How sharp is sharp for your multitool?
-
@duckman1975 said:
could you sharper knives using glass? Like the ones on soda bottles?Yes but not with great results . The rounded ( arised ) edges of a car side window are quite good at straightening an edge like a steel would do .
Dunc
-
Thanks, its the only smooth thing available in the field sometimes.
-
@micky d said:
snip
Anybody have a strop picture? Using leather belt do you have to be awhere of the angle?About one minute in mate :) http://www.youtube.com/watch?v=0a2Jm3pkXqk
This also shows the best way to sharpen a knife blade- a stone. There are stacks of sites on the web that show you how and once you have the idea even under the most extreme conditions you can find a flat stone to tone up a knife blade. Like the concrete wall/slab some one mentioned before. Use Sharp Makers and other kits by all means but stones are cheap enough so at least get an idea of how to use the basic and oldest sharpening tool. The satisfaction alone is worth it.
When sharpening it is critical to keep the angle right for the job the knife will be used for. It is worth getting a kiddies protractor just to note what the angle shape is.
I seem to remember there are 2 forms uses stropping with a leather, the use we need were we are just removing the bur as on that video shows the back of a belt will do. The propper stropping is done with jewelers rouge (I believe the red stuff is what they use) on one side and the other side left plain. Used by folks that use folding razors, the rouge side to sharpen the other to again remove the bur.
Talking of rouge, I bought a Benchmade Rescue Hook-
http://www.heinnie.com/cg6ch4645031/Knives/Benchmade/Benchmade-Rescue-Hook/p-92-111-625/
and in the instructions it sugested to use a cotton pajama cord coated with rouge to polish the hook to keep it sharp. Since then I have used that idea for sharpening serrated edges useing strands of wool about a foot long. I use enough strands to fill the slot, wet the strands put on some rouge and pollish up that size slot throughout the blade working it into the pointy bit, I then add or remove strands for the other size groove and repeat. You do not need to do it as often as you do keeping a flat blade sharp but it is a lot easier than using a ceramic rod that never quite fits.Dave
-
they are as sharp as I can get them with those carbide hand sharpeners.
-
Jewlers rouge is a bit too fine usually. There are many good polishing compounds out there. I prefer something called Yellowstone which is actually pink. They are usually made of various oxides. It seems there are state secrets about what some of these have in them. Some use waxy compounds to mix with the abrasive. They are excellent for putting that sharp polished razor edge on. They can be rubbed into a flat piece of leather or some material like denim. This is the way to go for a polished edge as opposed to a saw edge. A saw edge is better for cutting things like cord and rope. After many strops with polishing compound a bevel will begin to round and has to be reshaped some. The finest grit sharpening stone I have is a 2200 grit ceramic. You can get stones up to 8000 grit but they are expensive and stropping with a polishing compound is more economical and does the trick.
-
All mine will shave hair. An I carry touch up gear in my briefcase.
Chris
-
A little off topic, as everyone knows if you use your knife very often and on many unrecommended ways you will see scratches on the surface of the knife. I use a metal polish to remove them and bring back that shinney surface, are there a better way to do it?
-
Instead of thinking how sharp an edge is better to think in terms of the proper edge for the range of tasks the edge will be used for and the proper edge for those ranges of tasks. It's an engineering tradeoff thing.
-
All mine will shave hair. An I carry touch up gear in my briefcase.
Chris
A knife can shave hair and still not be properly sharp.
As long as you can shave hair along the complete length of the blade I would say that is sharp enough.
Not so Benner. A razor sharp mirror polished edge that is great for carving can be useless for cutting rope. You may actually prefer a coarse saw edge for that. The angle of the bevel and if it has a micro bevel etc are all important. Different types of edges serve different purposes. A straight razor has a very unique bevel.
-
All mine will shave hair. An I carry touch up gear in my briefcase.
Chris
A knife can shave hair and still not be properly sharp.
As long as you can shave hair along the complete length of the blade I would say that is sharp enough.
Not so Benner. A razor sharp mirror polished edge that is great for carving can be useless for cutting rope. You may actually prefer a coarse saw edge for that. The angle of the bevel and if it has a micro bevel etc are all important. Different types of edges serve different purposes. A straight razor has a very unique bevel.
I was only saying that was sharp enough for me and my needs.
-
Under a 20x stereo microscope you can see many different levels of shaving sharp but I swear I am not obsessed with sharpening. It's just not perfect till you reach the limits of the molecular micro structure of the steel you are sharpening and the limits to hold the edge based on the hardness/softness of the steel. I DO NOT have SOCD(sharpening obsessive-compulive disorder).
-
Since I got this thing:
http://scientificsonline.com/product.asp_Q_pn_E_3084061
I !!KNOW!! when an edge is right or not. People's hair and paper are different. The 3D image of an edge under an illuminated stereo microscope shows you what is going on with an edge. You KNOW when stropping has rounded the bevel and it needs to be dressed on a stone. It will show micro-serrations and curled feather edges. You will see nicks that need dressing. If you put a micro-bevel on the main bevel it will show it. I repeat I do NOT have a sharpening problem.
Now I will try to relax and stop hyperventilating. I'm fine. -
eeeeaaaaaasssssyyyy Trigger... :D
-
@FredKJ said:
Under a 20x stereo microscope you can see many different levels of shaving sharp but I swear I am not obsessed with sharpening. It's just not perfect till you reach the limits of the molecular micro structure of the steel you are sharpening and the limits to hold the edge based on the hardness/softness of the steel. I DO NOT have SOCD(sharpening obsessive-compulive disorder).After learning to sharpen with the sharpmaker I think I have SOCD, I want my knife sharp enought to be able to fillet a paper always. I terms of rope cutting, I could always use the serrated edge.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login