And so it begins.... (My adventures into Alox!)
-
@Syph007 said:
Last one is a Ti 91mm. Not everyone was a fan of the cross on the front scale so I made some plain ones too.This is 4mm thinner than a standard compact.




I guess that in that configuration, with Ti scales, more stable liners, and serious screws, the backside Phillips is able to transfer and survive a lot more torque.
-
Last one is a Ti 91mm. Not everyone was a fan of the cross on the front scale so I made some plain ones too.
This is 4mm thinner than a standard compact.




I guess that in that configuration, with Ti scales, more stable liners, and serious screws, the backside Phillips is able to transfer and survive a lot more torque.
Great observation, never thought about it.
So Syph is this true?
-
@Syph007 said:
I finally got around to ordering some mokume since Ive got more Ti scale blanks coming in next week for 84, 91 and 93 mm mods with the cross cutout. I wanted some more options other than brass and aluminum to fill the cross with.I couldnt decide so I ordered both the classic and white mokume, examples here on the knife scales. Should look interesting as the cross inlay I think. :D

Well anyone interested in mokume can skip this stuff! Got it in yesterday expecting you know metal... its not. Feels like plastic. So I think if there is any metal content in there its LOW. Not impressed at all. Since its not metal it wont flow and I cant use it for inlays.
So I am annoyed and now making my own furnace with a propane torch and blocks and will weld forge some brass / nickel silver myself and see what type of mokume I can come up with.
-
That is a shame. Hope you didn't invest to much into it.
On an unrelated subject, lets say I wanted a Alox SAK modded but instead of the screws you use normally could you peen it? Pretty sure I have seen you dk this before.
-
@HarleyXJGuy said:
That is a shame. Hope you didn't invest to much into it.On an unrelated subject, lets say I wanted a Alox SAK modded but instead of the screws you use normally could you peen it? Pretty sure I have seen you dk this before.
I can do that ya, Im just not an expert at hand rivetting. I can make work fine, but making the heads look perfect is pretty tough.
-
That is a shame. Hope you didn't invest to much into it.
On an unrelated subject, lets say I wanted a Alox SAK modded but instead of the screws you use normally could you peen it? Pretty sure I have seen you dk this before.
I can do that ya, Im just not an expert at hand rivetting. I can make work fine, but making the heads look perfect is pretty tough.
No need for perfect.
It is for the OC Pioneer I got from Aloha. It has weak snap and no brass liners. Plan to have it modded a little and brass liners added. Will be a beater patina SAK.
-
I havent done a Ti 93 in awhile, but this one was born today. :D




The trick to making this look good on the back side was to grind the scales, liners and springs all together so they mated up well.

Watch out its sharp! :D

-
Nice one Syph.
Sent from my SM-G920R4 using Tapatalk
-
Lots of elbow grease went into this hunk of metal... Brass, copper, Ti and steel. No plastic.... :D




-
Very nice

-
What Steve said

-
What Steve and the other guy said.
-
Syph - Two questions about 93mm configurations: Could the hawkbill from a Harvester be put opposite the main blade or would something like a Pruner need to be used (where the hawkbill is already in that spot); are the same backsprings used for the 1.5 layer Phillips/2 opener layer as for seperate Phillips/bottle opener and hawkbill/can opener layers...trying to understand if the difference in width is just the liner. Thanks man.
The pruner blade is the same shape in either spot, just slightly bent differently. I have used them interchangeably with no issues.
The triple tool layer with the phillips uses 2 standard opener layer springs. The can opener position can be occupied by the can opener, eblade or pruner blade.

One more question on this...if the inline Phillips is opposite the bottle opener is 1 standard opener layer spring used or something thicker? Thanks.
-
Syph - Two questions about 93mm configurations: Could the hawkbill from a Harvester be put opposite the main blade or would something like a Pruner need to be used (where the hawkbill is already in that spot); are the same backsprings used for the 1.5 layer Phillips/2 opener layer as for seperate Phillips/bottle opener and hawkbill/can opener layers...trying to understand if the difference in width is just the liner. Thanks man.
The pruner blade is the same shape in either spot, just slightly bent differently. I have used them interchangeably with no issues.
The triple tool layer with the phillips uses 2 standard opener layer springs. The can opener position can be occupied by the can opener, eblade or pruner blade.

One more question on this...if the inline Phillips is opposite the bottle opener is 1 standard opener layer spring used or something thicker? Thanks.
I use a blade layer spring for that.
-
There are many nice examples of the two opener tools opposite of the phillips screwdriver in one layer.
Is it also possible to install both the can opener and the cap lifter opposite of the mag glass (on either 91 or 93mm) or is the cap lifter colliding with the mag glass frame?
-
@windson said:
There are many nice examples of the two opener tools opposite of the phillips screwdriver in one layer.Is it also possible to install both the can opener and the cap lifter opposite of the mag glass (on either 91 or 93mm) or is the cap lifter colliding with the mag glass frame?
Yes its possible but i think i usually had to shorten the mag glass to get it to fit.
-
There are many nice examples of the two opener tools opposite of the phillips screwdriver in one layer.
Is it also possible to install both the can opener and the cap lifter opposite of the mag glass (on either 91 or 93mm) or is the cap lifter colliding with the mag glass frame?
Yes its possible but i think i usually had to shorten the mag glass to get it to fit.
Wait are we saying mag glass will go opposite the double opening layer on a 91mm and fit?
-
There are many nice examples of the two opener tools opposite of the phillips screwdriver in one layer.
Is it also possible to install both the can opener and the cap lifter opposite of the mag glass (on either 91 or 93mm) or is the cap lifter colliding with the mag glass frame?
Yes its possible but i think i usually had to shorten the mag glass to get it to fit.
Wait are we saying mag glass will go opposite the double opening layer on a 91mm and fit?
That's what we are trying to establish.
-
There are many nice examples of the two opener tools opposite of the phillips screwdriver in one layer.
Is it also possible to install both the can opener and the cap lifter opposite of the mag glass (on either 91 or 93mm) or is the cap lifter colliding with the mag glass frame?
Yes its possible but i think i usually had to shorten the mag glass to get it to fit.
Wait are we saying mag glass will go opposite the double opening layer on a 91mm and fit?
That's what we are trying to establish.
The 93mm size, not possible at all on the 91.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login