And so it begins.... (My adventures into Alox!)
-
What Steve said

-
What Steve and the other guy said.
-
Syph - Two questions about 93mm configurations: Could the hawkbill from a Harvester be put opposite the main blade or would something like a Pruner need to be used (where the hawkbill is already in that spot); are the same backsprings used for the 1.5 layer Phillips/2 opener layer as for seperate Phillips/bottle opener and hawkbill/can opener layers...trying to understand if the difference in width is just the liner. Thanks man.
The pruner blade is the same shape in either spot, just slightly bent differently. I have used them interchangeably with no issues.
The triple tool layer with the phillips uses 2 standard opener layer springs. The can opener position can be occupied by the can opener, eblade or pruner blade.

One more question on this...if the inline Phillips is opposite the bottle opener is 1 standard opener layer spring used or something thicker? Thanks.
-
Syph - Two questions about 93mm configurations: Could the hawkbill from a Harvester be put opposite the main blade or would something like a Pruner need to be used (where the hawkbill is already in that spot); are the same backsprings used for the 1.5 layer Phillips/2 opener layer as for seperate Phillips/bottle opener and hawkbill/can opener layers...trying to understand if the difference in width is just the liner. Thanks man.
The pruner blade is the same shape in either spot, just slightly bent differently. I have used them interchangeably with no issues.
The triple tool layer with the phillips uses 2 standard opener layer springs. The can opener position can be occupied by the can opener, eblade or pruner blade.

One more question on this...if the inline Phillips is opposite the bottle opener is 1 standard opener layer spring used or something thicker? Thanks.
I use a blade layer spring for that.
-
There are many nice examples of the two opener tools opposite of the phillips screwdriver in one layer.
Is it also possible to install both the can opener and the cap lifter opposite of the mag glass (on either 91 or 93mm) or is the cap lifter colliding with the mag glass frame?
-
@windson said:
There are many nice examples of the two opener tools opposite of the phillips screwdriver in one layer.Is it also possible to install both the can opener and the cap lifter opposite of the mag glass (on either 91 or 93mm) or is the cap lifter colliding with the mag glass frame?
Yes its possible but i think i usually had to shorten the mag glass to get it to fit.
-
There are many nice examples of the two opener tools opposite of the phillips screwdriver in one layer.
Is it also possible to install both the can opener and the cap lifter opposite of the mag glass (on either 91 or 93mm) or is the cap lifter colliding with the mag glass frame?
Yes its possible but i think i usually had to shorten the mag glass to get it to fit.
Wait are we saying mag glass will go opposite the double opening layer on a 91mm and fit?
-
There are many nice examples of the two opener tools opposite of the phillips screwdriver in one layer.
Is it also possible to install both the can opener and the cap lifter opposite of the mag glass (on either 91 or 93mm) or is the cap lifter colliding with the mag glass frame?
Yes its possible but i think i usually had to shorten the mag glass to get it to fit.
Wait are we saying mag glass will go opposite the double opening layer on a 91mm and fit?
That's what we are trying to establish.
-
There are many nice examples of the two opener tools opposite of the phillips screwdriver in one layer.
Is it also possible to install both the can opener and the cap lifter opposite of the mag glass (on either 91 or 93mm) or is the cap lifter colliding with the mag glass frame?
Yes its possible but i think i usually had to shorten the mag glass to get it to fit.
Wait are we saying mag glass will go opposite the double opening layer on a 91mm and fit?
That's what we are trying to establish.
The 93mm size, not possible at all on the 91.
-
[quote author=windson link=topic=34772.msg1156712#msg1156712 date=1443382859]
There are many nice examples of the two opener tools opposite of the phillips screwdriver in one layer.Is it also possible to install both the can opener and the cap lifter opposite of the mag glass (on either 91 or 93mm) or is the cap lifter colliding with the mag glass frame?
Yes its possible but i think i usually had to shorten the mag glass to get it to fit.
Wait are we saying mag glass will go opposite the double opening layer on a 91mm and fit?
That's what we are trying to establish.
The 93mm size, not possible at all on the 91.
[/quote]
Cool cool. I'd rather give up the 3D-Phillips than the mag glass, in this hypothetical configuration. -
[quote author=windson link=topic=34772.msg1156712#msg1156712 date=1443382859]
There are many nice examples of the two opener tools opposite of the phillips screwdriver in one layer.Is it also possible to install both the can opener and the cap lifter opposite of the mag glass (on either 91 or 93mm) or is the cap lifter colliding with the mag glass frame?
Yes its possible but i think i usually had to shorten the mag glass to get it to fit.
Wait are we saying mag glass will go opposite the double opening layer on a 91mm and fit?
That's what we are trying to establish.
The 93mm size, not possible at all on the 91.
[/quote]Dang ok so the struggle continues.
Did you ever figure out a way to carry bits on a 93mm for the CT driver Robert?
-
[quote author=Syph007 link=topic=34772.msg1156797#msg1156797 date=1443393484]
[quote author=windson link=topic=34772.msg1156712#msg1156712 date=1443382859]
There are many nice examples of the two opener tools opposite of the phillips screwdriver in one layer.Is it also possible to install both the can opener and the cap lifter opposite of the mag glass (on either 91 or 93mm) or is the cap lifter colliding with the mag glass frame?
Yes its possible but i think i usually had to shorten the mag glass to get it to fit.
Wait are we saying mag glass will go opposite the double opening layer on a 91mm and fit?
That's what we are trying to establish.
The 93mm size, not possible at all on the 91.
[/quote]Dang ok so the struggle continues.
Did you ever figure out a way to carry bits on a 93mm for the CT driver Robert?
[/quote]So far no. But I still havent even put a CT driver on a 93. :D
Todays project more Ti 91. :D






-
My first 84mm Ti mod! :D And I did the model everyone asks about, bantam + scissors.
I started out I was going to just do a bantam + scissors, but then figured I might as well add the backside phillips as well. :D







Size compared to a standard 91mm

-
So much win.
-
Very nice basic SAK for the minimalist type

Sent from my SM-G920R4 using Tapatalk
-
Those screws look real nice on the custom 84mm scales. Any problem sinking them, like on the 84mm Alox?
-
-
Too bad you're not Swiss. Victorinox could definitely use you.
Sent from Tracy Island
-
@gadgetman7 said:
Too bad you're not Swiss. Victorinox could definitely use you.Sent from Tracy Island
He is from Canada isn't that pretty much the same thing?

-
Too bad you're not Swiss. Victorinox could definitely use you.
Sent from Tracy Island
He is from Canada isn't that pretty much the same thing?

I could be their Canadian Branch! :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login