Toolslinger's ST300 XD
-
Great job

-
@Toolslinger said:
Here is v2 of the ST300 XD.I dropped the can opener, small driver and file.
I added the large bit driver and lanyard ring.
It also got a snazzy red paint inlay to match my EDC gear colour scheme.
It looks good. Now, how about giving it a small nose job? >:D -
Nice work mate.

Thanks!
I really prefer it now that it has the bit driver. I encounter a fair number of Robertson #2 and Hex 4mm around these parts and having the driver built in instead of using the adapter is a huge win in my books.
I'm with you on that.

-
Nice work there

-
Here is v2 of the ST300 XD.
I dropped the can opener, small driver and file.
I added the large bit driver and lanyard ring.
It also got a snazzy red paint inlay to match my EDC gear colour scheme.
It looks good. Now, how about giving it a small nose job? >:DThanks!
Nose job is a negatory. More use for the finer tips than blunter ones.
-
Excellent way to compliment ST300's great tool selection, outstanding sir!!!

-
Fantastic! I absolutly love that tool load out, especially paired with a good folder. Whats your reasoning for dropping the file for the wood saw when you have the blade exchanger? Are you pocket carrying? (That would explain the lanyard ring)
-
@sLaughterMed said:
Fantastic! I absolutly love that tool load out, especially paired with a good folder. Whats your reasoning for dropping the file for the wood saw when you have the blade exchanger? Are you pocket carrying? (That would explain the lanyard ring)Thanks!

I dropped the file as my EDC SAK has it and I prefer the Vic one over the one in the ST300 (I still prefer my LM diamond file more, but am not going to put one in).
The blade exchanger on the ST300EOD will not fit the Surge file. It only accepts the thinner jigsaw size blades. I keep a metal cutting blade ready in the tool.
The wood saw is a nice small backup tool. I typically have access to proper saws.
I carry in a belt sheath with bit extender, bit kit and Croc. The lanyard is there as there isn't much space left for another tool so it's either washer or lanyard to take up the space to get the pivot tension right. Plus I do occasionally have to use it in places where I'd rather not drop it, so a lanyard can be quickly added when needed.
-
Fantastic! I absolutly love that tool load out, especially paired with a good folder. Whats your reasoning for dropping the file for the wood saw when you have the blade exchanger? Are you pocket carrying? (That would explain the lanyard ring)
Thanks!

I dropped the file as my EDC SAK has it and I prefer the Vic one over the one in the ST300 (I still prefer my LM diamond file more, but am not going to put one in).
The blade exchanger on the ST300EOD will not fit the Surge file. It only accepts the thinner jigsaw size blades. I keep a metal cutting blade ready in the tool.
The wood saw is a nice small backup tool. I typically have access to proper saws.
I carry in a belt sheath with bit extender, bit kit and Croc. The lanyard is there as there isn't much space left for another tool so it's either washer or lanyard to take up the space to get the pivot tension right. Plus I do occasionally have to use it in places where I'd rather not drop it, so a lanyard can be quickly added when needed.
Ok, the lanyard makes a lot of sense in that regard as does losing the file. But why not just carry a wood cutting jig saw in the sheath, and add the small driver or PE blade back in?
-
Fantastic! I absolutly love that tool load out, especially paired with a good folder. Whats your reasoning for dropping the file for the wood saw when you have the blade exchanger? Are you pocket carrying? (That would explain the lanyard ring)
Thanks!

