firearms
-
Looking at the new shotgun earlier, I noticed that I couldn't load any snap-caps into the tube magazine.

I couldn't press the magazine spring follower any. At this point, I start to think I have the most absolute bad luck with shotguns ever. Then I got to thinking why I couldn't budge the follower any, thereby rendering the Hatsan shotgun a single shooter. I take a look at the magazine tube and how to get into it. I know how with a Remington 870, but not with this shotgun. I triple read the manual and see nothing about how to get into the magazine tube. I then do an extensive online search. I eventually find a better manual as a PDF for a similar model...which has instructions on how to add an extension tube. It doesn't get into great details however, and I am still puzzled. I examine the shotgun once again and notice that if I press the follower and the retaining plug, both move in unison. Hmmm...so that means something is in there. I start to think about the type of plugs that make your shotgun legal for hunting, which in Canada means you can load 2+1. However, I can't even budge the follower much meaning this is taking up the whole magazine and not a portion of it. So I then go back to the net and eventually find another clue....about using a pair of pliers to remove the end. I get myself a pair of pliers and try everything I could to get some action...to no avail. I then examine the magazine tube more closely and note that I can press the plastic center down, and the metal retaining piece is separate. I then get tweezers and press down on the center part, the metal follows but then goes at an angle. At this point, I gently work up on the metal retaining piece and it is removed. Doh! Why couldn't this be mentioned in the freaking manual?
Anyways, here is what I found in my magazine tube...

Anyone ever see anything like this before? That plastic plug is the length of my magazine tube. No clue why they would ship the shotgun with this monstrosity in it. Unless they are worried about someone picking up the shotgun and going on a rampage...or is it to protect the follower during shipment...which is odd to me seeing the recoil in use should be greater than any knocks during shipment. No mention of this in the instructions either.
I was ready to bring this back to Canadian Tire, I am very happy that I was able to resolve this issue.
-
@Sea Monster said:
Sorry if I am behind the ball on bringing this up (and I am sure the Poms will feel no sympathy)
The Aust G-Man wants to reclassify Lever Action firearms as Semi Automatic (which for us changes the licensing and acquiring allowance)
Apparently this "modern" technology is making guns too powerful to be trusted to the common folk.
Yeah, that late 1800's tech will trip you up every time!!!!! :facepalm:
Ned Kelly carried a lever action. If one bush ranger 130 years ago did, what't to stop modern ones from doing the same? :ahhh
Various reports that the Kelly gang had a Winchester and/or a Spencer. Also a Colt revolving rifle. Supposedly Kelly's favorite rifle was a .577 Snider-Enfield. As with many other 19th century outlaws/gun fighters its often difficult to separate fact from fiction. (Dan Kelly was Ned Kelly's younger brother)
http://kellygang0.tripod.com/weapons2.htm
(I now expect all the Aussies here to jump in with both feet! :D )
Just took another look at the article, and the Winchester shown is an 1892 model (long after Kelly's death).


-
Chaco,
You need to find a decent gun shop, even if it involves a bit of a drive. Seems you've had nothing but problems with the one you're using.

-
I know. Certain I have a lemon in my Remington 870. I rather think my issues stem from the chamber...which means a barrel change may be in order. The Remy is in the hands of a gunsmith as I type...which is why I went out and bought the Hatsan as a backup. Mind you, I had some fun last night figuring out why I couldn't use the included tube magazine...but that challenge is over. :D
You know, a thought just came to me. Maybe what I found was a legal hunting plug but for a longer shotgun. Now that is funny right there.

