And so it begins.... (My adventures into Alox!)
-
Great looking scales.

-
-
I like the looks of those scales Syph

-
Bob,
we had a few email exchanges, but I'm so far off from knowing what I want exactly, I'm not going to further take your time with emails about quotes. I had seen your thread on bladeforums, but only yesterday found this more elaborate one. I went through the last 25 pages and man you are a wizard! I prefer the 93 mm SAK's myself, but everything looks so good.
Anyway, in another thread someone challenged me to do my own mod. So I got the idea to buy a swisschamp and put together several different configurations over the course of a year and see what I really want/need in an EDC.
So to the question: when you make 91 mm SAK's with cellidor scales, do you use the same screw type pivots as on the 93 mm SAK's? Or do you peen them?
Main question is, do you have a source for the bushes? I fear that I might damage them with the drilling.
Totally unrelated question. You said the combo tool is too thin to be a good pry tool. So what's the better pry tool, the 93 mm inline awl or the cap lifter?
Finally, I'd also like to see the bit driver on 93 mm SAK's but without the bit holder. That with the two saws and the pliers in a sheath with a couple of large bit holders, would be nice for when I'm out of office in the field or doing chores at home. So not an EDC, but a small tool chest for when you don't know what the day will bring.
-
Hi, yes I peen the regular cellidor ones and sometimes the bushing do get damaged, or in my case more often lost. I have hundreds of spares now though from years of taking SAKs apart. If you need any you are welcome to have some for cost of shipping, which I would think is just the cost of an international letter.
The 93mm caplifter is for sure the best pry tool of the standard components. It will bend too, but it takes alot of force. :D
I have a cybertool bit driver that has no bit holder with it or bits. I got that from a used CT model ages ago and the driver was the only part worth salvaging. Id always intended to put that on a 93mm SAK but just never got around to it.

-
My dream SAK keeps changing but if I had to decide right now, it would be similar to a Swisschamp with added Electrician blade. I've always admired that blade and know I would find it extremely useful. I also have occassion to work in my yard and might benefit from a pruner blade as well. Oh the possibilities :ahhh :ahhh :D
-
Question: on a normal scaled 91mm sak, can the inline phillips be opposite side of both the can opener and bottle opener? For example with the explorer removing the mag glass and putting the two openers in its place? I'm sorry if this has been answered already, I think it's been hinted at, but not directly asked. Thanks
-
@Demel said:
Question: on a normal scaled 91mm sak, can the inline phillips be opposite side of both the can opener and bottle opener? For example with the explorer removing the mag glass and putting the two openers in its place? I'm sorry if this has been answered already, I think it's been hinted at, but not directly asked. ThanksNo. The springs are different so the possibility will not work.
-
I admire those who know what their perfect SAK is. I cannot for the life of me decide either so I carry a Swisschamp as a result :D. I love the diamond plate Ti scales

-
Question: on a normal scaled 91mm sak, can the inline phillips be opposite side of both the can opener and bottle opener? For example with the explorer removing the mag glass and putting the two openers in its place? I'm sorry if this has been answered already, I think it's been hinted at, but not directly asked. Thanks
No. The springs are different so the possibility will not work.
Thank you that helps alot.

-
So I went through the entire thread for inspiration. I think I know the tool layout, but I got some more questions.
- Is the cadet nail file usable as a screwdriver? Or is it too weak? Could you shape it like a big version of the classic SD nailfile?
- Have you ever made a 93 mm with black scales, springs, liners, pivots and screws, but stainless tools? Would love to know if it looks as good as I think.
- Did I understand correctly that you make the electrician blade yourself? So you could make a regular sheepsfoot.
- In one post you were contemplating either the large blade serrated, or the small, and the other plain. What did you decide on and why?
- You showed a graph of Ti color vs voltage. But there was no black in there. How does Fisher make their black Ti bullet pens? Can you make black Ti?
Thanks
-
- Regarding the bit driver in 93mm SAKs, could you make one that fits the bits I already own? Instead of using the Vic bit driver. No bit holder required.
- What's the maximum number of layers in a 93 mm?
-
I believe I just saw that two thin tools opposite the large blade are possible. Would combo tool and 93mm awl be possible to put on the same layer with the main blade? (in that case, I'd have my 'perfect' setup...)
-
- Ti does not anodize black. The ones fisher does have a special coating added to it. I've tried everything I know and only a couple possibilities work. Have it zirc coated, dlc coated, cerakote. One other method works but that is one I'm still working on ;). Hope Syph doesn't mind me answering that one :)
-
So they cheat. Thanks for answering.
-
- Is the cadet nail file usable as a screwdriver? Or is it too weak? Could you shape it like a big version of the classic SD nailfile?
I think that would probably work ok. - Have you ever made a 93 mm with black scales, springs, liners, pivots and screws, but stainless tools? Would love to know if it looks as good as I think.
Yes I have but cant remember what number build that was. I have black scales and liners for 91s and 93s. - Did I understand correctly that you make the electrician blade yourself? So you could make a regular sheepsfoot.
Ive made some from 91mm main blades, but most of the ones I use are from electricians. - In one post you were contemplating either the large blade serrated, or the small, and the other plain. What did you decide on and why?
I would choose large serrated and small plain. I rarely need a larger blade for normal knife work. If you need a serrated blade for rope cutting etc, you'd want it big. - You showed a graph of Ti color vs voltage. But there was no black in there. How does Fisher make their black Ti bullet pens? Can you make black Ti?
I would bet black DLC. Thats the best way to make a uniform deep black color. - Regarding the bit driver in 93mm SAKs, could you make one that fits the bits I already own? Instead of using the Vic bit driver. No bit holder required.
I am working on making one for 1/4 bits, but there are 2 issues. its VERY wide, so I think Id do it like the 93mm saks do the marlin spike. Making the hex cutout is not easily done with tools I have. - What's the maximum number of layers in a 93 mm?
There is no limit to the number, but what Ive learned is that if you go thick you need full liners every 4 or so layers to keep the frame strength up.
- Is the cadet nail file usable as a screwdriver? Or is it too weak? Could you shape it like a big version of the classic SD nailfile?
-
I guess this thread is now mostly my adventures in Ti converted 91s... :D
I got to tackle a new issue though on this build. Can the phillisp be put on the back of the dual saw layer. And yes, yes it can!
I milled some off each side though to thin it down. I kind of looks like a leatherman phillips now.




Snap is good too. I used a piece off a corkscrew as the filler to support the other spring not used by the phillips driver.
And the rest of the pics...




-
Thats a cool configuration.
-
Pretty sweet mod Syph.
It's basically a Ti Ranger with the Philips in place of the fine driver. Very cool.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login