firearms
-
A while ago, I watched Doomsday Preppers. On one episode, the gun simply explodes during practice. Now I don't know if this was a result of owning a poor gun, poor gun maintenance or whatever, but considering a gun is nothing other than an explosion chamber I was not surprised. So, is this a common occurrence and how do you prepare for something like this?
Guns are designed to handle the cartridges they fire. Occasionally somethings goes very wrong, but its extremely rare. There are several possibilities:
-Poorly made gun. Some pot-metal guns are junk, but they're more likely to break and not work long before they become physically unsafe.
-
Old guns in poor condition. The classic example here is old shotguns with built-up damascus barrels. The barrels develop rust in the seams and then someone loads a modern smokeless shell in one and it can't hold the pressure.
-
A plugged barrel. Slip and get some mud in the barrel, then fire the gun without checking it over. Probably lose a couple inches off the end off the barrel.
-
Wrong or bad ammunition. The big one. Guns are designed for a specific cartridge. Load the wrong one and bad things can happen. The Italian Glisenti was an early weak auto pistol firing a very weak cartridge similar in appearance to the 9mm Parabellum. A hot Beretta M38 SMG load was capable of taking a Glisenti apart. Occasionally factory ammo is defective. More often its poorly made reloads. Fire a reload that someone accidentally put a double or triple charge of powder in and the results can be messy. A good quality gun will probably hold it, but sometimes not. For what its worth I never fire commercial reloaded/remanufactured ammo.
If they blew up a gun on tv, it was probably staged.
If you have more interest in the subject there's a chapter on it in 'Hatcher's Notebook'. Hatcher was a general in US Army Ordnance.
Hatcher is a must read for anyone interested in the subject. P.O. Ackley, a famous American gunsmith (ever heard of an Ackley Improved cartridge?) also conducted numerous blow-up tests. There can be several reasons, like ColoSwiss said. Early M1903 Springfield rifles had a reputation for blowing up as a result of poor heat treatment of the receiver. An '03 with a SN under 200,000 is not recommended to be fired. Other "blow ups" might not really be explosions. The Canadian Ross rifle had a widowmaker reputation because it was possible to reassemble the bolt in a way that it would chamber a round and fire, but not be locked, throwing the bolt straight back into the shooter's face. The website Forgottenweapons.com did a test, intentionally trying to get a bolt to go. They came damn close..... The owner of the gun store Sarco in NJ was killed several years ago by an M1895 Lee Navy 6mm throwing a bolt. it's also interesting to note weapons that have a reputation for being unkillable. Some of the blow up tests of Japanese Arisakas are interesting to read. They just won't go, even the "last ditch" Type 45's that look like someone made it in their basement. Actually that's where many were made....... These tests involve intentional bad rechambering, with massive powder loads that are totally unsafe. An Arisaka just won't blow up!
BTW, that website I mentioned is a great one. Lots of neat articles and videos. :tu:
-
-
I love Forgotten Weapons. While we're on the subject, anyone know what the heck this is?

-
Ordered Hatcher's Notebook at the local library (I think its the old, unrevised edition)...
-
Most blowups are the result of reloaded ammo. That's a big reason I don't do it.
I know a guy who claims to be an expert reloader who had the loading gate of his Japanese repro Winchester 1886 .45-70 blow off into his cheek. He swears up and down the reloads had nothing to do with it but I have the same gun and never had problems (and never used reloads). Who knows, but most blowups turn out to involve reloads.
-
Reloading is as safe or dangerous as the person make it. I re-check plenty of times to make sure I am not putting more powder than is required. It is when you get lazy or sloppy that mistakes happen.
-
@Chako said:
Reloading is as safe or dangerous as the person make it. I re-check plenty of times to make sure I am not putting more powder than is required. It is when you get lazy or sloppy that mistakes happen.Trying to watch tv while reloading, or having another beer, or just letting your mind wander.
Some years back I knew a man who had a bad reload in his 1911. Splintered the grips and blew the magazine out of the pistol. He said it felt like someone hit his hand with a baseball bat. Was afraid to let go of the pistol; thought some of his fingers might drop off also.
-
That 'Forgotten Weapons' site has some interesting stuff!