-
Is the 870 an express or wingmaster? They cut too many corners in the express. A used wingmaster is way better than a new express.
-
I have the 870 SPS Super Mag Turkey/Predator W/Scope.
Here are my issues. Just going to look for some tissues soon. :)
-
Bought the shotgun when I knew very little. I was attracted to the thumb-hole stock (Liking my Benjamin Classis .22 air rifle a lot). When I took it out to the range, realized that it deposted hot shells onto my right forearm (I am left dominant and hence shoot left handed). I tried to bring it back as I only shot 3 shells through it, and the local gun shop told me it is now used and they would be more than happy to take it off my hands for a reduced price. Smurf that! I kept it.
-
Second time to the range, I shot 4 rounds and damaged my Trueglow factory installed red dot sight. Brought it back and handed over the whole thing to local gun shop. Remington was quick, and I got a new dot sight within a week and a half. Yay me!
-
Took gun to range for a third time. Blew the second red dot sight on the 5th or 6th shot. At this point, I only ran aprox 13 rounds through the shotgun. What the smurf! This time, I took off the red dot site and brought that back...still waiting for the replacement or something, and that was well over 2 months ago now.
Either the local gun shop is playing stupid tricks, or Remington is wondering what is going on. The local gun shop told me this time, Remington wanted them to ship the sight to them first. I can just imagine how long they sat on the smurfing thing to begin with. So this is still an open issue. -
Noticed for a new shotgun, the darn gun was very gritty on my first outing. I did clean the barrel first before shooting it. Took it to the gun club and had a more knowledgeable person take the shotgun down and we both cleaned it properly. That did improve the action somewhat.
-
Because I bought the shotgun for 3 gun, I needed to add a magazine tube extension. Local gun shop sold me one, and I went home to install it. Read the instructions and installed it...it was very easy. Next day, I took the shotgun out to the range (4th time), and only could get the original round capacity. I examined the issue and realized there were 2 dimples in the extension tube blocking round access to the extension. Local gun shop dremeled those out for me, as I didn't want to break warranty on the shotgun. Took the gun out to test it out, and found the gun to be so gritty, it was terrible. I figured out that the local gun shop dremmeled those dimples out all right, but neglected to put a rag in the magazine tube, hence all those lovely metal bits went into the action.

-
Took apart the gun and cleaned it out nicely, just in time for a 3 gun. The gun didn't jam on me thankfully. However I quickly found out that the back picatinny rail and the front bead sight didn't make for a good sight alignment. It took me quite some time to find a solution for that, and that was just recently when I went to North Bay and found a heatshield/ghost right sight add on. The shotgun keeps jamming on me however.
So much so that I am now hating my Remington 870. The issue is that once I fire a shell, I can't pump the shotgun back. It jams in the locked position. the action release is also jammed and I have to violently hit the shotgun on a wooden bench to disengage the mechanism, and eject the spent shell.
So that is the tale of me and my Remington 870. Either I have the biggest lemon, or the 870 isn't half as good as everyone is telling me. If I can't get any redress, I will call Remington up and see if they can fix my gun. Now that I have a backup, I won't worry about the gun being MIA for months at a time, which seems the avg speed the gun industry moves these days.

-
-
I've owned 5-6 870's in the past and never had a single issue with them. It's a lemon I think...Remington should replace it with a new one IMO. On a side note.....mine have been plain jane types with beads, rifle sights and std stocks.
-
Bought my 870 express magnum about 15 years ago and got another as a back up at the same time. Other then to test fire about 50 rounds through the back up it was never used because the first is still going strong a few thousand rounds and many years later. Ended up selling the back up a few years ago.
The issue you had with the dimples is a common one and something any good gun shop should have warned you about.
So yeah, I am thinking lemon. Also on a high round count shotgun I would not suggest a thumb hole as it can be hard on the hand.
-
Tomorrow, I am going to take out the Hatsan. Can't wait actually.
I added one of these to improve the visibility of the front sight. Now I have a nice big glowing green dot instead of a weak red one.
Nice lines on this Turkish shotgun.
I bought a pair of shotshell belts that hold a box of shells each because for my first 3 gun, I had nothing to hold shells in other than stuffing them in my pockets...which didn't help my speed any. Now I can look like Poncho Villa.


Also added a 5 shell carrier on the stock.

Should be mostly ready for the next 3 gun.

-
So you haven't shot it yet?
-
What is the capacity?
-
Not yet...been too busy to get out to the range.
Capacity is 4+1
-
Yikes, thats it. Get a tube on that pig.
-
Not sure they make one for it...and besides, I do not like them sticking past the barrel any. I am quite happy with that. I can fast load a shotgun, and I am improving on that with practice. There is one guy in the club that is super fast with a coach gun.
-
What shotgun ammo do you use in 3 gun? Buck, slug, or any old bird shot?
-
Locally, bird shot and slugs so far.
-
Shot the little shotgun and can't love it more. I ran a good variety of rounds through it and it went bang every time. Only one feed issue, and it was my fault. I wanted to see what would happen if I gave it a shorter stroke. I know the little Hatsan and I will get along famously.
Now just waiting for word on my Remington 870.
-
I went from having only 1 5 round magazine for the Hi-Point 9mm carbine, to having 7 total in a few days. I bought 4 on line, and oddly enough, the 2 I ordered from the local gun shop arrived after only a 5 month wait. Funny that I can order 4 mags online and have them to my door a few days later, to having to wait half a year. Can't complain...at least I now have 7 magazines in total.

-
You're ready if....... -
Chako, thinking about that carbine, I was reminded of years ago when I was looking at one (Marlin). Have you tested different bullet weights to see how they print in the carbine. I always thought I would want the heaviest 9mm avail if I got one to go with my pistol.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


