And so it begins.... (My adventures into Alox!)
-
Syph - Two questions about 93mm configurations: Could the hawkbill from a Harvester be put opposite the main blade or would something like a Pruner need to be used (where the hawkbill is already in that spot); are the same backsprings used for the 1.5 layer Phillips/2 opener layer as for seperate Phillips/bottle opener and hawkbill/can opener layers...trying to understand if the difference in width is just the liner. Thanks man.
-
@tommywp said:
Syph - Two questions about 93mm configurations: Could the hawkbill from a Harvester be put opposite the main blade or would something like a Pruner need to be used (where the hawkbill is already in that spot); are the same backsprings used for the 1.5 layer Phillips/2 opener layer as for seperate Phillips/bottle opener and hawkbill/can opener layers...trying to understand if the difference in width is just the liner. Thanks man.The pruner blade is the same shape in either spot, just slightly bent differently. I have used them interchangeably with no issues.
The triple tool layer with the phillips uses 2 standard opener layer springs. The can opener position can be occupied by the can opener, eblade or pruner blade.

-
Syph007, is it possible to add a small blade next to the Philips on the triple layer, like the penknife or the pruner?
-
@Sakpan74Gr said:
Syph007, is it possible to add a small blade next to the Philips on the triple layer, like the penknife or the pruner?Not enough room no.
-
I did so many Ti 91mm mods, I used up the rest of my scales so I got another hunk of Ti cut into parts.
Lots of sizes here...
84mm front, backs, and backs with no cutout.
91mm front, backs, and backs with no cutout.
93mm fronts and backs.
-
@Syph007 said:
I did so many Ti 91mm mods, I used up the rest of my scales so I got another hunk of Ti cut into parts.Lots of sizes here...
84mm front, backs, and backs with no cutout.
91mm front, backs, and backs with no cutout.
93mm fronts and backs.
Don't suppose you have some 84mm scissor backsprings coming to go with those 84mm scales?
-
I did so many Ti 91mm mods, I used up the rest of my scales so I got another hunk of Ti cut into parts.
Lots of sizes here...
84mm front, backs, and backs with no cutout.
91mm front, backs, and backs with no cutout.
93mm fronts and backs.
Don't suppose you have some 84mm scissor backsprings coming to go with those 84mm scales?
I actually made the decision to run those when Victorinox said they are going to be doing 93mm with scissors (which I've heard no updates on but I hope they still plan to), so yes its on the list to make but there are a few things ahead of that still that I already have materials for. 20% of the emails I get are from people wanting 84mm mods with scissors... so... I know there is a demand. :D
-
What about demand for the triple tool layer on the 91mm?

-
@KaySuave said:
What about demand for the triple tool layer on the 91mm?
It would be popular if it was possible. Cant do it though.
The most popular mod I do those is the super tinker, which is kind of the same tools as that model, but on 91. I know the backside phillips is a compromise though.
I will probably end up making some wenger style wrenches to pair with the top side phillips as lots of people want inline phillips but not the plastic mag glass.
-
What about demand for the triple tool layer on the 91mm?

It would be popular if it was possible. Cant do it though.
The most popular mod I do those is the super tinker, which is kind of the same tools as that model, but on 91. I know the backside phillips is a compromise though.
I will probably end up making some wenger style wrenches to pair with the top side phillips as lots of people want inline phillips but not the plastic mag glass.
Why not make a metal mag glass?
-
What about demand for the triple tool layer on the 91mm?

It would be popular if it was possible. Cant do it though.
The most popular mod I do those is the super tinker, which is kind of the same tools as that model, but on 91. I know the backside phillips is a compromise though.
I will probably end up making some wenger style wrenches to pair with the top side phillips as lots of people want inline phillips but not the plastic mag glass.
Why not make a metal mag glass?
Hard to see through!

But yes I will cut some Ti ones for an upgrade option. I have some Ti being cut in a few weeks that is the right thickness so I'll have some cut then.
-
Aloxplorer!


-
What about demand for the triple tool layer on the 91mm?

It would be popular if it was possible. Cant do it though.
The most popular mod I do those is the super tinker, which is kind of the same tools as that model, but on 91. I know the backside phillips is a compromise though.
I will probably end up making some wenger style wrenches to pair with the top side phillips as lots of people want inline phillips but not the plastic mag glass.
Why not make a metal mag glass?
Hard to see through!

But yes I will cut some Ti ones for an upgrade option. I have some Ti being cut in a few weeks that is the right thickness so I'll have some cut then.

Seriously, I'll be in for a Ti-mag + wrench layer.
-
Aloxsome!!!!!!!!!

-
Like the way you're going with the custom tools

-
I put in a full day today and got 3 finished. This is the second one. :D



-
Last one is a Ti 91mm. Not everyone was a fan of the cross on the front scale so I made some plain ones too.
This is 4mm thinner than a standard compact.




-
Nice batch today Syph

Sent from my SM-G920R4 using Tapatalk
-
@Syph007 said:
Last one is a Ti 91mm. Not everyone was a fan of the cross on the front scale so I made some plain ones too.This is 4mm thinner than a standard compact.




I guess that in that configuration, with Ti scales, more stable liners, and serious screws, the backside Phillips is able to transfer and survive a lot more torque.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
