What's your latest SAK?
-
Canada eh.
A set of five Canadian Spartans.
Those are awesome (seen them here before I think?). I need them too :)
And nice haul SAK Guy!Thanks. I posted a catalog picture of them earlier. Got them from SwissBianco Canada; they may be more widely available later.
Ordered the same set yesterday :)

-
Just in, an old Victoria with carbon steel blade and horn handles. Have mixed feelings about it (and about how much I paid for it). Its old and its rare. Its also rather rough, with a heavily sharpened blade and a chip in the handle on the reverse side.
-
Broke down and finally bought a spork. Its awkward to use, surprisingly heavy, and the tines on the end are basically worthless. A regular aluminum camp spoon in conjunction with a SAK is more useful.
(Just full of negative vibes today. :ahhh )
-
@ColoSwiss said:
Broke down and finally bought a spork. Its awkward to use, surprisingly heavy, and the tines on the end are basically worthless. A regular aluminum camp spoon in conjunction with a SAK is more useful.
(Just full of negative vibes today. :ahhh )Dude have you been drinking ?
So your Spork is your latest SAK. LOL.
-
Broke down and finally bought a spork. Its awkward to use, surprisingly heavy, and the tines on the end are basically worthless. A regular aluminum camp spoon in conjunction with a SAK is more useful.
(Just full of negative vibes today. :ahhh )Dude have you been drinking ?
So your Spork is your latest SAK. LOL.
Where I happened to be. Like the old sea captain who was drinking cheap red wine during a hurricane - any port in a storm. :D
-
Broke down and finally bought a spork. Its awkward to use, surprisingly heavy, and the tines on the end are basically worthless. A regular aluminum camp spoon in conjunction with a SAK is more useful.
(Just full of negative vibes today. :ahhh )Dude have you been drinking ?
So your Spork is your latest SAK. LOL.Where I happened to be. Like the old sea captain who was drinking cheap red wine during a hurricane - any port in a storm. :D
I'm the one who should have an excuse.I just opened my 4th bottle of Becks Dark.
I could never understand the fascination with the Spork.A worthless item and a solution to a non existent problem.LOL
-

My slightly used Space Shuttle Master Craftsman. Other than some seriously gunked up joints and a broken scissors spring, in fairly good condition. Same one I drooled over in the display case at the mall, but couldn't see spending my high-school-aged lawn - mowing money when I already had another SAK, the 111mm Adventurer.In defense of the spork, especially the LMF version, I've found mine to be pretty handy, and it being titanium gives it that space age coolness. Granted, it has the full-sized spoon and fork on opposite ends, without other gadgets cluttering it up. (That's what a SAK is for, right?) ;)
Matt in Texas
Sent from my SM-G900T using Tapatalk
-
Just got this in for the Super Secret Ignore This! SAK Giveaway that is an easter egg hidden in the Swiss Army Knights Forum

Can you find it?
-
I bought the red version of a SAK i'm not particularly crazy about. I guess I'm going crazy.


-
I bought 3 SAKs at the flea market today
First up I found an Electrician from '97 with the Old Cross.
the rivet looks like it has had some work done

Next up a a Champion that I date as 1983-1985 but since the cap lifter has a half stop, this must be 1985
I noticed the Brass pin has a bushing/sleeve/collar? in the spot where the inline phillips rests, and the liner between the file and saw is thicker than the others and is full height (same as the ones adjacent to the scales)
and the one I feel was the best find (though I did not own an electrician, old cross alox, and I LOVE champions)
model 134k roughly 1959-1962
the shield seems thicker than the newer ones and has a goldish tint to it.
the back phillips has a square shaft and has a file, but does not have the can key.
the can opener has the +PAT on it and the cap lifter has the wire stripper
small blade has the clip point
The main blade has "Abercrombie & Fitch" / "Made in Switzerland" on it
the back tang is a Victoria :ahhh
I am very happy with this little find. I wish it had the Toothpick and Tweezers, and a keyring (I like pocket clip carry), but otherwise this is an amazing older
-
I wish they still offered the clip point as the small blade.
-
@raistlin65 said:
Just got this in for the Super Secret Ignore This! SAK Giveaway that is an easter egg hidden in the Swiss Army Knights Forum
Can you find it?
Nope, we've decided to ignore this one!
-
Victorinox Alox Pionier Limited Edition 2015




-
Just got this in for the Super Secret Ignore This! SAK Giveaway that is an easter egg hidden in the Swiss Army Knights Forum

Can you find it?
Nope, we've decided to ignore this one!
I can't ignore that SAK.

-
Nice one Chris

But in the description I read the year is engraved, right?
Some other member mentioned it's only a print?
A laser engraving perhabs?Regards
Markus
-
@ Markus: The "2015" is definetely not engraved. I suppose anodizing/silkscreening.
-
@chris.customworks said:
@ Markus: The "2015" is definetely not engraved. I suppose anodizing/silkscreening.Its definitively painted on top, you can feel it.
Its good paint though, does not come off with alcohol or acetone. Also tried scratching with fingernail and hardwood spatula without success.
-
Nothing special I guess, replaced my SC XLT with a Victorinox / Wenger EVO S54. Wear out the saws and files in about 3 to 5 years. The rest is okay - so I will use it in the office to work on things.
The S54 is now Vic, not Wenger, although it looks like one - it has EVO grips and is super nice in the hand. Most of the tools are Wenger, except the cap lifter and can opener - those match the Vic style. I love the spring less scissors and pliers. I have a big bag of "09" springs around here just to replace the things. I go thru about one each per year.
IF anyone knows how to sharpen the saws, both metal and wood, or re -- some how make the file cut after it wears down without replacing the blade, I would be interested.
-
@ Markus: The "2015" is definetely not engraved. I suppose anodizing/silkscreening.
Its definitively painted on top, you can feel it.
Its good paint though, does not come off with alcohol or acetone. Also tried scratching with fingernail and hardwood spatula without success.
Why would you?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login























