Toolslinger's ST300 XD
-
The exchanger is unique to the ST300 EOD as far as I know.
It is definitely not the same as on either the old or new Surge as I have both to compare to.
I think the Surge one would take a lot more work to get it to fit as it's designed to use a liner lock and not the tab lock that is on the ST300. I'm also pretty sure it is thicker and would require re-jigging of the internal tools. As it is now, I didn't have to drop anything other than a knife (which was redundant for me).
The adapter for the EOD takes the standard t-shank blades but will not take the ones that come packaged with the Surge as they are too thick to allow the tool to close properly (both into the handle and around the t-shank).
-
Thanks, I never knew that. Love learning and certainly no matter how long I'm here I often learn something new.
It would be a great addition to the ST300. ST300 II possibly since most will never need the EOD version.
-
Here is v2 of the ST300 XD.
I dropped the can opener, small driver and file.
I added the large bit driver and lanyard ring.
It also got a snazzy red paint inlay to match my EDC gear colour scheme.
-
Nice work mate.

-
Great job

-
@Toolslinger said:
Here is v2 of the ST300 XD.I dropped the can opener, small driver and file.
I added the large bit driver and lanyard ring.
It also got a snazzy red paint inlay to match my EDC gear colour scheme.
It looks good. Now, how about giving it a small nose job? >:D -
Nice work mate.

Thanks!
I really prefer it now that it has the bit driver. I encounter a fair number of Robertson #2 and Hex 4mm around these parts and having the driver built in instead of using the adapter is a huge win in my books.
I'm with you on that.

-
Nice work there

-
Here is v2 of the ST300 XD.
I dropped the can opener, small driver and file.
I added the large bit driver and lanyard ring.
It also got a snazzy red paint inlay to match my EDC gear colour scheme.
It looks good. Now, how about giving it a small nose job? >:DThanks!
Nose job is a negatory. More use for the finer tips than blunter ones.
-
Excellent way to compliment ST300's great tool selection, outstanding sir!!!

-
Fantastic! I absolutly love that tool load out, especially paired with a good folder. Whats your reasoning for dropping the file for the wood saw when you have the blade exchanger? Are you pocket carrying? (That would explain the lanyard ring)
-
@sLaughterMed said:
Fantastic! I absolutly love that tool load out, especially paired with a good folder. Whats your reasoning for dropping the file for the wood saw when you have the blade exchanger? Are you pocket carrying? (That would explain the lanyard ring)Thanks!

I dropped the file as my EDC SAK has it and I prefer the Vic one over the one in the ST300 (I still prefer my LM diamond file more, but am not going to put one in).
The blade exchanger on the ST300EOD will not fit the Surge file. It only accepts the thinner jigsaw size blades. I keep a metal cutting blade ready in the tool.
The wood saw is a nice small backup tool. I typically have access to proper saws.
I carry in a belt sheath with bit extender, bit kit and Croc. The lanyard is there as there isn't much space left for another tool so it's either washer or lanyard to take up the space to get the pivot tension right. Plus I do occasionally have to use it in places where I'd rather not drop it, so a lanyard can be quickly added when needed.
-
Fantastic! I absolutly love that tool load out, especially paired with a good folder. Whats your reasoning for dropping the file for the wood saw when you have the blade exchanger? Are you pocket carrying? (That would explain the lanyard ring)
Thanks!

I dropped the file as my EDC SAK has it and I prefer the Vic one over the one in the ST300 (I still prefer my LM diamond file more, but am not going to put one in).
The blade exchanger on the ST300EOD will not fit the Surge file. It only accepts the thinner jigsaw size blades. I keep a metal cutting blade ready in the tool.
The wood saw is a nice small backup tool. I typically have access to proper saws.
I carry in a belt sheath with bit extender, bit kit and Croc. The lanyard is there as there isn't much space left for another tool so it's either washer or lanyard to take up the space to get the pivot tension right. Plus I do occasionally have to use it in places where I'd rather not drop it, so a lanyard can be quickly added when needed.
Ok, the lanyard makes a lot of sense in that regard as does losing the file. But why not just carry a wood cutting jig saw in the sheath, and add the small driver or PE blade back in?
-
Fantastic! I absolutly love that tool load out, especially paired with a good folder. Whats your reasoning for dropping the file for the wood saw when you have the blade exchanger? Are you pocket carrying? (That would explain the lanyard ring)
Thanks!

I dropped the file as my EDC SAK has it and I prefer the Vic one over the one in the ST300 (I still prefer my LM diamond file more, but am not going to put one in).
The blade exchanger on the ST300EOD will not fit the Surge file. It only accepts the thinner jigsaw size blades. I keep a metal cutting blade ready in the tool.
The wood saw is a nice small backup tool. I typically have access to proper saws.
I carry in a belt sheath with bit extender, bit kit and Croc. The lanyard is there as there isn't much space left for another tool so it's either washer or lanyard to take up the space to get the pivot tension right. Plus I do occasionally have to use it in places where I'd rather not drop it, so a lanyard can be quickly added when needed.
Ok, the lanyard makes a lot of sense in that regard as does losing the file. But why not just carry a wood cutting jig saw in the sheath, and add the small driver or PE blade back in?
I've twisted the small driver in my Surge and SS ST300, so I'd rather have any other tool instead. Plus I have a handful of other bits and tools on my SAK that will do the same job as well or better.
My goal with my loadout is to not carry a ton of accessories as that necessitates adding them to the pouch and to get the same cutting length on a jigsaw blade would require a bigger pouch to store it in. It's one of the reasons I'm not carrying my Surge (that and the weight).
As for PE blades, I have 2 on my SAK and a dedicated folder in my pocket. It is quite redundant, especially being inside opening. I experimented with the combo blade from the EOD but preferred the shape and function of the full SE for a backup blade.
-
@Toolslinger said:
Here is v2 of the ST300 XD.I dropped the can opener, small driver and file.
I added the large bit driver and lanyard ring.
It also got a snazzy red paint inlay to match my EDC gear colour scheme.

-
Latest iteration. Let's call it the Mark III.

![FullSizeRender[1].jpg](/assets/uploads/_imported_attachments/migrated/273472_FullSizeRender%5B1%5D.jpg)
![FullSizeRender[2].jpg](/assets/uploads/_imported_attachments/migrated/273474_FullSizeRender%5B2%5D.jpg)
![FullSizeRender[3].jpg](/assets/uploads/_imported_attachments/migrated/273476_FullSizeRender%5B3%5D.jpg)
-
No blades? Its the C4 spike function as a marlin spike, or do you work with explosives regularly?
-
@sLaughterMed said:
No blades? Its the C4 spike function as a marlin spike, or do you work with explosives regularly?Nope, no blades. My SAK has 2 and I EDC a folder.
The C4 spike works as a marlin pike/knot picker/paracord fid/GPPT (general purpose pokey thing). Plus it's freaking cool.
I also added the plier head from a MUT so it has the threaded attachment. I'm working on what tools I want to carry that would thread into that connection point.
![FullSizeRender[4].jpg](/assets/uploads/_imported_attachments/migrated/273545_FullSizeRender%5B4%5D.jpg)
-
No blades? Its the C4 spike function as a marlin spike, or do you work with explosives regularly?
Nope, no blades. My SAK has 2 and I EDC a folder.
The C4 spike works as a marlin pike/knot picker/paracord fid/GPPT (general purpose pokey thing). Plus it's freaking cool.
I also added the plier head from a MUT so it has the threaded attachment. I'm working on what tools I want to carry that would thread into that connection point.
Doesn't the C4 spike unscrew as well? Do any other tools thread into it?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login