a silly idea. Take apart a Style PS,or a Gerber Dime , keep the pliers and add components from a Rambler or a Minichamp, if possible.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