I dropped the file as my EDC SAK has it and I prefer the Vic one over the one in the ST300 (I still prefer my LM diamond file more, but am not going to put one in).
The blade exchanger on the ST300EOD will not fit the Surge file. It only accepts the thinner jigsaw size blades. I keep a metal cutting blade ready in the tool.
The wood saw is a nice small backup tool. I typically have access to proper saws.
I carry in a belt sheath with bit extender, bit kit and Croc. The lanyard is there as there isn't much space left for another tool so it's either washer or lanyard to take up the space to get the pivot tension right. Plus I do occasionally have to use it in places where I'd rather not drop it, so a lanyard can be quickly added when needed.
Ok, the lanyard makes a lot of sense in that regard as does losing the file. But why not just carry a wood cutting jig saw in the sheath, and add the small driver or PE blade back in?
I've twisted the small driver in my Surge and SS ST300, so I'd rather have any other tool instead. Plus I have a handful of other bits and tools on my SAK that will do the same job as well or better.
My goal with my loadout is to not carry a ton of accessories as that necessitates adding them to the pouch and to get the same cutting length on a jigsaw blade would require a bigger pouch to store it in. It's one of the reasons I'm not carrying my Surge (that and the weight).
As for PE blades, I have 2 on my SAK and a dedicated folder in my pocket. It is quite redundant, especially being inside opening. I experimented with the combo blade from the EOD but preferred the shape and function of the full SE for a backup blade.
-
@Toolslinger said:
Here is v2 of the ST300 XD.I dropped the can opener, small driver and file.
I added the large bit driver and lanyard ring.
It also got a snazzy red paint inlay to match my EDC gear colour scheme.

-
Latest iteration. Let's call it the Mark III.

![FullSizeRender[1].jpg](/assets/uploads/_imported_attachments/migrated/273472_FullSizeRender%5B1%5D.jpg)
![FullSizeRender[2].jpg](/assets/uploads/_imported_attachments/migrated/273474_FullSizeRender%5B2%5D.jpg)
![FullSizeRender[3].jpg](/assets/uploads/_imported_attachments/migrated/273476_FullSizeRender%5B3%5D.jpg)
-
No blades? Its the C4 spike function as a marlin spike, or do you work with explosives regularly?
-
@sLaughterMed said:
No blades? Its the C4 spike function as a marlin spike, or do you work with explosives regularly?Nope, no blades. My SAK has 2 and I EDC a folder.
The C4 spike works as a marlin pike/knot picker/paracord fid/GPPT (general purpose pokey thing). Plus it's freaking cool.
I also added the plier head from a MUT so it has the threaded attachment. I'm working on what tools I want to carry that would thread into that connection point.
![FullSizeRender[4].jpg](/assets/uploads/_imported_attachments/migrated/273545_FullSizeRender%5B4%5D.jpg)
-
No blades? Its the C4 spike function as a marlin spike, or do you work with explosives regularly?
Nope, no blades. My SAK has 2 and I EDC a folder.
The C4 spike works as a marlin pike/knot picker/paracord fid/GPPT (general purpose pokey thing). Plus it's freaking cool.
I also added the plier head from a MUT so it has the threaded attachment. I'm working on what tools I want to carry that would thread into that connection point.
Doesn't the C4 spike unscrew as well? Do any other tools thread into it?
-
No blades? Its the C4 spike function as a marlin spike, or do you work with explosives regularly?
Nope, no blades. My SAK has 2 and I EDC a folder.
The C4 spike works as a marlin pike/knot picker/paracord fid/GPPT (general purpose pokey thing). Plus it's freaking cool.
I also added the plier head from a MUT so it has the threaded attachment. I'm working on what tools I want to carry that would thread into that connection point.
Doesn't the C4 spike unscrew as well? Do any other tools thread into it?
It does unscrew. There is a disassembly punch from the MUT that will fit. There are probably other parts as well, I just haven't gone looking yet.
-
Well done.
I'll take two.
-
@HarleyXJGuy said:
Well done.I'll take two.
Thanks.
Lol, you send me the parts/tools and I'll build them for you. ;)
-
Well done.
I'll take two.
Thanks.
Lol, you send me the parts/tools and I'll build them for you. ;)
Deal.
-
I'd like to do alot that you have. I have my EOD. Have a MUT plier head on the way from Loki.
I was wondering about machining a bit holder so that it would either thread in place of the C4 spike or thread into the hole in the handle into the MUT head.
Sent from my Nexus 6 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login