firearms
-
Great line-up Smaug.

-
Well I finally got around to cleaning the Norinco 1911A1. I looked at the manual, and although it was in fairly good English with only a few spelling errors, I really needed to find a pictorial walk through on field stripping.
Armed with a pictorial guide I commenced my dissasembly...
First have to turn the barrel bushing clockwise 90 degrees. Now I first attempted to use a pair of tweezers to push down on the spring but that didn't work. I then attempted to use the flat part of the handle to push down and give me enough clearance to turn the bushing. That worked perfectly. I was also thinking maybe next time, I can take out my specialized 1911 multi-tool from the collection and give that a whirl. Anyways, continuing to apply downward pressure, gently pull up until the spring isn't fighting you back.
Now with the spring removed, it is a matter of racking the slide until you get to a small dis-assembly notch. This allows you to pull out the slide lock pin assembly. Now with that off, you can rack the slide until it is completely off. Now flip the slide over, and remove the spring base after moving the bushing the other way to remove that part, and the barrel. Now done field stripping the handgun for cleaning.
There was a lot of oil...but nothing like my SKS full of cosmoline. Now that was a mess! All I did was gently wipe down the interior of excess oil. I also ran the brush through the barrel and made sure there wasn't any excess oil inside the barrel.
Now, I have read whatever I could about Norinco 1911s, and the common grip is that the interior of the slide etc is excessively rough. I was prepared to see something hacked away once I opened it up, but was pleasantly surprised at the interior. It doesn't appear to be all that bad. Mind you, maybe folks are prone to exaggerations online.
It isn't as smooth as it could be, but nowhere near as bad as I was led to believe after reading a few submissions in various online forums.
Here is the extended mag release.
And a shot showing the beaver tail, hammer, and rear of the slide.
-
Hard to beat a Rugby when you find yourself in a scrum.
-
I have a question for you folks. I bought a Blade Tech Total Eclipse 1911 holster. It fits my Winchester BB gun like a glove. I was sure I was good to go. However, the Norinco 1911a1 does not fit it. I thought it was as simple as unscrewing the adjustment screw, but I quickly found out that the holster is riveted at the belt loops. This means I cannot open the holster more than it is designed to. So I guess I am down one holster. I have an other on tap from eBay, and I hope that one fits properly.
So here is my question. Is there a dimensional difference between a 1911 and a 1911a1? Here is a photo showing both my Wincherster BB 1911 and the Norinco 1911a1.
You can see that the slide is deeper on the Norinco. Also the gun is a little wider on average compared to the very thin BB 1911. Whatever my fitment issues are, it just won't fit into the BladeTech Total Eclipse. Talk about that bad luck streak again.
-
No. Absolutely no dimensional difference between the 1911 and 1911A1. Your new gun is a "tricked out" or customized pistol and those often don't fit all std holsters.
-
That makes sense. I just assumed they would all fit. Ah well...going down to the local gun shop to see if something will fit. Problem being, i can't just take it down there for a fitment...as I would have to apply for an ATT. I can take the handgun back and forth to my home and range however..sigh.

This should not be an issue starting September 2nd when the ATT restrictions will be loosened.
-
@Chako said:
That makes sense. I just assumed they would all fit. Ah well...going down to the local gun shop to see if something will fit. Problem being, i can't just take it down there for a fitment...as I would have to apply for an ATT. I can take the handgun back and forth to my home and range however..sigh.
This should not be an issue starting September 2nd when the ATT restrictions will be loosened.
Usually, (in the past anyway) holster fit problems involve the higher, wider sights on the customs.
For example, look at my pistol......
/post/1139202
Those are std 1911A1 sites....the new ones are a bit taller but yours are adjustable combat sights and are much larger.
-
Thanks for the info. Much appreciated.

-
If you don't plan to return the holster because of mail costs or whatnot you could break out the heat gun or pop the rivets.
-
That is an idea.
-
Took the Norinco 1911 and shot two boxes of 45 ACP using the various magazines that I have. I even bought a 10 rounder earlier today. Everything worked very well.
-
Whit this whole of tiny Springs and easy to lost parts these pistol haves, im a bit glad germany dosnt alows its citicen tho own such a shoot device ..
I was not bad in building kinder surprise egs toys (something which is forbidden in the US, something which confuse me a bit: guns arend a problem, but toys in shokolade are very evil in good old america..) -
Ok, here are the results. My first shots with the 1911...surprisingly enough, I was on target at a good distance of 25 yards. I was aiming for the center. I noticed I was shooting low and to the left a little...
Then I made some adjustments and I was mostly there.
All in all, I am strongly tempted to compete in IPSC with the 1911. I did buy a BlackHawk Serpa CQC Concealment holster that fits.
Oh forgot to say, a 45 makes nice holes. :D
-
On 1911 disassembly, use the extended toe on the base of the magazine to depress the spring guide before attempting to turn the barrel bushing.
That used to be Army SOP, but I can't find any current mention of it, let alone a photo. The 1911 was designed to be detail stripped down to its last part using only a screwdriver.
-
@ColoSwiss said:
On 1911 disassembly, use the extended toe on the base of the magazine to depress the spring guide before attempting to turn the barrel bushing.That used to be Army SOP, but I can't find any current mention of it, let alone a photo. The 1911 was designed to be detail stripped down to its last part using only a screwdriver.
Don't you mean "field stripped"? You need a punch to take off the mainspring housing and to push out hammer/sear pins.
-
On 1911 disassembly, use the extended toe on the base of the magazine to depress the spring guide before attempting to turn the barrel bushing.
That used to be Army SOP, but I can't find any current mention of it, let alone a photo. The 1911 was designed to be detail stripped down to its last part using only a screwdriver.
Don't you mean "field stripped"? You need a punch to take off the mainspring housing and to push out hammer/sear pins.
No, 'detail strip'. Here's a demo film that uses an empty cartridge case to remove the grip screws (instead of a screwdriver), and no other tools. Instead you use parts from the pistol to remove other parts.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-

I stand corrected but will add that brand new Colt pistol pins are not that easy to push out and since I've never owned a pistol that old, was unaware that this could be done.

-
I detail stripped several old ex-GI 1911s. On newer guns the only step I did beyond field stripping, was to remove the firing pin and extractor.
Never underestimate John Browning.

-
@Chako said:
Those are very nice Smaug. I think my next purchase down the road will be a 357 magnum revolver.
If you handload, (and you should, if it's legal up there) a revolver is wonderful. No need to run around collecting brass.
Also, if you handload, get yourself a 44 Magnum or 45 Colt instead of 357 with the longer barrel. For target shooting, you can load them light, and they only kick about the same as a 38 Special, but with nice big holes.
When you load them up to full magnum potential, they're capable of taking bigger game. (which you have plenty of, up north!)
Lastly, there are some sweet lever action rifles available in both of those old calibers, which boost velocities by 400 fps, compared to from a long revolver barrel. If you have a 240 gr. bullet going around 1900 fps that is a great big game load out to about 100 yards. (or meters)
I shoot about one box of magnums for every 5 boxes of "light specials."
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login











