And so it begins.... (My adventures into Alox!)
-
Your implementation of the cross is way way better/superior - In fact very clever
SB's is pretty rubbish - IMHO - Although nice to have the tp.Anyway - I thought he did not do/approve of mods ??
-
Besides aesthetics, I think the +B ones are glued on or press fitted?
In any way, the alox style with pins through the scales is far superior. -
Good to see you, Crackout!
And
on the SB Syph Knockoff scales.
I´m fine if someone makes their own attempt on Alox scales for 91mm, but it should be visible it is really THEIR OWN attempt, IMHO.
Never mind, if I need an Alox conversion I´ll ask on MTO, we have plenty of original makers/artists here.And, as Oscar Wilde put it: imitation is the sincerest form of flattery - So someone might have been impressed by your work. Take it as a compliment.
-
Ya I dont care so much really, its just funny to me that he thinks modders are dirty scum, but he can derive 'inspiration' from my work.
Stick on scales arent the way to go for an upgrade anyhow as it doesnt give it the alox look or feel, and you have to keep the outer liners that way. He also had made 'prototype' scales before that he never actually followed through on, so I'd be very surprised to see these actually produced.
-
Ecactly my thoughts, Robert. He has had some nice products over the years, and I found Swissbianco Canada to be a pleasant business partner but what i read from him and about him was not always positive, to say teh least. And I don´t understand his hatred for modders the least.
-
Lowtech and Huntsman nailed it with their responses. The sb scales look "unrefined" vs yours.
-
I only have one of Syph's pieces but I have a couple of SB knives. I can definitely say that Syph's pieces are in a different league. The back springs and attention to detail are incredible. I suspect SB hates modders because they undercut his "special" relationship with Victorinox.
Sent from Tracy Island
-
I so need one of those black explorers.
-
Syph - Two questions about 93mm configurations: Could the hawkbill from a Harvester be put opposite the main blade or would something like a Pruner need to be used (where the hawkbill is already in that spot); are the same backsprings used for the 1.5 layer Phillips/2 opener layer as for seperate Phillips/bottle opener and hawkbill/can opener layers...trying to understand if the difference in width is just the liner. Thanks man.
-
@tommywp said:
Syph - Two questions about 93mm configurations: Could the hawkbill from a Harvester be put opposite the main blade or would something like a Pruner need to be used (where the hawkbill is already in that spot); are the same backsprings used for the 1.5 layer Phillips/2 opener layer as for seperate Phillips/bottle opener and hawkbill/can opener layers...trying to understand if the difference in width is just the liner. Thanks man.The pruner blade is the same shape in either spot, just slightly bent differently. I have used them interchangeably with no issues.
The triple tool layer with the phillips uses 2 standard opener layer springs. The can opener position can be occupied by the can opener, eblade or pruner blade.

-
Syph007, is it possible to add a small blade next to the Philips on the triple layer, like the penknife or the pruner?
-
@Sakpan74Gr said:
Syph007, is it possible to add a small blade next to the Philips on the triple layer, like the penknife or the pruner?Not enough room no.
-
I did so many Ti 91mm mods, I used up the rest of my scales so I got another hunk of Ti cut into parts.
Lots of sizes here...
84mm front, backs, and backs with no cutout.
91mm front, backs, and backs with no cutout.
93mm fronts and backs.
-
@Syph007 said:
I did so many Ti 91mm mods, I used up the rest of my scales so I got another hunk of Ti cut into parts.Lots of sizes here...
84mm front, backs, and backs with no cutout.
91mm front, backs, and backs with no cutout.
93mm fronts and backs.
Don't suppose you have some 84mm scissor backsprings coming to go with those 84mm scales?
-
I did so many Ti 91mm mods, I used up the rest of my scales so I got another hunk of Ti cut into parts.
Lots of sizes here...
84mm front, backs, and backs with no cutout.
91mm front, backs, and backs with no cutout.
93mm fronts and backs.
Don't suppose you have some 84mm scissor backsprings coming to go with those 84mm scales?
I actually made the decision to run those when Victorinox said they are going to be doing 93mm with scissors (which I've heard no updates on but I hope they still plan to), so yes its on the list to make but there are a few things ahead of that still that I already have materials for. 20% of the emails I get are from people wanting 84mm mods with scissors... so... I know there is a demand. :D
-
What about demand for the triple tool layer on the 91mm?

-
@KaySuave said:
What about demand for the triple tool layer on the 91mm?
It would be popular if it was possible. Cant do it though.
The most popular mod I do those is the super tinker, which is kind of the same tools as that model, but on 91. I know the backside phillips is a compromise though.
I will probably end up making some wenger style wrenches to pair with the top side phillips as lots of people want inline phillips but not the plastic mag glass.
-
What about demand for the triple tool layer on the 91mm?

It would be popular if it was possible. Cant do it though.
The most popular mod I do those is the super tinker, which is kind of the same tools as that model, but on 91. I know the backside phillips is a compromise though.
I will probably end up making some wenger style wrenches to pair with the top side phillips as lots of people want inline phillips but not the plastic mag glass.
Why not make a metal mag glass?
-
What about demand for the triple tool layer on the 91mm?

It would be popular if it was possible. Cant do it though.
The most popular mod I do those is the super tinker, which is kind of the same tools as that model, but on 91. I know the backside phillips is a compromise though.
I will probably end up making some wenger style wrenches to pair with the top side phillips as lots of people want inline phillips but not the plastic mag glass.
Why not make a metal mag glass?
Hard to see through!

But yes I will cut some Ti ones for an upgrade option. I have some Ti being cut in a few weeks that is the right thickness so I'll have some cut then.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


