How sharp is sharp for your multitool?
-
Like most of the guys here I like to keep all my knives and multis as sharp as possible if it can't shave the hair from arm it ain't sharp enough.I have a sharpmaker on my ever growing wish list so for now I ahve to make do with a cheapo diamond stone and a pocket gat stick ceramic sharpener and another pocket sharpener that uses tungsten carbide
-
@NutSAK said:
If you're sharpening once a week and not actually damaging the blade between sharpenings, I would suggest you purchase a strop and use it regularly. Most of the time when you sharpen a blade, it doesn't need to have metal removed. Most of the time the "rolled" edge just needs to be straightened back out. This is what a strop is for. If you strop regularly, you should only need to use stones to remove metal if the edge is nicked or otherwise damaged.Right on the money = no need to go buy s strop , I use an old leather belt that is attached to the metal leg of my sharpener setup.
I have been using a leather belt to strop with since the beginning of the year. Make sure the belt really is leather, make sure it is smooth and nick free,
You may want to take a glass bottle filled with warm water and smooth it out. then go over the belt with a pumice stone. It will help if the belt is 2 inches or wider.
http://www.straightrazorplace.com/forums/newbies-corner/18839-temp-leather-belt-strop.html -
The only thing I sharpen myself is my PST - it being a bit of a beater and frequently used for cutting tiles (lino n' stuff) on concrete etc.
How sharp? Sharp enough
-
@micky d said:
you can sharpen with almost any fine materials the problem is the consistency of the angle, thats why I can't sharpen anything without the sharpmaker. Wish I could be like the guy on youtube who can sharpen a knife razor sharp using a fine finished concrete wall.
It just takes practice, or someone to teach you one on one :)
What about that bloke near you who makes swords, could he take you through the motions ???
He uses a grinder, most of his knife are for show so no edge :( Guess I could practice myself just have to find a knife I'm willing to sacrefice :P
-
@GMArthur said:
I try to keep my Leatherman's plain edge pretty sharp but it doesn't happen too often. It's my beater blade. I'll get it nice and sharp and then use it to cut up a bunch of shingles or use it to cut up a bunch of bait on a pile of rocks. That thing takes it's toll on the edge...

The serrated blade is always kept sharp and clean as I use it primarily as my "food" knife. Those times when a sub sandwich needs cut in half and I'm sitting in the middle of a lake on a boat. Or when I'm at work and eating lunch the serrated blade does kitchen duty. I always carry a dedicated pocket knife that is kept in top shape for all other cutting chores.
If thats my knife I would metal polish the hell out of it :D There is no distiniction between my work knife and food knife and I work in the farm, it grosses my wife very much. Guess I have to do what you do :D serrated for food straingth knife for work.
-
@NutSAK said:
If you're sharpening once a week and not actually damaging the blade between sharpenings, I would suggest you purchase a strop and use it regularly. Most of the time when you sharpen a blade, it doesn't need to have metal removed. Most of the time the "rolled" edge just needs to be straightened back out. This is what a strop is for. If you strop regularly, you should only need to use stones to remove metal if the edge is nicked or otherwise damaged.If you're sharpening once a week and not actually damaging the blade between sharpenings, I would suggest you purchase a strop and use it regularly. Most of the time when you sharpen a blade, it doesn't need to have metal removed. Most of the time the "rolled" edge just needs to be straightened back out. This is what a strop is for. If you strop regularly, you should only need to use stones to remove metal if the edge is nicked or otherwise damaged.
Right on the money = no need to go buy s strop , I use an old leather belt that is attached to the metal leg of my sharpener setup.
I have been using a leather belt to strop with since the beginning of the year. Make sure the belt really is leather, make sure it is smooth and nick free,
You may want to take a glass bottle filled with warm water and smooth it out. then go over the belt with a pumice stone. It will help if the belt is 2 inches or wider.
http://www.straightrazorplace.com/forums/newbies-corner/18839-temp-leather-belt-strop.htmlAnybody have a strop picture? Using leather belt do you have to be awhere of the angle?
-
My multitool blade I don't keep as sharp as my pocketknife blade. Pocketknife blade is shaving sharp. Multitool blade, not so much. I find that for the rough work I use my multitools for, a really thin, shaving sharp blade tends to bend and dull really fast. A wider edge holds it's sharpness longer, and works just as well. Again, I carry a pocketknife as well, so I don't need my multitool for delicate jobs. I have also found that a good utilitarian edge doesn't need to be shaving sharp to get the job done safely. I was using my multitool a few months back, and touched the edge, and it FELT dull to the touch, but when I started cutting some thick rope with it, it worked just fine, with not so much pressure as to hurt myself if I slipped.
-
If you're sharpening once a week and not actually damaging the blade between sharpenings, I would suggest you purchase a strop and use it regularly. Most of the time when you sharpen a blade, it doesn't need to have metal removed. Most of the time the "rolled" edge just needs to be straightened back out. This is what a strop is for. If you strop regularly, you should only need to use stones to remove metal if the edge is nicked or otherwise damaged.
If you're sharpening once a week and not actually damaging the blade between sharpenings, I would suggest you purchase a strop and use it regularly. Most of the time when you sharpen a blade, it doesn't need to have metal removed. Most of the time the "rolled" edge just needs to be straightened back out. This is what a strop is for. If you strop regularly, you should only need to use stones to remove metal if the edge is nicked or otherwise damaged.
Right on the money = no need to go buy s strop , I use an old leather belt that is attached to the metal leg of my sharpener setup.
I have been using a leather belt to strop with since the beginning of the year. Make sure the belt really is leather, make sure it is smooth and nick free,
You may want to take a glass bottle filled with warm water and smooth it out. then go over the belt with a pumice stone. It will help if the belt is 2 inches or wider.
http://www.straightrazorplace.com/forums/newbies-corner/18839-temp-leather-belt-strop.htmlAnybody have a strop picture? Using leather belt do you have to be awhere of the angle?
About one minute in mate :) http://www.youtube.com/watch?v=0a2Jm3pkXqk
-
I try and keep all my knives razor sharp. I cut the piss out of my hand with a dull knife when I was 15. I still have an ugly scar there.
-
In actually only use a course dmt stone on my blade. I carry another knife allways and I use the MT blade for rough cutting so I dont bugger up the nicer blade.
-
@ducktapehero said:
I try and keep all my knives razor sharp. I cut the piss out of my hand with a dull knife when I was 15. I still have an ugly scar there.I had a guy come at me one night on the docks with a dull knife and it left an ugly scar, but no as bad as the scars he had when he "fell down" a couple times !
-
I try and keep all my knives razor sharp. I cut the piss out of my hand with a dull knife when I was 15. I still have an ugly scar there.
but no as bad as the scars he had when he "fell down" a couple times !
Good to hear

-
I try and keep all my knives razor sharp. I cut the piss out of my hand with a dull knife when I was 15. I still have an ugly scar there.
I had a guy come at me one night on the docks with a dull knife and it left an ugly scar, but no as bad as the scars he had when he "fell down" a couple times !
I have to agree, dull knives makes ugly scar, but impact scars makes uglier scars >:D
-
Not another sharpening thread.
If you're really hard core about sharpening get a 20x illuminated stereo microscope like I have. It's great for examing that perfect edge. -
I always keep my knives in tip top shape. I can't stand dull knives! :ahhh
-
Remember in how sharp is sharp there are many kinds of sharp for different purposes, polished edges vs. saw edges. There are many kinds of bevels for different purposes. While I did get a stereo microscope for other purposes I have found it is really great for examining edges.
-
could you sharper knives using glass? Like the ones on soda bottles?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login