firearms
-
@buck said:
I have a Walther TPH in .22LR that uses similarly designed magazines that rely on a plastic lip hanging onto the base. After years of intermittent back pocket carry the plastic lip crumbled off rendering it a single shot. Poor design if you ask me.Looking for a replacement magazine revealed they were rare and shockingly expensive in .22 but just the opposite for .25. I bought the .25 TPH magazine (and a spare) and cannibalized its baseplate onto my .22 magazine and now all is again well.
This Walther TPH .22 is always in my back pocket when in the boonies such as dove hunting. I can carry a bunch of ammo and could use it for signaling (I'm somewhat disabled) or punching cans if the hunt is a bust and I'm bored.
My Beretta 21 had a similar role. Snake gun these days.

-
I have a Walther TPH in .22LR that uses similarly designed magazines that rely on a plastic lip hanging onto the base. After years of intermittent back pocket carry the plastic lip crumbled off rendering it a single shot. Poor design if you ask me.
Looking for a replacement magazine revealed they were rare and shockingly expensive in .22 but just the opposite for .25. I bought the .25 TPH magazine (and a spare) and cannibalized its baseplate onto my .22 magazine and now all is again well.
This Walther TPH .22 is always in my back pocket when in the boonies such as dove hunting. I can carry a bunch of ammo and could use it for signaling (I'm somewhat disabled) or punching cans if the hunt is a bust and I'm bored.
My Beretta 21 had a similar role. Snake gun these days.

Very James Bond of you! Does it have the tip up barrel?
-
I have a Walther TPH in .22LR that uses similarly designed magazines that rely on a plastic lip hanging onto the base. After years of intermittent back pocket carry the plastic lip crumbled off rendering it a single shot. Poor design if you ask me.
Looking for a replacement magazine revealed they were rare and shockingly expensive in .22 but just the opposite for .25. I bought the .25 TPH magazine (and a spare) and cannibalized its baseplate onto my .22 magazine and now all is again well.
This Walther TPH .22 is always in my back pocket when in the boonies such as dove hunting. I can carry a bunch of ammo and could use it for signaling (I'm somewhat disabled) or punching cans if the hunt is a bust and I'm bored.
My Beretta 21 had a similar role. Snake gun these days.

Very James Bond of you! Does it have the tip up barrel?
But of course!!! 8) -
I had a nickel Beretta model 21 in the 80's. I remember killing a water moccasin on the road bridge onto our salt marsh island where we hunted ducks back then. I used CCI snake shot and it did the job though it would not cycle the next round which was ok for that gun with the tip up barrel.
I couldn't barely see the teeny sights and therefore couldn't hit dodo with it.
-
@buck said:
I had a nickel Beretta model 21 in the 80's. I remember killing a water moccasin on the road bridge onto our salt marsh island where we hunted ducks back then. I used CCI snake shot and it did the job though it would not cycle the next round which was ok for that gun with the tip up barrel.I couldn't barely see the teeny sights and therefore couldn't hit dodo with it.
Their recoil spring is pretty heavy...mine won't cycle snake shot either which is probably normal. My 21 sights are exactly on at about 3 feet which is perfect for snakes...I have to sit the whole front blade in the rear notch to hit out at about 10 yards. Had this one about 25 years. my Ex has a Mod 20 in 25ACP that I got her back in the early 80's. Never a problem with either one. My MIL's Sterling 25 cracked a plastic mag baseplate about 15 years ago....I was able to find one online and replace it for her.
-
-
-
I am not that great of a videographer. I did take my little Canon G12 to the IPSC competition today, and decided to try showing you what the two Stage Houses looked like. So here is the video showing you the Stage 2 House.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
And the last video...here is the stage 5 house.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Just got a Norinco 1911 through the door.
It came with a 7 and 8 round magazine. I assumed they were both going to be 7 round mags. I also got 2 7 round Kimbers. In this photo, the 7 rounder is a Kimber. The Norinco is identical except for the 45 ACP stamping on the side, and the base palate saying Kimber.

Tomorrow, I have to figure out how to take it apart and clean it well.
-

Congrats!
-
Thanks. The holster I bought doesn't fit the Norinco. I can't seem to figure exactly why other than it doesn't seem wide enough at the trigger guard. Got to take a closer look at that tomorrow.
Anyhow, I do have another holster on tap from eBay. Here are my current 6 mags and their Uncle Mike mag carriers.
-
Looks the business Dan. 8)
-
I'd say your collection just go a bit safer now Dan :D
Sent from my K013 using Tapatalk
-
Nah. The pair of guard cats are always on duty.

-
Here are a few of mine:
CZ-82, an ex-Czech police pistol in 9 mm Mak:

Rugby SP-101, in .357 Magnum, with laser grips:

Remington 788, in 6mm Remington:

Steven 12 ga. pump shotgun, from the early 20th century. This one put rabbits on the table for my family, back in the 1930s:

-
Those are very nice Smaug. I think my next purchase down the road will be a 357 magnum revolver.

-
Nice
I kinda like that rugby!
JR -
Great line-up Smaug.

-
Well I finally got around to cleaning the Norinco 1911A1. I looked at the manual, and although it was in fairly good English with only a few spelling errors, I really needed to find a pictorial walk through on field stripping.
Armed with a pictorial guide I commenced my dissasembly...
First have to turn the barrel bushing clockwise 90 degrees. Now I first attempted to use a pair of tweezers to push down on the spring but that didn't work. I then attempted to use the flat part of the handle to push down and give me enough clearance to turn the bushing. That worked perfectly. I was also thinking maybe next time, I can take out my specialized 1911 multi-tool from the collection and give that a whirl. Anyways, continuing to apply downward pressure, gently pull up until the spring isn't fighting you back.
Now with the spring removed, it is a matter of racking the slide until you get to a small dis-assembly notch. This allows you to pull out the slide lock pin assembly. Now with that off, you can rack the slide until it is completely off. Now flip the slide over, and remove the spring base after moving the bushing the other way to remove that part, and the barrel. Now done field stripping the handgun for cleaning.
There was a lot of oil...but nothing like my SKS full of cosmoline. Now that was a mess! All I did was gently wipe down the interior of excess oil. I also ran the brush through the barrel and made sure there wasn't any excess oil inside the barrel.
Now, I have read whatever I could about Norinco 1911s, and the common grip is that the interior of the slide etc is excessively rough. I was prepared to see something hacked away once I opened it up, but was pleasantly surprised at the interior. It doesn't appear to be all that bad. Mind you, maybe folks are prone to exaggerations online.
It isn't as smooth as it could be, but nowhere near as bad as I was led to believe after reading a few submissions in various online forums.
Here is the extended mag release.
And a shot showing the beaver tail, hammer, and rear of the slide.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




































