And so it begins.... (My adventures into Alox!)
-
@Demel said:
Question: on a normal scaled 91mm sak, can the inline phillips be opposite side of both the can opener and bottle opener? For example with the explorer removing the mag glass and putting the two openers in its place? I'm sorry if this has been answered already, I think it's been hinted at, but not directly asked. ThanksNo. The springs are different so the possibility will not work.
-
I admire those who know what their perfect SAK is. I cannot for the life of me decide either so I carry a Swisschamp as a result :D. I love the diamond plate Ti scales

-
Question: on a normal scaled 91mm sak, can the inline phillips be opposite side of both the can opener and bottle opener? For example with the explorer removing the mag glass and putting the two openers in its place? I'm sorry if this has been answered already, I think it's been hinted at, but not directly asked. Thanks
No. The springs are different so the possibility will not work.
Thank you that helps alot.

-
So I went through the entire thread for inspiration. I think I know the tool layout, but I got some more questions.
- Is the cadet nail file usable as a screwdriver? Or is it too weak? Could you shape it like a big version of the classic SD nailfile?
- Have you ever made a 93 mm with black scales, springs, liners, pivots and screws, but stainless tools? Would love to know if it looks as good as I think.
- Did I understand correctly that you make the electrician blade yourself? So you could make a regular sheepsfoot.
- In one post you were contemplating either the large blade serrated, or the small, and the other plain. What did you decide on and why?
- You showed a graph of Ti color vs voltage. But there was no black in there. How does Fisher make their black Ti bullet pens? Can you make black Ti?
Thanks
-
- Regarding the bit driver in 93mm SAKs, could you make one that fits the bits I already own? Instead of using the Vic bit driver. No bit holder required.
- What's the maximum number of layers in a 93 mm?
-
I believe I just saw that two thin tools opposite the large blade are possible. Would combo tool and 93mm awl be possible to put on the same layer with the main blade? (in that case, I'd have my 'perfect' setup...)
-
- Ti does not anodize black. The ones fisher does have a special coating added to it. I've tried everything I know and only a couple possibilities work. Have it zirc coated, dlc coated, cerakote. One other method works but that is one I'm still working on ;). Hope Syph doesn't mind me answering that one :)
-
So they cheat. Thanks for answering.
-
- Is the cadet nail file usable as a screwdriver? Or is it too weak? Could you shape it like a big version of the classic SD nailfile?
I think that would probably work ok. - Have you ever made a 93 mm with black scales, springs, liners, pivots and screws, but stainless tools? Would love to know if it looks as good as I think.
Yes I have but cant remember what number build that was. I have black scales and liners for 91s and 93s. - Did I understand correctly that you make the electrician blade yourself? So you could make a regular sheepsfoot.
Ive made some from 91mm main blades, but most of the ones I use are from electricians. - In one post you were contemplating either the large blade serrated, or the small, and the other plain. What did you decide on and why?
I would choose large serrated and small plain. I rarely need a larger blade for normal knife work. If you need a serrated blade for rope cutting etc, you'd want it big. - You showed a graph of Ti color vs voltage. But there was no black in there. How does Fisher make their black Ti bullet pens? Can you make black Ti?
I would bet black DLC. Thats the best way to make a uniform deep black color. - Regarding the bit driver in 93mm SAKs, could you make one that fits the bits I already own? Instead of using the Vic bit driver. No bit holder required.
I am working on making one for 1/4 bits, but there are 2 issues. its VERY wide, so I think Id do it like the 93mm saks do the marlin spike. Making the hex cutout is not easily done with tools I have. - What's the maximum number of layers in a 93 mm?
There is no limit to the number, but what Ive learned is that if you go thick you need full liners every 4 or so layers to keep the frame strength up.
- Is the cadet nail file usable as a screwdriver? Or is it too weak? Could you shape it like a big version of the classic SD nailfile?
-
I guess this thread is now mostly my adventures in Ti converted 91s... :D
I got to tackle a new issue though on this build. Can the phillisp be put on the back of the dual saw layer. And yes, yes it can!
I milled some off each side though to thin it down. I kind of looks like a leatherman phillips now.




Snap is good too. I used a piece off a corkscrew as the filler to support the other spring not used by the phillips driver.
And the rest of the pics...




-
Thats a cool configuration.
-
Pretty sweet mod Syph.
It's basically a Ti Ranger with the Philips in place of the fine driver. Very cool.
-
@Syph007 said:
I guess this thread is now mostly my adventures in Ti converted 91s... :DI got to tackle a new issue though on this build. Can the phillisp be put on the back of the dual saw layer. And yes, yes it can!
I milled some off each side though to thin it down. I kind of looks like a leatherman phillips now.

Fantastic work as always Syph.

I think matching the liner cutout to the scale shape at the end would have been a nice visual touch and improved the access.
Ever thought of flattening the pocket clip screws a little?
-
Nice job Syph!
Sent from my SM-G920R4 using Tapatalk
-
@zoidberg said:
Fantastic work as always Syph.
I think matching the liner cutout to the scale shape at the end would have been a nice visual touch and improved the access.
Ever thought of flattening the pocket clip screws a little?
Ive never thought much about the screws on the clips, I just use what comes with them. I suppose I could use countersunk flat head type though.
I like the idea of matching the scale shape good call. It was a bit ad hoc anyhow as I was building it, then realized there was no way to open it, so I had to make that cutout.
-
On the one I've just done, I opened the curve of the liners up slightly so it's accessible from the end, however mine is captive both sides, so opening the corkscrew first doesn't help like it does in this one.
Just as an aside, I've got an old Sheffield knife which has the rebate all the way along to house a corkscrew, phillips, awl, and something else (forgot) :P It kind of makes me wonder if you need any of that liner wall there or if you could open it up to follow the entire scale cut out, not just the end profile (it's the knife that gave me the inspiration to put both c/s and Phillips on my mod)
-
Love that latest mod Syph - Brilliant/inspired/fabulous execution as always....
Good ideas from 50 + Z on the liners ....And will stop the perennial MTo Cs vs Ph arguments - Have both.... :D :o
This, I believe, is a much better option than the backspring fine screwdriver and chisel - One of which is redundant, and one pretty much unusable !! .....So do we now know the mystery tool you were working on? - That we were all going nuts about, a page or so ago...
It's the mid knife backspring Phillips ??Or is it the bit driver you mention above?....
Or yet another wonder idea???
-
@Huntsman said:
Love that latest mod Syph - Brilliant/inspired/fabulous execution as always....
Good ideas from 50 + Z on the liners ....And will stop the perennial MTo Cs vs Ph arguments - Have both.... :D :o
This, I believe, is a much better option than the backspring fine screwdriver and chisel - One of which is redundant, and one pretty much unusable !! .....So do we now know the mystery tool you were working on? - That we were all going nuts about, a page or so ago...
It's the mid knife backspring Phillips ??Or is it the bit driver you mention above?....
Or yet another wonder idea???
That wasn't it, you'll know when you see it. ;)
-
@Huntsman said:
This, I believe, is a much better option than the backspring fine screwdriver and chisel - One of which is redundant, and one pretty much unusable !!Huntsman - I'm curious as to which is which (in your humble opinion of course). I've never had an SAK with either, but always include the technicians driver back tool when thinking about my perfect 91mm (speculating that it will be really handy)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login