What did you just get?
-
@MadPlumbarian said:
The belt I ordered came in today! :D I must say this bad boy is heavy! I took a few pics and put them into a collage cause it's just easier, but if you see one pic or are interested in one just let me know and I'll just post that pic.. So a few things about this belt, it's heavy, it's stiff, it's stitched everywhere, and that pocket is sewn in, but not completely, the top and bottom are lose, the sides are what are stitched. It definetly needs to be broken in! I took a few other pics along with my other belts to give an idea on size wise, three are the same size at 1-1/8", the next two are 1-1/2", and lastly that new one is 1-3/4"! All five of the others are by Bison, and that new one is by S.O.Tech, all six to be American made! One thing I did notice is on the bottom between the buckle and the loop, there is a red stitch, kinda as if the stitching was to give way it's a warning to say, don't even think of using it! Other then that I think I did good?
JR


What a NICE collection of belts you have there. As for me, I have had the absolute WORST luck with belts. I tend to buy what I think will be quality but before I know it, it's all twisted/torn/tattered to hell! Maybe I need to change up and buy some like yours. How do you find them holding up for you?
-
The belt I ordered came in today! :D I must say this bad boy is heavy! I took a few pics and put them into a collage cause it's just easier, but if you see one pic or are interested in one just let me know and I'll just post that pic.. So a few things about this belt, it's heavy, it's stiff, it's stitched everywhere, and that pocket is sewn in, but not completely, the top and bottom are lose, the sides are what are stitched. It definetly needs to be broken in! I took a few other pics along with my other belts to give an idea on size wise, three are the same size at 1-1/8", the next two are 1-1/2", and lastly that new one is 1-3/4"! All five of the others are by Bison, and that new one is by S.O.Tech, all six to be American made! One thing I did notice is on the bottom between the buckle and the loop, there is a red stitch, kinda as if the stitching was to give way it's a warning to say, don't even think of using it! Other then that I think I did good?
JR


What a NICE collection of belts you have there. As for me, I have had the absolute WORST luck with belts. I tend to buy what I think will be quality but before I know it, it's all twisted/torn/tattered to hell! Maybe I need to change up and buy some like yours. How do you find them holding up for you?
I have a rubber belt from alchemy goods. It's two old bicycle inner tubes stitched together. While it takes a little getting used to because the rubber can be grippy, it's the most comfortable, durable belt I've worn to date. All I've worn for the past three years. It's great because you set it, and since it's rubber, if you squat or strain against it, it'll stretch just enough that you're always comfortable.
I also wear it as it's my only belt for belt buckles, and I have one my dad gave to me I'd wanted to use.
-
My Blast arrived today after a two week turnaround from leatherman warranty . The file was worn out and they installed a new one.
-
With the risk of making this a belt-thread... Just like SAKnight, I'm wearing a belt that stretches - there's actually quite a bit of elasticity to it, so you just set it once and no matter what you do, it conforms to your body. Best belt I've ever had.
I've never understood how people can wear ordinary leather belts all day; most of them are pretty stiff and you've only got so many possible holes for the split-thingy. If one hole is a bit too tight and the next is a bit too loose, you're screwed.To stay on topic, I haven't received any goodies in a while, but got a few things on the way - among them, a small prybar, for my keychain. :-)
-
The belt I ordered came in today! :D I must say this bad boy is heavy! I took a few pics and put them into a collage cause it's just easier, but if you see one pic or are interested in one just let me know and I'll just post that pic.. So a few things about this belt, it's heavy, it's stiff, it's stitched everywhere, and that pocket is sewn in, but not completely, the top and bottom are lose, the sides are what are stitched. It definetly needs to be broken in! I took a few other pics along with my other belts to give an idea on size wise, three are the same size at 1-1/8", the next two are 1-1/2", and lastly that new one is 1-3/4"! All five of the others are by Bison, and that new one is by S.O.Tech, all six to be American made! One thing I did notice is on the bottom between the buckle and the loop, there is a red stitch, kinda as if the stitching was to give way it's a warning to say, don't even think of using it! Other then that I think I did good?
JR


What a NICE collection of belts you have there. As for me, I have had the absolute WORST luck with belts. I tend to buy what I think will be quality but before I know it, it's all twisted/torn/tattered to hell! Maybe I need to change up and buy some like yours. How do you find them holding up for you?
Ty, I must say the only bad luck I had with a belt was when I got one of those lever action military looking ones? You slid the belt through then the buckle locked down with teeth,, that thing didn't last to long, the teeth shredded the belt! I used to have leather belts but I just couldn't stand the fact that after you ate or donated to the porcelain gods, you had to adjust by a whole inch, and it just never felt "just right" that's why all of mine are those, that and in case of an emergency they can be used as a tourniquet. Don't ask, but ever since I was like 12, that's what I've had to have! As for the belts you see, I haven't had a problem with, of course the two that I just got I haven't used yet. The only downer, is every once and a while it felt as if the belt gave out a little and I had to give it a little tighten, but that could also be because I don't have any hips, the gut pushes down and the back end is small, so nothing holds anything up! But as for the belt, they've done their duty, and they still look like new and are like
over 8yrs old! One of my fav is the 4th one from the left, it's a mini riggers, it's actually what I have on now.. lol. If you got any questions ask away!My bad, over 6yrs, I got them for my bday in 2009
JR -
Mini-Tool

-
MP600 Basic but oh so pretty!!!