-
I remember before I married my wife she asked me if I would get rid of my guns. I told her that just would not happen. Now after 11 years she is a better shot then me. LOL!

Here is some in my collection.



My custom done SKS that had a attached grenade launcher with extended barrel. Did not need a grenade launcher so I had a master gunsmith in Safety Harbour remove it. Chromed the rifle. Trigger work done do it. Extended magazine release. Made it so magazine could be removed easily unlike all other SKS models. Fiber optic sights installed. Muzzle/flash suppressor, folding stock, etc, etc. Shoots like a dream.






This 12 gauge has been in our family since WW1

-
Nice collection!!!! Is that a T/C Renegade?
-
That 1897 is beautiful! The first really successful pump gun, another John Browning classic.
One of the neat things about those is that there is no trigger disconnect, so if you hold the trigger back it will fire as fast as you can work the slide. >:D The US Army issued those as the M1917 Trench Gun in both WWI and WWII. The M1917 had a shorter barrel, a perforated heat shield on the top of the barrel, and a bayonet mount for an M1917 Enfield bayonet. At close range it was a devastating weapon, and one the German government actually protested against, saying it was banned by the Hague and Geneva Conventions.As to shooting families, my mother and father met at a rifle match in high school. :D Both of them were certified NRA Expert in both smallbore and high power rifles........
-
@ColoSwiss said:
That 'Forgotten Weapons' site has some interesting stuff!
Doesn't it? He plays with some really neat toys. The Owen gun is a favorite of mine, and he also does an excellent video on how a Madsen machine gun works. It's complicated as all hell, almost an automatic Martini!
-
Nice collection. That SKS is definitely unique.
-
@jerseydevil said:
That 1897 is beautiful! The first really successful pump gun, another John Browning classic.
One of the neat things about those is that there is no trigger disconnect, so if you hold the trigger back it will fire as fast as you can work the slide. >:D The US Army issued those as the M1917 Trench Gun in both WWI and WWII. The M1917 had a shorter barrel, a perforated heat shield on the top of the barrel, and a bayonet mount for an M1917 Enfield bayonet. At close range it was a devastating weapon, and one the German government actually protested against, saying it was banned by the Hague and Geneva Conventions.As to shooting families, my mother and father met at a rifle match in high school. :D Both of them were certified NRA Expert in both smallbore and high power rifles........
Shot one while I was stationed at Ft. Benning and it is a blast (literally) to shoot.
-
There were a number of pump shotguns prior to the Winchester '97, including the 1882 Spencer (bottom in the photo with a '97 top). The Spencer had a weak lock-up and is generally considered unsafe nowadays.
Owens had an excellent reputation for reliability. The Ausies's later F1 is a mix of Owen and Sterling features, including the Owen's vertical magazine.
The Madsen machine gun is definately an odd animal, but about three dozen countries used it in one form or another in a dozen different calibers. It was probably the first light (relatively speaking) MG, with a bipod rather than a heavy tripod.



-
That 'Forgotten Weapons' site has some interesting stuff!

Doesn't it? He plays with some really neat toys. The Owen gun is a favorite of mine, and he also does an excellent video on how a Madsen machine gun works. It's complicated as all hell, almost an automatic Martini!
Absolutely correct. It was one of the first things my father taight me about the shotgun before he passed it on so many years ago.
-
Wish I could find a photo I took of my Browning Auto 5. Love shooting a semi automatic shotgun. But my dad borrowed it to teach my step mom since a 16 gauge has a bit less kick then a 12 gauge.
-
I've always wanted to try a Browning auto 5 but none have ever fit me, too short, aims high.
My favorite auto shotguns are the Benelli and the Winchester Super-X 1 (first generation). There is a cult around the latter.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





