firearms
-

I stand corrected but will add that brand new Colt pistol pins are not that easy to push out and since I've never owned a pistol that old, was unaware that this could be done.

-
I detail stripped several old ex-GI 1911s. On newer guns the only step I did beyond field stripping, was to remove the firing pin and extractor.
Never underestimate John Browning.

-
@Chako said:
Those are very nice Smaug. I think my next purchase down the road will be a 357 magnum revolver.
If you handload, (and you should, if it's legal up there) a revolver is wonderful. No need to run around collecting brass.
Also, if you handload, get yourself a 44 Magnum or 45 Colt instead of 357 with the longer barrel. For target shooting, you can load them light, and they only kick about the same as a 38 Special, but with nice big holes.
When you load them up to full magnum potential, they're capable of taking bigger game. (which you have plenty of, up north!)
Lastly, there are some sweet lever action rifles available in both of those old calibers, which boost velocities by 400 fps, compared to from a long revolver barrel. If you have a 240 gr. bullet going around 1900 fps that is a great big game load out to about 100 yards. (or meters)
I shoot about one box of magnums for every 5 boxes of "light specials."
-
I only have the capability of hand loading 9mm right now. I plan to buy another Dillon Square Deal B down the road and set it up for 45 APC. I do have a Single Action Army in 45 Colt...and I would love to be able to hand load those as well. I have collected all my brass so far.
-
@Chako said:
I only have the capability of hand loading 9mm right now. I plan to buy another Dillon Square Deal B down the road and set it up for 45 APC. I do have a Single Action Army in 45 Colt...and I would love to be able to hand load those as well. I have collected all my brass so far.Just buy another cylinder in 45ACP to fit your SA revolver.......one less caliber to load for.
-
Those are very nice Smaug. I think my next purchase down the road will be a 357 magnum revolver.

If you handload, (and you should, if it's legal up there) a revolver is wonderful. No need to run around collecting brass.
Also, if you handload, get yourself a 44 Magnum or 45 Colt instead of 357 with the longer barrel. For target shooting, you can load them light, and they only kick about the same as a 38 Special, but with nice big holes.
When you load them up to full magnum potential, they're capable of taking bigger game. (which you have plenty of, up north!)
Lastly, there are some sweet lever action rifles available in both of those old calibers, which boost velocities by 400 fps, compared to from a long revolver barrel. If you have a 240 gr. bullet going around 1900 fps that is a great big game load out to about 100 yards. (or meters)
I shoot about one box of magnums for every 5 boxes of "light specials."
I just bought another couple of boxes of cowboy loaded 44 Specials for my Winchester Trapper.

-
Sound advice SG.
This reminds me I still need a SA Revolver in my collection. Something that rhymes with booger I think.
-
I only have the capability of hand loading 9mm right now. I plan to buy another Dillon Square Deal B down the road and set it up for 45 APC. I do have a Single Action Army in 45 Colt...and I would love to be able to hand load those as well. I have collected all my brass so far.
Just buy another cylinder in 45ACP to fit your SA revolver.......one less caliber to load for.
Like this birdshead Vaquero? Mine is 45ACP but they also make 45Colt and dual cylinder. It has some recoil but you can always shoot light target ACP ammo (or 45 Schofield in the other cylinder which is akin to 44 Special or Russian).
I think they also make one in 22LR/22Mag.

-
I only have the capability of hand loading 9mm right now. I plan to buy another Dillon Square Deal B down the road and set it up for 45 APC. I do have a Single Action Army in 45 Colt...and I would love to be able to hand load those as well. I have collected all my brass so far.
Just buy another cylinder in 45ACP to fit your SA revolver.......one less caliber to load for.
Like this birdshead Vaquero? Mine is 45ACP but they also make 45Colt and dual cylinder. It has some recoil but you can always shoot light target ACP ammo (or 45 Schofield in the other cylinder which is akin to 44 Special or Russian).
I think they also make one in 22LR/22Mag.

+1!!! I have a couple in 22lr/22mag. Fine revolvers. A 45ACP sixgun is on my want list.
-
Just got in a picatinny mount that fits over the magazine tube. This gives me 3 separate rails, which I wanted to mount a flashlight to my 14" Hatsan 12 gauge.
This works very nicely.
In fact, it places the light end switch within easy reach of my right hand.
And here is the 14" Hatsan and the Savage Axis II 30.06. I have taken the Hatsan out several times now to the range, and I love this little shotgun. It eats everything I have given it so far.

-
You have all the cool stuff Chako!!! :D
-
My favorite SA. Ruger Bisley 45 Colt. John Linebaugh did the mod's to it. You can get a 325 grain bullet 1200+ with a health dose of H110. That aint Casull level but it aint cowbot action loads either. :D
-
-
Congrats! I feel like I have watched your shooting sports addiction start from the beginning....... Oh wait I did. :D Really happy for you bud.

-
Yeah. I just finished re-reading all my posts in this thread...which I may add, was the impetus to get my PAL. It has been quite the ride.

-
That's great bud!!!!!!!!!!!!!!

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login







