Wave Owners Club
-
The new wave has beefier plier heads and blades. It also has all-locking tools whereas the old wave only has locks on the outside blades.
Additionally, the tool complement outside the four main blades is quite different. The new wave has two bit drivers, whereas the old wave didn't have the bit slots and just gave you screwdrivers. I think the scissors on the knew wave are also smaller than the old wave?
This video might help you: https://www.youtube.com/watch?v=8AKGz_pL2Zk
-
Thanks very much!
Looking forward to eventually getting one of the "new" Waves soon....
-
I added a Wave to my growing collection. They had a 'kit' offered at Dick's Sporting Goods and I went for it at $89.95 with the double bit set and nylon sheath with flashlight pockets. Turned out they only had one in stock and the P3 Lenser flashlight was missing so the guy at the counter offered to take $10 off and I told him it needed to be $20 so I could buy the P3 light....He agreed :D so I'm in with the kit in stainless for $69.95US. I picked up the P3 light on Amazon and added the bit driver as well.
That set me off on a kick of buying the Squirt PS4 and the Juice CS4....it's a sickness...Now am waiting for my Maxpedition Fatty to come with UPS today.
-
@Pwscott said:
I added a Wave to my growing collection. They had a 'kit' offered at Dick's Sporting Goods and I went for it at $89.95 with the double bit set and nylon sheath with flashlight pockets. Turned out they only had one in stock and the P3 Lenser flashlight was missing so the guy at the counter offered to take $10 off and I told him it needed to be $20 so I could buy the P3 light....He agreed :D so I'm in with the kit in stainless for $69.95US. I picked up the P3 light on Amazon and added the bit driver as well.That set me off on a kick of buying the Squirt PS4 and the Juice CS4....it's a sickness...Now am waiting for my Maxpedition Fatty to come with UPS today.
We have all been there. It just gets worse so hold on!
Welcome to the forum by the way.
-
I can't believe my luck, got the following beauty off eBay for $36 shipped, with pristine leather sheath. The tool looks unused. Great condition. Given the low closing price I was expecting some horrible defect, but man, this was a steal; I can't believe my luck. :D


-
Great score NetsNJ
Mine was around the same price and also appeared unused. No sheath though, but that was fine with me.Sent from my XT901 using Tapatalk
-
@NetsNJ said:
I can't believe my luck, got the following beauty off eBay for $36 shipped, with pristine leather sheath. The tool looks unused. Great condition. Given the low closing price I was expecting some horrible defect, but man, this was a steal; I can't believe my luck. :D

Nice score NNJ

I got mine a couple weeks ago and I'm really liking it so far.
-
I've got to ask both Steve and NetsNJ: are your G1 Wave's handles loose or wobbly at the inside tools' end when closed? Mine has signicant play when closed. Just curious.
Sent from my XT901 using Tapatalk
-
In what direction? The handles stay firmly closed on mine. (It is stamped "Tool" not "USA" on the pliers, and I think they added some springs or something on these later ones to keep it closed?) There is some play up and down on the tool side handles in the up-down direction when closed (not the open-close direction if that makes sense). But my Rebar and Sidekick are the same on that front. All in all, my Wave is smooth but firm where you want it to be.
-
Yes, sorry. I should have specified direction. I meant up and down motion, not side to side (open/close). I don't remember the date of mine though. It's solid on all areas except that one issue when closed. Thanks for your reply

Sent from my XT901 using Tapatalk
-
Yes there is some play in mine. The handles are also slightly misaligned when closed.
-
I am really really loving this tool. I wish the new Wave had this tool load out (and no bit exchangers) with the beefier blades.
What do you guys think of the eyeglass screwdriver? It makes no sense to me on a multi-tool, none. (At least not taking up that much real estate!)
-
I agree ^
-
I agree to an extent. I don't need glasses (yet), so it loses some usefulness there. However, it can be good on small electronics I would think. Still, like you guys, I prefer the old Wave's loadout.
Sent from my XT901 using Tapatalk
-
I believe the eyeglass driver belongs on the juice or squirt line not on the full size. So I don't like it on the wave. It seems out of place. They really should replace it with an awl. It's the only thing the wave is missing.
-
Eyeglass screwdrivers are useful, but it just seems to take up so much (precious) space on the Wave for such a small item.
Has anyone seen mods where it is swapped for something else?
-
@NetsNJ said:
Eyeglass screwdrivers are useful, but it just seems to take up so much (precious) space on the Wave for such a small item.Has anyone seen mods where it is swapped for something else?
I'm sure they have. I think an awl would be a better choice myself. I wish the OG Wave had an awl instead of a can opener.....future mod maybe.
-
In my short time here, this is the only mod I've seen someone remove the mini driver. /topic/59081 I would take a shorter flat driver if that means I can get an awl.
-
@Demel said:
In my short time here, this is the only mod I've seen someone remove the mini driver. /topic/59081 I would take a shorter flat driver if that means I can get an awl.Check out the hacked leatherman club for many more examples. Also you can just make a shorter awl and keep the flat driver length.
-
In my short time here, this is the only mod I've seen someone remove the mini driver. /topic/59081 I would take a shorter flat driver if that means I can get an awl.
Check out the hacked leatherman club for many more examples. Also you can just make a shorter awl and keep the flat driver length.
Do you know which one? I did a quick seach through the thread and didn't see any. I'll keep looking. Do you think the awl from the signal will be short enough to replace the mini driver?
Edit: looks like reply #345 is a custom awl job
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login