Wave Owners Club
-
@NetsNJ said:
I can't believe my luck, got the following beauty off eBay for $36 shipped, with pristine leather sheath. The tool looks unused. Great condition. Given the low closing price I was expecting some horrible defect, but man, this was a steal; I can't believe my luck. :D

Nice score NNJ

I got mine a couple weeks ago and I'm really liking it so far.
-
I've got to ask both Steve and NetsNJ: are your G1 Wave's handles loose or wobbly at the inside tools' end when closed? Mine has signicant play when closed. Just curious.
Sent from my XT901 using Tapatalk
-
In what direction? The handles stay firmly closed on mine. (It is stamped "Tool" not "USA" on the pliers, and I think they added some springs or something on these later ones to keep it closed?) There is some play up and down on the tool side handles in the up-down direction when closed (not the open-close direction if that makes sense). But my Rebar and Sidekick are the same on that front. All in all, my Wave is smooth but firm where you want it to be.
-
Yes, sorry. I should have specified direction. I meant up and down motion, not side to side (open/close). I don't remember the date of mine though. It's solid on all areas except that one issue when closed. Thanks for your reply

Sent from my XT901 using Tapatalk
-
Yes there is some play in mine. The handles are also slightly misaligned when closed.
-
I am really really loving this tool. I wish the new Wave had this tool load out (and no bit exchangers) with the beefier blades.
What do you guys think of the eyeglass screwdriver? It makes no sense to me on a multi-tool, none. (At least not taking up that much real estate!)
-
I agree ^
-
I agree to an extent. I don't need glasses (yet), so it loses some usefulness there. However, it can be good on small electronics I would think. Still, like you guys, I prefer the old Wave's loadout.
Sent from my XT901 using Tapatalk
-
I believe the eyeglass driver belongs on the juice or squirt line not on the full size. So I don't like it on the wave. It seems out of place. They really should replace it with an awl. It's the only thing the wave is missing.
-
Eyeglass screwdrivers are useful, but it just seems to take up so much (precious) space on the Wave for such a small item.
Has anyone seen mods where it is swapped for something else?
-
@NetsNJ said:
Eyeglass screwdrivers are useful, but it just seems to take up so much (precious) space on the Wave for such a small item.Has anyone seen mods where it is swapped for something else?
I'm sure they have. I think an awl would be a better choice myself. I wish the OG Wave had an awl instead of a can opener.....future mod maybe.
-
In my short time here, this is the only mod I've seen someone remove the mini driver. /topic/59081 I would take a shorter flat driver if that means I can get an awl.
-
@Demel said:
In my short time here, this is the only mod I've seen someone remove the mini driver. /topic/59081 I would take a shorter flat driver if that means I can get an awl.Check out the hacked leatherman club for many more examples. Also you can just make a shorter awl and keep the flat driver length.
-
In my short time here, this is the only mod I've seen someone remove the mini driver. /topic/59081 I would take a shorter flat driver if that means I can get an awl.
Check out the hacked leatherman club for many more examples. Also you can just make a shorter awl and keep the flat driver length.
Do you know which one? I did a quick seach through the thread and didn't see any. I'll keep looking. Do you think the awl from the signal will be short enough to replace the mini driver?
Edit: looks like reply #345 is a custom awl job
-
That's been replaced with the (modified) awl from a Rebar now:
@hiraethus said:
Finally stuck the Rebar plier head onto my Wave. Doing a cable cut test (/post/1113037) convinced me that my modded Wave (+ Wingman scissors, small flat driver and awl) was superior to the Rebar for in almost every way - except for the cable cutters. Only had to modify the locking pin for the blade, shorten the small flat driver and clean up the back of the awl to make it fit. -
In my short time here, this is the only mod I've seen someone remove the mini driver. /topic/59081 I would take a shorter flat driver if that means I can get an awl.
Check out the hacked leatherman club for many more examples. Also you can just make a shorter awl and keep the flat driver length.
Do you know which one? I did a quick seach through the thread and didn't see any. I'll keep looking. Do you think the awl from the signal will be short enough to replace the mini driver?
Edit: looks like reply #345 is a custom awl job
Would the awl from the Signal be short enough? I'm going to guess yes. Kampfer got to handle one so maybe ask him.
Spoiler:
No small bit driver:
/post/952616No small bit driver with an awl:
/post/872292
/post/985958No small bit driver with large flat screwdriver:
/post/872656No small bit driver with both an awl and large flat driver:
/post/964025
/post/966173 v1.0
/post/1015595 v1.1
/post/1115256 v1.2A hacked awl:
/post/1109927A hacked awl I did:
/post/1015547
/post/1019377My hacked Charge:
/post/1016880 -
In my short time here, this is the only mod I've seen someone remove the mini driver. /topic/59081 I would take a shorter flat driver if that means I can get an awl.
Check out the hacked leatherman club for many more examples. Also you can just make a shorter awl and keep the flat driver length.
Do you know which one? I did a quick seach through the thread and didn't see any. I'll keep looking. Do you think the awl from the signal will be short enough to replace the mini driver?
Edit: looks like reply #345 is a custom awl job
Would the awl from the Signal be short enough? I'm going to guess yes. Kampfer got to handle one so maybe ask him.
Spoiler:
No small bit driver:
/post/952616No small bit driver with an awl:
/post/872292
/post/985958No small bit driver with large flat screwdriver:
/post/872656No small bit driver with both an awl and large flat driver:
/post/964025
/post/966173 v1.0
/post/1015595 v1.1
/post/1115256 v1.2A hacked awl:
/post/1109927A hacked awl I did:
/post/1015547
/post/1019377My hacked Charge:
/post/1016880I don't think so, IIRC that awl from Signal is pretty thick....
To replace mini driver with awl, you can get another can opener, grind it down to a pointy sharp awl, but leave the hook untouch (ask me how I learn), it will be short, but a functional awl. -
[quote author=Demel link=topic=21437.msg1140682#msg1140682 date=1440173671]
In my short time here, this is the only mod I've seen someone remove the mini driver. /topic/59081 I would take a shorter flat driver if that means I can get an awl.Check out the hacked leatherman club for many more examples. Also you can just make a shorter awl and keep the flat driver length.
Do you know which one? I did a quick seach through the thread and didn't see any. I'll keep looking. Do you think the awl from the signal will be short enough to replace the mini driver?
Edit: looks like reply #345 is a custom awl job
Would the awl from the Signal be short enough? I'm going to guess yes. Kampfer got to handle one so maybe ask him.
Spoiler:
No small bit driver:
/post/952616No small bit driver with an awl:
/post/872292
/post/985958No small bit driver with large flat screwdriver:
/post/872656No small bit driver with both an awl and large flat driver:
/post/964025
/post/966173 v1.0
/post/1015595 v1.1
/post/1115256 v1.2A hacked awl:
/post/1109927A hacked awl I did:
/post/1015547
/post/1019377My hacked Charge:
/post/1016880I don't think so, IIRC that awl from Signal is pretty thick....
To replace mini driver with awl, you can get another can opener, grind it down to a pointy sharp awl, but leave the hook untouch (ask me how I learn), it will be short, but a functional awl.
[/quote]
Have you done it? Any pictures? this seems like the most logical replacement for the driver.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