-
Got the Screwpop combo screwdriver, wrench, and carbiner light off Ebay for $7.95 shipped:
(not my picture)The twist on the LED light for shutting it on and off is a bit finicky. But I'm still very happy for what I paid for all three. The vendor has one left if anyone is interested: http://www.ebay.com/itm/262009425224
-
[quote author=SAKnight link=topic=50835.msg1145195#msg1145195 date=1441139518]
[quote author=firiki link=topic=50835.msg1144912#msg1144912 date=1441108473]
[quote author=SAKnight link=topic=50835.msg1144782#msg1144782 date=1441083448]
Thanks, I love the BK4. Put a dent in the edge right off the bat
But it's a tank, for sure. Can't wait to get it in the woods!Ouch. I hope it's not a deep one :ahhh
Worked it out well enough with a little steel I've got
You know what they say- Beckers work for a living!You can kinda see it. It's not blunt anymore, so it's cool. Also, got my little prybar in!
Good to hear that. I hate dents on knife edges. Now, maybe give it a bit of (sand-paper) stropping ? >:DThat lil' prybar is very intriguing, I've considered getting one many times. Simple design, I like that.
It's about to meet a bath of paint stripper, then hopefully a date with a bit of sandpaper :D
The prybar was one from grants $2 list, when I found it it was $2.something shipped, couldn't pass it up! Great finish, seems stout too!
[/quote]Why remove the coating? I'm not a fan of blacked-out gear but I'd leave it there just to see how durable it is, if nothing else.
Tempted for a mini prybar, though I'll probably never use it... :ahhh
[/quote]I kept telling myself I would. But the call of bare steel is one that must be answered. And uncoated carbon steel? Well, that is the stuff dreams are made of

Mostly I just like that it's a little more 'mine', and will show use now. Plus I love the look.Anyone know why it's blue halfway up

[/quote]
I know what you're saying :D However, I recently got me a Glock 81 knife -I'll do a small write-up about it eventually- that comes with a black, anti-corrosive coating; "phospate treaded" reads the description. I'm inclined to leave the coating on the blade because it seems these knives can rust easily. I may have to remove it, if the coating isn't durable after all, but that would be for keeping the knife oiled and clean. That's why I was asking. About blueing, I'm no expert but I'd hazard it's probably meant to prepare the BK4 for some touch chores, make it more rust resistant and less brittle. What about the rest of the blade though 
First thoughts on the Glock knife? Loving it
it can use some sharpening and perhaps honing if one is up to it but it came sharp enough to be a worthy camp knife. Very lightweiht and yet tough, provides good grip, in one word; substantial. :ahhh
-
New toy:
Vic Sentinel OHO Serrated w/pocket clip (not my favourite blade type but Vic's serrations are not very agressive).

By not very aggressive you mean not very pointy, I take it? Pray you don't cut yourself with that thing!
(Not a blade for N_N_R, that one ::) )
Yeah, the Vic serrations are wavy and subtle. Spyderco, for instance, got some very pointy and marked serrations. Don't let it fool you, though. This mother smurfer cuts like a mother smurfer! Should be called Vic's light saber!
:ahhh :ahhh :ahhh :ahhh
Just the other day my wife cut almost all the way through a new kitchen sponge with a Vic wavy paring knife while doing the dishes and she didn't even notice

-
... What I believe is a Carolina Tool Gerber Knockoff.
-
Freaver- aren't they the best?? They just seem so superior, it makes you question the status quo. Stretchy belts forever!
Raistlin- same kit I got, I love it! Great value, and according to the website, it seems to imply at least the one piecer is us made? I've gotten some decent use out of them so far!

Firiki- yeah, in reality, it's better to leave the coating on if you ever intend to use the knife hard, know you may put it away wet, leave it in the rain or something. It's more reliable and low maintenance, great traits for a tool. I simply love the aesthetics of steel, and everything about it fascinates me- especially forcing patinas etc. :D
As for the bluing? I think it's temper-related. It was there when I stripped the blade
It went away when I first put a patina on, but has since come back. Strange. This one is bare metal, with just a mild ketchup patina, to prevent rust from sitting. Though 50-100b seems resistant enough, I haven't found a speck on any beckers yet 
I'd recommend a hot apple cider vinegar patina, it looks pretty good, it looks like the glock is 1095, which is the only steel I've had really rust on me (Mora). I put a vinegar patina on that (heat blade on flame for a second, wipe with patina, repeat- I can go into more details in a pm if you like).
Looks like a solid knife though, something you could really manhandle. But the low hardness has me question edge retention, is yours the military or civilian version?
-
Decided to return the HK and get a Kershaw Emerson CQC-7K.

-
@campussecurity said:
Decided to return the HK and get a Kershaw Emerson CQC-7K.
Nice! I've found the tanto to have useful edc applications- namely plastic packaging! Stabs through anything though! And the sharpened corner on the edge is great for scoring. And I'm a huge fan of 8cr, great value there!

-
A Vise-grip 5wr multi-plier.
-
Evo 10

The photo doesn't do the orange justice it is super bright hunter orange.
Sak's rule !
-
Finally got a Kershaw A100

-
^ Cool tool

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login